Dale Tiffany TT12325 Installation guide

ASSEMBLY INSTRUCTIONS:

Item No: TT12325

1. Pull cord through base (A) to tighten column connections.

Place the base on a level surface.

Screw the threaded rod (D) into the lamp holder (C).

2. Adjust the knurl nut (E) on the threaded rod (D).

This can be used to raise the shade if necessary.

3. Place the shade (F) and diffuser (G), over the threaded rod

and tighten with the finial (H) securing the shade in place.

4. Install bulbs (B) into the bulb sockets.

Uses (2) maximum 60 Watt Type “A” Bulbs or

(2) maximum 13Watt CFL Bulbs (Bulbs not included).

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth. Do not use abrasives.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision -12/18/12

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Page is loading ...

Download PDF