3M Detection Solutions DL DPR Operating instructions

Brand: 3M

Model: Detection Solutions DL DPR

Type: Operating instructions

3M Detection Solutions DL DPR is a personal air sampling pump designed to be used in confined spaces or remote locations to monitor contaminants. It is a versatile pump that can be used to collect samples in a variety of applications, including industrial hygiene, environmental monitoring, and occupational health surveys. The DL DPR pump has a rugged design and is easy to use, making it an ideal choice for professional and non-professional users. It can be used to collect samples for analysis of gases, vapors, and particulates.

VI-400

Pro

HAND-ARM

VIBRATION MONITORING

Quick Start Setup Guide

Step

Gather Re

VI-400

Hand-

Hose

USB C

IBM-c

Quest

* You will

VI-400Pro Hand-Arm Vibration Monitoring 3

Step 1.

Gather Required Equipment

VI-400Pro Advanced Vibration Analyzer

Hand-Arm Accelerometer with Cable

Hose Clamp and Mounting Block

USB Computer Interface Cable

IBM-compatible PC with USB Port

QuestSuite

Professional II (QSP II) Application Software CD

* You will need to acquire Mounting Disk, Stud & Adhesive (not supplied)

C F

4 Quest Technologies

Step 2.

Install QSP II Application Software

(Refer to QSP II Software Installation Instructions provided with software CD)

Step 3.

Turn on VI-400Pro using the Proceed/Pause and Start/Stop button simultaneously

Step 4.

Connect USB Computer Interface Cable between VI-400Pro and PC

Step

Launch Q

Click

Profe

Step

Add VI-40

Selec

ltaneously

Step 5.

Launch QSP II Application Software

Click on Start>Programs>Quest Technologies>QuestSuite

Professional II>QuestSuite Professional II.

Step 6.

Add VI-400Pro to QSP II My Instruments Database

Select the Vibration Icon

Select the VI-400Pro Icon

VI-400Pro Hand-Arm Vibration Monitoring 5

Step 6. (continued)

Select Add Button

Enter Name/Description

Enter Serial Number

Click Add Button

Close Add Instrument Window

6 Quest Technologies

Step

Setup VI-

Click

VI-40

Click

Step 7.

Setup VI-400Pro for Hand-Arm Vibration Monitoring

Click on instrument to be programmed in list of

VI-400Pro Device Names/Serial Numbers

Click on Setup icon

VI-400Pro Hand-Arm Vibration Monitoring 7

Step 7. (continued)

Click on either Hand-Arm (broadband measurements only) or Hand-Arm

Advanced (broadband and 1/3 Octave Real Time Frequency Analysis) from

list of Saved Setups

Click Send Setup to Instrument icon

Close VI-400Pro Setup window

8 Quest Technologies

Step

Disco

Conn

d-Arm

is) from

Step 7. (continued)

Disconnect USB cable from VI-400Pro

Connect Hand-Arm Accelerometer to VI-400Pro

VI-400Pro Hand-Arm Vibration Monitoring 9

Step 8.

Attach Hand-Arm Accelerometer to Tool to be Monitored

Step 9.

Place VI-400Pro in Run Mode to Recording Data by pressing the Start/Stop button

10 Quest Technologies

Step

Have Wor

Collect D

Step

Stop Reco

pressing t

p button

Step 10.

Have Worker Operate Tool

Collect Data While Tool is in Use

Step 11.

Stop Recording at End of Desired Monitoring Period by

pressing the Start/Stop button

VI-400Pro Hand-Arm Vibration Monitoring 11

Step 12.

Disconnect Hand-Arm Accelerometer

Step 13.

Connect USB Computer Interface Cable between VI-400Pro and PC

12 Quest Technologies

Step

Downloa

Selec

VI-40

Click

Step 14.

Download Recorded Data from VI-400Pro to QSP II

Select instrument to be uploaded from list of

VI-400Pro Device Names/Serial Numbers

Click Retrieve Data icon

VI-400Pro Hand-Arm Vibration Monitoring 13

Step 14. (continued)

Click Select All icon

Click Download icon

14 Quest Technologies

Step

Disco

Step

View, Cha

Refer to H

chart and

Step 14. (continued)

Close Retrieve Data window

Disconnect USB cable from VI-400Pro

Step 15.

View, Chart and Print Reports of Measurement Data

Refer to Help files in QSP II for instructions on how to view,

chart and print reports of downloaded data

VI-400Pro Hand-Arm Vibration Monitoring 15

WORLDWIDE HEADQUARTERS

1060 Corporate Center Drive

Oconomowoc, WI 53066 USA

262-567-9157 • 800-245-0779 • Fax 262-567-4047

www.Quest-Technologies.com

98-590

Rev. A

5/06

ISO 9001:2000 Registered Company

ISO 17025 Accredited Calibration Lab

About us…

Quest Technologies is a design, manufacturing and

marketing company with distribution in over 50 countries

worldwide. Quest has built a strong reputation for rugged

and reliable instrumentation and software systems that

monitor and evaluate occupational and environmental

health & safety hazards including noise, vibration, heat

stress, indoor air quality and toxic/combustible gases.

Quest monitoring instruments serve a variety of

occupations and industries with clients in mining,

research, enforcement, military, education, insurance

and manufacturing business sectors.

3M Detection Solutions DL DPR Operating instructions

3M Detection Solutions DL DPR Operating instructions

3M Detection Solutions DL DPR Operating instructions

Related papers

Other documents