BENDIX 01-L-1 User manual

BENDIX
Brand
BENDIX
Model
01-L-1
Type
User manual

BENDIX 01-L-1 is an engine driven, single-cylinder, reciprocating compressor with a displacement of 9-1/2 cu. ft. per min at 1250 RPM.

It is available in an engine lubricated configuration and employs a water cooled cylinder head and air cooled inte-gral block and crankcase. It is available in belt drive, direct drive single flange and direct drive double flange mount confi gurations.

BENDIX 01-L-1 is an engine driven, single-cylinder, reciprocating compressor with a displacement of 9-1/2 cu. ft. per min at 1250 RPM.

It is available in an engine lubricated configuration and employs a water cooled cylinder head and air cooled inte-gral block and crankcase. It is available in belt drive, direct drive single flange and direct drive double flange mount confi gurations.

© 2004 Bendix Commercial Vehicle Systems LLC Printed in U.S.A. All rights reserved.
*Inlet & discharge located on the right side of the compressor.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

BENDIX 01-L-1 User manual

BENDIX
Brand
BENDIX
Model
01-L-1
Type
User manual

BENDIX 01-L-1 is an engine driven, single-cylinder, reciprocating compressor with a displacement of 9-1/2 cu. ft. per min at 1250 RPM.

It is available in an engine lubricated configuration and employs a water cooled cylinder head and air cooled inte-gral block and crankcase. It is available in belt drive, direct drive single flange and direct drive double flange mount confi gurations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents