Promise Technology J310s User manual

Category
NAS & storage servers
Type
User manual

This manual is also suitable for

VTRAK
J610
S
, J310
S
P
RODUCT
M
ANUAL
Version 1.1
VTrak J610s, J310s Product Manual
ii
Copyright
© 2007 Promise Technology, Inc. All Rights Reserved.
Copyright by Promise Technology, Inc. (Promise Technology). No part of this
manual may be reproduced or transmitted in any form without the expressed,
written permission of Promise Technology.
Trademarks
Promise, and the Promise logo are registered in U.S. Patent and Trademark
Office. All other product names mentioned herein may be trademarks or
registered trademarks of their respective companies.
Important data protection information
You should back up all data before installing any drive controller or storage
peripheral. Promise Technology is not responsible for any loss of data resulting
from the use, disuse or misuse of this or any other Promise Technology product.
Notice
Although Promise Technology has attempted to ensure the accuracy of the
content of this manual, it is possible that this document may contain technical
inaccuracies, typographical, or other errors. Promise Technology assumes no
liability for any error in this publication, and for damages, whether direct, indirect,
incidental, consequential or otherwise, that may result from such error, including,
but not limited to loss of data or profits.
Promise Technology provides this publication “as is” without warranty of any
kind, either express or implied, including, but not limited to implied warranties of
merchantability or fitness for a particular purpose.
The published information in the manual is subject to change without notice.
Promise Technology reserves the right to make changes in the product design,
layout, and driver revisions without notification to its users.
This version of the Product Manual supersedes all previous versions.
Recommendations
In this Product Manual, the appearance of products made by other companies,
including, but not limited to software, servers and disk drives, is for the purpose of
illustration and explanation only. Promise Technology does not recommend,
endorse, prefer, or support any product made by another manufacturer.
iii
Contents
Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Architectural Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Warranty and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
CE Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
GOST-R Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
IRAM Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
MIC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Chapter 2: Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Unpacking the VTrak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Mounting VTrak J610s in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Mounting VTrak J310s in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Installing Disk Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Drive Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Setting Up Data Cable Connections . . . . . . . . . . . . . . . . . . . . . . . .20
Basic DAS Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Cascading DAS Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Redundant DAS Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Setting Up Serial Cable Connections . . . . . . . . . . . . . . . . . . . . . . .27
Connecting the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Setting Up the CLI Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Chapter 3: Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Front Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Drive Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
I/O Module Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
CLI Command Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Cable Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Enclosure Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Information List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Viewing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Settings List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Making Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Help Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Link Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
VTrak J610s, J310s Product Manual
iv
Chapter 3: Management, cont.
CLI Command Set, cont.
Viewing Link Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Clearing the Error Count . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Route Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Route Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Uptime Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
VPDR Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
? Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Chapter 4: Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Contacting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Returning Product For Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Appendix A: Second I/O Module . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
1
Chapter 1: Introduction
About This Manual (below)
Overview (page 2)
Architectural Description (page 4)
Features and Benefits (page 5)
Specifications (page 6)
Thank you for purchasing Promise Technology’s VTrak J610s or J310s external
disk array subsystem.
About This Manual
This Product Manual describes how to setup, use and maintain the VTrak J610s
or J310s external disk subsystem. It also describes how to use the built-in
command-line interface (CLI) software.
This manual includes a full table of contents, index, chapter task lists and
numerous cross-references to help you find the specific information you are
looking for.
Also included are four levels of notices:
Note
A Note provides helpful information such as hints or alternative
ways of doing a task.
Important
An Important calls attention to an essential step or point required
to complete a task. Important items include things often missed.
Caution
A Caution informs you of possible equipment damage or loss of
data and how to avoid them.
Warning
A Warning notifies you of probable equipment damage or loss of
data, or the possibility of physical injury, and how to avoid them.
VTrak J610s, J310s Product Manual
2
Overview
The Promise VTrak J610s and J310s are optimized for organizations deploying
cost-effective small-to-medium application clusters, disk-to-disk backup and
midrange storage solutions.
Figure 1. VTrak J610s front view
Figure 2. VTrak J310s front view with bezel removed
The dual 3Gb SAS host interface ports offer the ease of management and
performance required by companies running popular departmental and back-
office applications including file/print, e-mail, database and Web services
Drive Carrier LEDs
Drive Carriers Power and Status LEDs
Drive Carrier LEDs
Drive Carriers Power and Status LEDs
Chapter 1: Introduction
3
Figure 3. VTrak J610s rear view
Figure 4. VTrak J310s rear view
The two external SAS ports provide the needed connectivity and bandwidth for
large capacity solutions requiring multiple JBOD boxes cascaded together while
still providing dual server support and host port failover or aggregation.
115200
8 N 1
115200
8 N 1
Cooling Unit 1
Power Supply 1
Power Supply 2
Cooling Unit 2
I/O module 2I/O module 1
O
I
O
I
115200
8 N 1
115200
8 N 1
Cooling Unit 1
Power Supply 1
Power Supply 2
I/O module 2
Cooling Unit 2
I/O module 1
VTrak J610s, J310s Product Manual
4
Architectural Description
The VTrak J610s packs up to 16 drives per system, offering industry-leading
capacity in just 3U of standard 19-inch rack space. The VTrak J310s supports up
to 12 drives per system, in just 2U of standard 19-inch rack space. The J610s
and J310s unit’s compact form factor maximizes density, increasing capacity per
unit of rack space.
Multiple J610s and J310s systems can also be connected to the same server
using standard SAS features to deliver massive storage to capacity hungry
applications such as disk-to-disk backup, media archiving, video surveillance and
compliance storage
Promise has designed the J610s and J310s chassis to be fully compatible with all
future Promise external storage products. By using the same chassis, drive
carriers, and cooling units, upgrading the RAID controllers and JBOD modules is
fast and simple.
With the VTrak J610s and J310s, Promise has dramatically narrowed the gap
between simple fault tolerance and No Single Point of Failure. The VTrak J610s
and J310s use a fully redundant, hot-swap design and continuously monitors all
system components. It can withstand failures to disks, power supplies, cooling
and I/O modules without interrupting system operation.
Chapter 1: Introduction
5
Features and Benefits
Feature Benefit
3U or 2U 19-inch wide enclosure Installs easily in any standard rackmount.
Supports Serial Attached SCSI
disk drives
Allows you to use the new dual-port SAS
disk drives.
Supports Serial ATA disk drives Allows you to use your legacy SATA disk
drives.
Hot-swap feature for drive carriers,
I/O modules, power supplies and
fans
Allows a defective component to be
replaced without interrupting data
accessibility to the host system.
Tool-less field-replaceable units
(FRUs)
All FRUs can be replaced without tools,
saving time and effort for support personnel.
Complete cable-less design All components easily plug directly into
boards. No cables to complicate setup or
maintenance.
Redundant, hot-swappable cooling
units
Load sharing and full operation even with
multiple failed fans.
Redundant, hot-swappable power
supplies
Load sharing and full operation even with a
failed power supply.
Dual, active/active I/O Modules High level of availability even with a failed
I/O module.
One expansion SAS port I/O
module
Enables cascading JBOD subsystems.
Command-line interface Control and monitoring with simple,
straightforward interface.
Management through in-band SAS
or serial port
Choice of local or network management
options
Compatible with leading SAS HBA
and RAID cards
Easy, works-the-first-time connections with
your current systems
VTrak J610s, J310s Product Manual
6
Specifications
Drive Capacity: J610s, 16 drives. J310s, 12 drives.
External I/O Ports: SAS host port and SAS expansion port.
Supported Disk Interfaces: Serial Attached SCSI (SAS) and Serial ATA (SATA),
3Gb/s and 1.5Gb/s
Supported Operating Systems:
The list above refers to 32-bit and 64-bit versions of the OS in the Host PC or
server. The actual OS support depends upon your SAS HBA or RAID
adapter. Check your SAS HBA or RAID adapter user documentation.
Voltage: 100–240 VAC Auto-ranging.
Current: 8 A @ 100 VAC; 4 A @ 240 VAC Current rating with two power cords
Power Consumption (not including disk drives):
J610s, 108.38 W.
J310s, 100.87 W.
Power Consumption (including disk drives):
J610s, 523.91 W.
J310s, 412.51 W.
Power Supply:
J610s, Dual 500W, 100–240 VAC auto-ranging, 50–60 Hz, dual hot swap and
redundant with PFC, N+1 design.
J310s, Dual 400W, 100–240 VAC auto-ranging, 50–60 Hz, dual hot swap and
redundant with PFC, N+1 design.
Operating Temperature:
5° to 40°C operational
-40° to 60°C non-operational
Relative Humidity: Maximum 95%
Vibration: Random, 0.21 grms, 5 to 500 Hz, 30 Mins, X, Y, Z axis
Windows Vista, Business,
Enterprise, or Ultimate
Windows 2003 Server
Windows XP Professional
Windows 2000
RedHat Linux
SuSE Linux
Novell Netware
Sun Solaris
Chapter 1: Introduction
7
Dimensions (H x W x D):
J610s, 13.1 x 44.7 x 56.1 cm (5.2 x 17.6 x 22.1 in)
J310s, 8.8 x 44.7 x 56.1 cm (3.5 x 17.6 x 22.1 in)
Net Weight:
J610s, 30.5 kg (67.2 lb) without drives, 38.5 kg (84.9 lb) with 16 drives, assuming
0.5 kg (1.1 lb) per drive.
J310s, 26.5 kg (58.4 lb) without drives, 32.5 kg (71.7 lb) with 12 drives, assuming
0.5 kg (1.1 lb) per drive.
Gross Weight (including carton):
J610s, 37.5 kg (82.7 lb) without drives.
J310s, 33.0 kg (72.8 lb) without drives.
Safety: CE, FCC Class A, VCCI, C-Tick, cUL, TUV, CB, BSMI, MIC.
Warranty and Support
Warranty: Three years complete system limited warranty.
Support: 24x7 email and phone support (English only). 24x7 access to Promise
support site for drivers, firmware, and compatibility.
CE Statement
Warning: This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
GOST-R Statement
ɉɪɟɞɭɩɪɟɠɞɟɧɢɟ. Ⱦɚɧɧɵɣ ɩɪɨɞɭɤɬ ɨɬɧɨɫɢɬɫɹ ɤ ɤɥɚɫɫɭ A. ȼ ɞɨɦɚɲɧɢɯ
ɭɫɥɨɜɢɹɯ ɨɧ ɦɨɠɟɬ ɛɵɬɶ ɩɪɢɱɢɧɨɣ ɜɨɡɧɢɤɧɨɜɟɧɢɹ ɪɚɞɢɨɩɨɦɟɯ, ɜ ɷɬɨɦ
ɫɥɭɱɚɟ ɩɨɥɶɡɨɜɚɬɟɥɸ, ɜɨɡɦɨɠɧɨ, ɩɨɬɪɟɛɭɟɬɫɹ ɩɪɢɧɹɬɶ ɫɨɨɬɜɟɬɫɬɜɭɸɳɢɟ
ɦɟɪɵ.
VTrak J610s, J310s Product Manual
8
IRAM Statement
MIC Statement
Advertencia: Este es un producto de clase A. En un ambiente doméstico, este
producto puede causar interferencia de las ondas de radio, en cuyo caso se
podría requerir que el usuario tome las medidas adecuadas.
9
Chapter 2: Installation
Unpacking the VTrak (below)
Mounting VTrak J610s in a Rack (page 11)
Mounting VTrak J310s in a Rack (page 13)
Installing Disk Drives (page 16)
Setting Up Data Cable Connections (page 20)
Setting Up Serial Cable Connections (page 27)
Connecting the Power (page 28)
Setting Up the CLI Connection (page 29)
Unpacking the VTrak
The VTrak J610s or J310s box contains the following items:
VTrak J610s or J310s Unit
•Quick Start Guide
Front bezel and key (J310s only)
RJ11-to-DB9 serial data cable
(Units with one I/O module: 1)
(Units with two I/O modules: 2)
1.0m (3.3 ft) SFF-8088 4X to 4X
external SAS cable
(Units with one I/O module: 1)
(Units with two I/O modules: 2)
Screws for disk drives
(J610s: 70, including 6 spares)
(J310s: 50, including 2 spares)
Left and right mounting rails
Left and right center-mount brackets
1.5m (4.9 ft) Power cords (2)
•CD with Product Manual and Quick
Start Guide
Warning
The electronic components within the VTrak are sensitive to
damage from Electro-Static Discharge (ESD). Observe
appropriate precautions at all times when handling the VTrak or its
subassemblies.
VTrak J610s, J310s Product Manual
10
Figure 1. VTrak J610s rear view
Figure 2. VTrak J310s rear view
Some VTraks ship with a single I/O module and a blank unit installed in the place
of the second I/O module. You can upgrade your VTrak by installing a second I/O
module. See page 53.
Some VTraks ship with a single power supply and an auxiliary cooling unit
installed in the place of the second power supply to provide a comparable level of
air circulation inside the enclosure.
115200
8 N 1
115200
8 N 1
Cooling Unit 1
Power Supply 1
Power Supply 2
Cooling Unit 2
I/O module 2I/O module 1
O
I
O
I
115200
8 N 1
115200
8 N 1
Cooling Unit 1
Power Supply 1
Power Supply 2
I/O module 2
Cooling Unit 2
I/O module 1
Chapter 2: Installation
11
Mounting VTrak J610s in a Rack
The J610s subsystem installs to the rack using the supplied mounting rails. You
can also use your existing rails.
Figure 3. VTrak J610s mounted in a rack with the supplied rails
To install the J610s subsystem into a rack with the supplied mounting rails:
1. Check the fit of the mounting rails in your rack system. See Figure 4.
2. Adjust the length of the mounting rails as needed.
3. Attach the mounting rail assemblies to the outside of the rack posts, using
the attaching screws from your rack system.
Be sure the support is on the bottom facing inward.
Cautions
At least two persons are required to safely lift, place, and
attach the VTrak subsystem into a rack system.
Do not lift or move the VTrak subsystem by the handles,
power supplies or the controller units. Hold the subsystem
itself.
Do not install the VTrak subsystem into a rack without rails to
support the subsystem.
Only a qualified electrician who is familiar with the installation
procedure should mount and install the VTrak subsystem.
Be sure all switches are OFF before installing the VTrak
subsystem or exchanging components.
Vertical Rack Post VTrak J610s
Mounting rails (included)
mount outside the rack post
Handles mount
outside the rack post
VTrak J610s, J310s Product Manual
12
4. Square the rail assemblies in the rack.
5. Tighten the adjustment screws and the attaching screws.
6. Place the VTrak subsystem onto the rails.
7. Secure the VTrak subsystem to the rack through each handle, using the
attaching screws from your rack system.
Figure 4. Rack mount assembly diagram
Inside of post
Rack front post
Rail attaching screw
(not included)
Rail adjustment screw
Flange
Rail attaching screw
(not included)
Inside of post
Rack back post
Front rail
Rail adjustment screw
Rear rail
Support
Chapter 2: Installation
13
Mounting VTrak J310s in a Rack
The J310s subsystem installs to the rack using the supplied mounting rails. You
can also use your existing rails.
Figure 5. VTrak J310s mounted in a rack with the supplied rails
To install the VTrak subsystem into a rack with the supplied mounting rails:
1. Check the fit of the mounting rails in your rack system. See Figure 7.
2. Slide the plates out of the mounting rails.
3. Attach one plate to each side of the VTrak subsystem.
Line-up the six holes in the plate with the corresponding holes in the
subsystem. Attach each plate with six screws (included). See Figure 6.
4. Slide one of the rails over the plate on one side of the enclosure.
Cautions
At least two persons are required to safely lift, place, and
attach the VTrak subsystem into a rack system.
Do not lift or move the VTrak subsystem by the handles,
power supplies or the controller units. Hold the subsystem
itself.
Do not install the VTrak subsystem into a rack without rails to
support the subsystem.
Only a qualified electrician who is familiar with the installation
procedure should mount and install the VTrak subsystem.
Be sure all switches are OFF before installing the VTrak
subsystem or exchanging components.
Vertical Rack Post
VTrak J310s
Mounting rails (included)
mount outside the rack post
Handles mount
outside the rack post
VTrak J610s, J310s Product Manual
14
The rail is designed to slide freely over the plate.
5. Attach a flange to each end of the rail, with the rail on the opposite side of
the flange from the two-hole bracket.
6. Install the rail adjustment screws (included) through the flange into the rail.
There are four screws for each flange. See Figure 7.
7. Place the subsystem with mounting rails into your rack system.
8. Attach the mounting rail assemblies to the outside of the rack posts, using
the attaching screws from your rack system.
9. Square the rail assemblies in the rack.
10. Tighten the adjustment screws and the attaching screws.
11. Place the VTrak subsystem onto the rails.
12. Secure the VTrak subsystem to the rack through each handle, using the
attaching screws from your rack system.
Figure 6. Sliding flange installation
Sliding plate
VTrak J310s
Screws (6 each side)
Rear (connector end)
of the subsystem
Chapter 2: Installation
15
Figure 7. Mounting rail installation
Inside of post
Rack front post
Rail attaching screw
(not included)
Rail adjustment screw
Mounting Rail
Rail attaching screw
(not included)
Inside of post
Rack back
Sliding plate
VTrak J610s, J310s Product Manual
16
Installing Disk Drives
Populate the VTrak with 3.5-inch SAS or SATA disk drives.
Install all of the drive carriers into the VTrak enclosure to ensure proper airflow,
even if you do not populate all the carriers with disk drives.
Figure 8. Drive carrier mounting holes
1. Remove the front bezel (J310s only).
2. Remove a disk drive carrier.
3. Optional. The AAMUX adapter is recommended for SATA disk drives used
with VTraks with two I/O modules, so that both modules can access a SATA
disk drive.
Place the optional AAMUX into the disk drive carrier and attach it with the
four screws.
Install only the screws supplied with the AAMUX.
The AAMUX fits into the carrier with the SAS connector at the back. See
Figure 10.
Snug each screw. Be careful not to over tighten.
4. Carefully lay the drive into the drive carrier at the front, so that the screw
holes on the bottom line up.
Caution
Use only the counter-sink screws supplied with the VTrak. Use of
other types of screws can damage the enclosure or the adjacent
drives.
WARNING:
Counter-sink screws only.
Disk Drive Mounting Holes
without AAMUX
Disk Drive Mounting Holes
with AAMUX
AAMUX
Mounting Holes
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62

Promise Technology J310s User manual

Category
NAS & storage servers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI