ClearOne VIEW Lite CJ100 Controller Quick start guide

ClearOne
Brand
ClearOne
Model
VIEW Lite CJ100 Controller
Type
Quick start guide

This manual is also suitable for

ClearOne VIEW Lite CJ100 Controller is a device used to control encoders and decoders in a VIEW Lite streaming system. It enables integration with third-party controllers and offers flexible LAN control options through a web GUI and Telnet. The controller automatically discovers VIEW Lite encoders and decoders on the network, acting as an interface between them and third-party control systems. It can be connected to these systems via IP or RS232 connection.

ClearOne VIEW Lite CJ100 Controller is a device used to control encoders and decoders in a VIEW Lite streaming system. It enables integration with third-party controllers and offers flexible LAN control options through a web GUI and Telnet. The controller automatically discovers VIEW Lite encoders and decoders on the network, acting as an interface between them and third-party control systems. It can be connected to these systems via IP or RS232 connection.

VIEW
®
Lite CJ100 Controller
Controller for JPEG2000 based VIEW Lite Encoders & Decoders
Quick-Start Guide
VIEW_Lite_CJ100_QSG.indd 1 8/15/2018 10:53:47 AM
PRODUCT OVERVIEW .................................................................. 1
VIEW
®
LItE AV oVEr IP StrEAmIng SyStEm ........................................ 1
DEVIcE APPLIcAtIon ............................................................................ 1
CONTROLLER IN A NETWORK .................................................... 2
PARTS INCLUDED ......................................................................... 3
CONNECTING THE CJ100 CONTROLLER ................................... 4
COMPLIANCE ................................................................................ 5
PART NUMBERS ............................................................................ 5
Table of Contents
VIEW_Lite_CJ100_QSG.indd 2 8/15/2018 10:53:47 AM
QUICK-START GUIDE
1
PRODUCT OVERVIEW
VIEW
®
LItE AV oVEr IP StrEAmIng SyStEm
The VIEW Lite platform is designed to stream high-quality audio and
video over a TCP/IP network (AVoIP™). An encoder, such as a VIEW Lite
EJ100, takes digital video and audio from a source device, such as a
receiver, cable box or DVR, and makes the source available anywhere on
the dedicated Ethernet LAN network. A decoder, such as the VIEW Lite
DJ100, takes the combined video and audio stream and decodes it. The
DJ100 then sends the video and audio to a display such as a HDTV or
projector and sound system.
DEVIcE APPLIcAtIon
The CJ100 is a controller for VIEW Lite encoders and decoders. The
CJ100 offers integration-friendly and flexible LAN control (Web GUI &
Telnet) features. It can also be used with 3rd-party controllers.
VIEW_Lite_CJ100_QSG.indd 1 8/15/2018 10:53:47 AM
VIEW LITE CJ100 CONTROLLER
2
+
POE
Encoder
Encoder
Encoder
Encoder
Third Party Controller
Decoder
HDMI IN
Apple TV
STB
4K Media Player
Workstation/PC
HDMI IN
HDMI IN
HDMI IN
AUDIO IN
Decoder
HDMI OUT
HDMI OUT HDMI OUT
Remote
Display
Display
7.1 Surround Sound System
Remote
Decoder
Remote
Display
HDMI OUT
KVM
HDMI OUT
USB (Keyboard and Mouse)
CJ100 Controller
PC used for Configuration
iPad with VIEW Lite
Application
Wireless Router
CONTROLLER IN A NETWORK
The VIEW Lite CJ100 controller discovers VIEW Lite encoders and
decoders automatically. The CJ100 controller acts as an interface
between 3rd-party controllers and VIEW Lite encoders and decoders.
It can also be connected to 3rd-party control systems through an IP or
RS232 connection.
VIEW_Lite_CJ100_QSG.indd 2 8/15/2018 10:53:53 AM
QUICK-START GUIDE
3
PARTS INCLUDED
The following items are included with the VIEW Lite CJ100 Controller:
• 1X VIEW Lite CJ100 Controller Unit
• 1X 12V DC Power Adapter
• 1X Detachable Plug
• 1X Phoenix Euroblock (Male, 3.5 mm, 6 pins)
• 2X Mounting Ears with Screws
Verify that all items have been received. If there is any issue, please
contact your ClearOne representative.
Mounting ears shown separately Mounting ears attached to the unit
VIEW_Lite_CJ100_QSG.indd 3 8/15/2018 10:54:13 AM
VIEW LITE CJ100 CONTROLLER
4
A. LED
» Status:
• Off (no light): Unit powered off, or in the boot process.
• Blue: Unit is working properly.
» Power: Solid red indicates the unit is powered on.
B. Reset Button: Press and hold for 5+ seconds for factory reset.
NOTE: All custom data is lost when default settings are restored.
VIEW Lite CJ100 Rear Panel
CONNECTING THE CJ100 CONTROLLER
VIEW Lite CJ100 Front Panel
Power LED
Indicator
Status LED
Indicator
Reset
Button
LAN1 and LAN2 Network
Ports
RS232
12V DC Input
VIEW_Lite_CJ100_QSG.indd 4 8/15/2018 10:54:16 AM
QUICK-START GUIDE
5
A. Ethernet/PoE Ports:
» LAN1: RJ-45 10/100/1000Mbps Ethernet port that connects
to PoE Ethernet Network Switches for communication with
encoders and decoders.
» LAN2: RJ-45 Ethernet port without PoE for 3rd-party
controller controlling, configuring and managing system.
• Left/Green LED: Indicates a good network connection.
• Right/Amber LED: Blinks to indicate network activity.
B. RS-232 Ports: Port for debugging and display/3rd-party device
serial command control.
C. 12V DC Input: Power provided by the power supply.
COMPLIANCE
Details on compliance can be found on the ClearOne website under “Resource
Library”.
PART NUMBERS
910-0100-003 VIEW Lite Controller CJ100
910-0100-001 VIEW Lite Encoder EJ100
910-0100-002 VIEW Lite Decoder DJ100
VIEW_Lite_CJ100_QSG.indd 5 8/15/2018 10:54:16 AM
VIEW LITE CJ100 CONTROLLER
6
CONTACT INFORMATION
HEADQUARTERS:
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
Sales:
Tel: 801.975.7200
e-mail: [email protected]
US & Canada:
Tel: 801.975.7200
TollFree: 800.945.7730
Fax: 801.303.5711
TechSales
Tel: 801.974.3760
e-mail: [email protected]
International:
Tel: +1.801.975.7200
e-mail: [email protected]
TechSupport
Tel: 801.974.3760
e-mail: [email protected]
© 2018 ClearOne, Inc. All rights reserved.
Information in this document is subject to change without notice. QSG-0060-001 Revision 1.0 JULY 2018
VIEW_Lite_CJ100_QSG.indd 6 8/15/2018 10:54:16 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

ClearOne VIEW Lite CJ100 Controller Quick start guide

ClearOne
Brand
ClearOne
Model
VIEW Lite CJ100 Controller
Type
Quick start guide
This manual is also suitable for

ClearOne VIEW Lite CJ100 Controller is a device used to control encoders and decoders in a VIEW Lite streaming system. It enables integration with third-party controllers and offers flexible LAN control options through a web GUI and Telnet. The controller automatically discovers VIEW Lite encoders and decoders on the network, acting as an interface between them and third-party control systems. It can be connected to these systems via IP or RS232 connection.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents