3M Through-Board Socket, 956 Series User guide

Brand: 3M

Model: Through-Board Socket, 956 Series

Type: User guide

This manual is also suitable for

™

Board-to-Board Connectors

and Box Headers, 2 mm

New 3M

™

Board-to-Board Connectors and Box Headers

95X Series Provides a Robust System Solution for 2 mm

Applications

3M now offers the 95X Series of 2 mm board-to-board connectors and 2 mm

(shrouded) box headers for board-to-board and wire-to-board interconnect solutions.

The 3M Board-to-Board Connectors and Box Headers, 95X Series, cover most

typical needs for connecting in horizontal, vertical and right angle orientations,

and they provide a wide range of distances between boards when used in stacking

applications. These new 95X Series products signiﬁ cantly expand the range of 2 mm

board-to-board and wire-to-board interconnect solutions offered by 3M.

The Board-to-Board and Box Header Connectors 95X Series are ideal for usage in

high volume applications, with less stringent requirements for the number of mating

cycles. At 10µ” (microinch) gold, the product range is qualiﬁ ed in accordance with

European requirements for IEC performance class 3.

The Board-to-Board 95X Series product family features 17 new product categories

that include pin strips and boardmount sockets, both available in 1-row and 2-row

surface mount and through-hole versions. Pin counts for these products range from 2

- 80 positions, depending on the type of product.

The connector bodies are made from high temperature thermoplastic material,

allowing for high temperature processing in lead-free environments up to 260ºC

(JEDEC J-STD-020C).

This product family is EU RoHS compliant and marked in accordance with and

Chinese RoHS marking standard SJ/T 11364-2006.

™

Pin Strip Header, 951 Series, Right Angle

™

Box Header, 957 Series

™

Pin Strip Header, 951 Series, Dual Insulator,

Straight, Surface Mount

™

Boardmount Socket, 950 Series, Side Entry

Important Notice

Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.

Warranty; Limited Remedy; Limited Liability.

3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive

remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be

liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

*”RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values

in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. This

information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.

In the event any product is proven to not conform with 3M’s Regulatory Information Sheet, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance

with the Warranty stated on this sheet.

The product, except product with tin or tin-lead plated solder tails, will conform to 3M published speciﬁcations (or to unique product speciﬁcations, if any) and be free

from defects in material and manufacture for a period of twelve (12) months after the date of manufacture by 3M. Product with tin or tin-lead plated solder tails is

warranted for ninety (90) days after the date of manufacture.

3M Electronics

Interconnect Products

6801 River Place Blvd.

Austin, TX 78726-9000

U.S.A.

1-800-225-5373

www.3m.com/interconnects

Please recycle. Printed in USA.

80-4000-1958-6

Tech Sheet Title

TS-0523 3M™ IDC Wiremount Sockets, 1522 Series (Mates with 957 Series Box Header)

TS-2150 3M™ Molded Assemblies, 2M Series (Mates with 957 Series Box Header)

TS-2155 3M™ Boardmount Socket, 2 mm and 2 mm x 2 mm Straight, Solder Tail, 950 Series

TS-2156 3M™ Pin Strip Header, 2 mm and 2 mm x 2 mm Straight & Right Angle, Solder Tail, 951 Series

TS-2157 3M™ Pin Strip Header, 2 mm and 2 mm x 2 mm Straight, Surface Mount, 951 Series

TS-2158 3M™ Pin Strip Header, 2 mm and 2 mm x 2 mm Right Angle, Surface Mount, 951 Series

TS-2159 3M™ Pin Strip Header, 2 mm x 2 mm Dual Insulator, Straight, Surface Mount, 951 Series

TS-2160 3M™ Pin Strip Header, 2 mm and 2 mm x 2 mm Dual Insulator, Straight, Solder Tail, 951 Series

TS-2161 3M™ Shunt, 2 mm, 959 Series

TS-2162 3M™ Through-Board Socket, 2 mm x 2 mm Straight, Dual Entry, Solder Tail, 953 Series

TS-2163 3M™ Boardmount Socket, 2 mm x 2 mm, Side Entry, Solder Tail, 950 Series

TS-2164 3M™ Boardmount Socket, 2 mm and 2 mm x 2 mm Right Angle, Solder Tail, 950 Series

TS-2165 3M™ Through-Board Socket, 2 mm x 2 mm Straight, Dual Entry, Surface Mount, 953 Series

TS-2166 3M™ Through-Board Socket, 2 mm Single Row, Straight, Dual Entry, Surface Mount, 953 Series

TS-2167 3M™ Boardmount Socket, 2 mm x 2 mm Right Angle, Surface Mount, 950 Series

TS-2168 3M™ Through-Board Socket, 2 mm x 2 mm Straight, Dual or Bottom Entry, Surface Mount, 956 Series

TS-2174 3M™ Box Header, 2 mm x 2 mm, Solder Tail, 957 Series

TS-2175 3M™ Box Header, 2 mm x 2 mm Surface Mount, 957 Series

3M™ Through-Board Socket, 953 Series

Speciﬁcation details for the products associated with this release can be found in the technical data sheets listed below.

3M Through-Board Socket, 956 Series User guide

Brand: 3M

Model: Through-Board Socket, 956 Series

Type: User guide

This manual is also suitable for

Download PDF

report

3M Through-Board Socket, 956 Series User guide

This manual is also suitable for

3M Through-Board Socket, 956 Series User guide

Related papers

Other documents