BENDIX TCH-001-015 User manual

Technical Bulletin

Bulletin No: PRO-01-15 Effective Date: 1/10/80 Cancels: NA Page: 1 of 1

Subject:

TU-FLO 700 COMPRESSOR 292503 CONNECTING ROD BOLT

The Tu-Flo 700 compressor connecting rod cap screw is a pointed special cap screw used to provide adequate

crankcase clearance.

Removal or installation of the screw requires a special socket that is available with either 1/4” or 3/8” drives.

Socket part numbers are as follows:

1/4” square drive – Part TX-1E10

3/8” square drive – Part TX-3E10

We understand that these sockets are available from “Snap-On” Tools or, if unavailable from this source, contact:

The Apex Machine & Tool Company

1025 S. Patterson Boulevard

P. O. Box 952

Dayton, Ohio 45401

Phone: (a/c 513) 222-7871