M A X F I E L D
Op e r at i n g Ma n u a l
W I R L E S S C H A R G I N G
R E C E I V E R G a l a x y S 4 + N F C
NFC contacts
Metal contacts
P r o d u c t o v e r v i e w
Take off the backcover of your smart-
phone to see the inner life of it.
Pull of the sticker on the preset position.
Now align the receiver with the xing
side bottom down and connect the metall
and NFC contacts on the therefore desi-
gnated indentation.
Close your backcover carefully without
slipping away the receiver. Now your
smartphone is capable for wireless
charging.
F i r s t s t e P s
Step 3
Step 2
Step1
3
2
1
s a F e t y N o t e
ATTENTION!
Please do not use a damaged power supply or power socket. Do not use
the product in areas with a temperature range out of -20°C to 40°C. Do
not restore your product in places with high temperature or direct solar
radiation. Do not crinkle or damage the power cord. Do not make it wet
or use it with wet hands. Please keep the product away from metallic
objects as chains, keys etc. and keep it away from the inner of water
heaters, microwaves, high pressure vessel and other kitchen gadgets.
Do not lay any magnetcards, magnetic record media or precise instru-
ments on or near the product. It may have inuence on the function and
the work process. Do not lay the product in places that are easy to fall.
Do not take the product in your mouth. If children are using the product
watch out for the right handling. If the product gets wet please dry it
with a towel and contact our support. Do not try to repair or dismantle
the product on your own. It may cause damage and leads to expire of the
warrenty. People who use a heart-birth-maker should consult a doc-
tor befor using this product. While using it keep a distance from 22cm
because the product can effect the function of the heart-birth-maker.
Products with a QI mark comply with the wireless charing standard spe
-
cication of WPC.
For your own safety, please read the construction manual carefully. Af-
ter opening the package please check it on its completness. The disre-
gard of the safety note may lead to heat, re, burn or frequent electric
shocks. Wrong handling may lead to martial as personelle damage
and in worst cases it may also lead to death.
L i a b i L i t y e x c L u s i o N
Maxeld GmbH
Albert-Einstein-Str.1 . 74722 Buchen, Germany
Telefon: +49 (0) 6281 / 56435-0 . Fax: +49 (0) 6281 / 56435-290
info@maxeld.de . www.maxeld.de/en
• Status 07/2014 • Technical changes reserved • No accountability for falsity and misprint
Because we aren‘t abble to control the charging, the usa-
ge and the observance of the safety notes Maxeld can‘t
take liability for loss, damage and expences. Any claim on
compensation caused by operation, breakdown, failure or
coherent in any way will be declined. For personal injurys
as well as property damage caused by our supply, we won‘t
take liability. Insofar compulsory authorised, our commit-
ment to pay damages, for whatever legal foundation, will be
dened on the invoice value of the product wich is affected
in the incidence. This does not apply when we have to liable
for gross negligence or because of statutory provisions.
IMPORTANT!
/
