M A X F I E L D
Op e r at i n g Ma n u a l
W I R L E S S C H A R G I N G
C A R C H A R G E R
Holding arms
Micro USB port
P r o d u c t o v e r v i e w
USB cable
Micro USB conncection
USB connection
Car charger
Sliding arm
LED indicator
Holding arms
control button
Sliding arm
control button
Inductiv chargingpad
P r o d u c t o v e r v i e w
Suction surface
Fixing plate with glue
surface underneath
Car fan attachement
Fixing hinge
Attachement arm
Suction mount
Air hole mount
Fixing plate
Attache the suction mount with the
charging station and slide it into the
given direction. Now align the suction
mount as you want to. The next step is
to set the attachement arm on „Lock“
and your mount stays on put.
F i r s t s t e P s
Installation with suction mount
The beginning principle is the same
as with the suction mount. Atta-
che and slide. To anchor the air hole
mount you need to pull back the car
fan attachement and hook it into the
car ventilation. The xing hinge will
de-spin the mount.
Installation with air hole mount
1
2
3
1 2
3
F i r s t s t e P s
Positioning on Pad
Pleas try to put your mobile device as centred as possible on your charging
station. You can regulate the horizontal position (see picture 1) with the sli-
ding arm by pushing the sliding arm control button backwards. If you have
no use for it you also can seperate it and keep it away. After adjusting your
mobile device press the holding arms together until your mobile device is
stuck between them. Please watch out that you place your device correctly
(see picture below).
1
2
right WrOng
F i r s t s t e P s
Fixing on car with xing plate
1
2
You also have the possibility to attache your suction mount in your car with
the xing plate. First you take the xing plate and stick it with the glued
surface on a place of your choice in the car ( e.g. car dashboard). Now put
the suction mount on the xing plate and turn the attachement arm to the
left to completely x it.
To use the charging station you need
to, connect it to the electric circuit.
For this just stick the micro USB end
of the USB cable into the charging
station and the ohter end into the car
charger. After that you put the car
charger into the cigar lighter of your
car. Now you are able for inductive
charging of your mobile devicess.
Connection to electric circuit
s a F e t y N o t e
ATTENTION!
Before rst usage please charge the battery of the POWERBANK. Char-
ge the POWERBANK at least once in a period of 12 weeks to provide
damage of the battery. Please do not use a damaged power supply or
power socket. Do not use the product in areas with a temperature ran-
ge out of -20°C to 40°C. Do not restore your product in places with high
temperature or direct solar radiation. Do not crinkle or damage the po-
wer cord. Do not make it wet or use it with wet hands. Please keep the
product away from metallic objects as chains, keys etc. and keep it away
from the inner of water heaters, microwaves, high pressure vessel and
other kitchen gadgets. Do not lay any magnetcards, magnetic record
media or precise instruments on or near the product. It may have in
-
uence on the function and the work process. Do not lay the product
in places that are easy to fall. Do not take the product in your mouth. If
children are using the product watch out for the right handling. If the
product gets wet please dry it with a towel and contact our support. Do
not try to repair or dismantle the product on your own. It may cause da
-
mage and leads to expire of the warrenty. People who use a heart-birth-
maker should consult a doctor befor using this product. While using it
keep a distance from 22cm because the product can effect the function
of the heart-birth-maker. Products with a QI mark comply with the wire
-
less charing standard specication of WPC.
For your own safety, please read the construction manual carefully.
After opening the package please check it on its completeness. The
disregard of the safety note may lead to heat, re, burn or frequent
electric shocks. Wrong handling may lead to martial as personelle da-
mage and in worst cases it may also lead to death.
L i a b i L i t y e x c L u s i o N
Maxeld GmbH
Albert-Einstein-Str.1 . 74722 Buchen, Germany
Telefon: +49 (0) 6281 / 56435-0 . Fax: +49 (0) 6281 / 56435-290
info@maxeld.de . www.maxeld.de/en
• Status 07/2014 • Technical changes reserved • No accountability for falsity and misprint
Because we aren‘t able to control the charging, the usa-
ge and the observance of the safety notes Maxeld can‘t
take liability for loss, damage and expences. Any claim on
compensation caused by operation, breakdown, failure or
coherent in any way will be declined. For personal injurys
as well as property damage caused by our supply, we won‘t
take liability. Insofar compulsory authorised, our commit-
ment to pay damages, for whatever legal foundation, will be
dened on the invoice value of the product wich is affected
in the incidence. This does not apply when we have to liable
for gross negligence or because of statutory provisions.
IMPORTANT!
/
