Springdale Lighting STT13011 Operating instructions

ASSEMBLY INSTRUCTIONS:

Item No: STT13011

1. Pull cord through base to tighten column connections.

Place the base（A) on a level surface.

2. Screw the threaded pipe (C) into the socket assembly (B).

3. Place the shade (D) over the threaded rod (C) and tighten

with the finial (E) securing the shade (D) in place.

4. Install light bulbs into bulb sockets.

Uses (2) maximum 60 Watt Type “A” Bulbs or

(2) maximum 13Watt CFL Bulbs (Bulbs not included).

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth. Do not use abrasives.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision -01/21/13

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Page is loading ...