2. 3M
  3. Detection Solutions DL DPR

3M Detection Solutions DL DPR Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the 3M Detection Solutions DL DPR Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
VI-400
Pro
HAND-ARM
VIBRATION MONITORING
Quick Start Setup Guide
Step
Gather Re
q
VI-400
P
Hand-
A
Hose
C
USB C
o
IBM-c
o
Quest
S
* You will
n
F
E
D
C
B
A
VI-400Pro Hand-Arm Vibration Monitoring 3
Step 1.
Gather Required Equipment
VI-400Pro Advanced Vibration Analyzer
Hand-Arm Accelerometer with Cable
Hose Clamp and Mounting Block
USB Computer Interface Cable
IBM-compatible PC with USB Port
QuestSuite
®
Professional II (QSP II) Application Software CD
* You will need to acquire Mounting Disk, Stud & Adhesive (not supplied)
F
E
D
C
B
A
A
B
D
E
C F
4 Quest Technologies
Step 2.
Install QSP II Application Software
(Refer to QSP II Software Installation Instructions provided with software CD)
Step 3.
Turn on VI-400Pro using the Proceed/Pause and Start/Stop button simultaneously
Step 4.
Connect USB Computer Interface Cable between VI-400Pro and PC
Step
Launch Q
S
Click
o
Profe
s
Step
Add VI-40
Selec
t
Selec
t
B
A
A
A
A
C
D)
ltaneously
Step 5.
Launch QSP II Application Software
Click on Start>Programs>Quest Technologies>QuestSuite
Professional II>QuestSuite Professional II.
Step 6.
Add VI-400Pro to QSP II My Instruments Database
Select the Vibration Icon
Select the VI-400Pro Icon
B
A
A
VI-400Pro Hand-Arm Vibration Monitoring 5
A
A
B
Step 6. (continued)
Select Add Button
Enter Name/Description
Enter Serial Number
Click Add Button
Close Add Instrument Window
G
F
E
D
C
C
D
F
G
E
6 Quest Technologies
Step
Setup VI-
4
Click
o
VI-40
0
Click
o
B
A
Step 7.
Setup VI-400Pro for Hand-Arm Vibration Monitoring
Click on instrument to be programmed in list of
VI-400Pro Device Names/Serial Numbers
Click on Setup icon
B
A
VI-400Pro Hand-Arm Vibration Monitoring 7
A
B
Step 7. (continued)
Click on either Hand-Arm (broadband measurements only) or Hand-Arm
Advanced (broadband and 1/3 Octave Real Time Frequency Analysis) from
list of Saved Setups
Click Send Setup to Instrument icon
Close VI-400Pro Setup window
E
D
C
8 Quest Technologies
C
D
E
Step
Disco
n
Conn
e
G
F
d-Arm
s
is) from
C
E
Step 7. (continued)
Disconnect USB cable from VI-400Pro
Connect Hand-Arm Accelerometer to VI-400Pro
G
F
VI-400Pro Hand-Arm Vibration Monitoring 9
F
G
Step 8.
Attach Hand-Arm Accelerometer to Tool to be Monitored
Step 9.
Place VI-400Pro in Run Mode to Recording Data by pressing the Start/Stop button
10 Quest Technologies
Step
Have Wor
k
Collect D
a
Step
Stop Reco
pressing t
h
o
p button
Step 10.
Have Worker Operate Tool
Collect Data While Tool is in Use
Step 11.
Stop Recording at End of Desired Monitoring Period by
pressing the Start/Stop button
VI-400Pro Hand-Arm Vibration Monitoring 11
Step 12.
Disconnect Hand-Arm Accelerometer
Step 13.
Connect USB Computer Interface Cable between VI-400Pro and PC
12 Quest Technologies
Step
Downloa
d
Selec
t
VI-40
0
Click
B
A
Step 14.
Download Recorded Data from VI-400Pro to QSP II
Select instrument to be uploaded from list of
VI-400Pro Device Names/Serial Numbers
Click Retrieve Data icon
B
A
VI-400Pro Hand-Arm Vibration Monitoring 13
A
B
Step 14. (continued)
Click Select All icon
Click Download icon
D
C
14 Quest Technologies
C
D
Step
Close
Disco
n
Step
View, Cha
r
Refer to H
chart and
F
E
Step 14. (continued)
Close Retrieve Data window
Disconnect USB cable from VI-400Pro
Step 15.
View, Chart and Print Reports of Measurement Data
Refer to Help files in QSP II for instructions on how to view,
chart and print reports of downloaded data
F
E
VI-400Pro Hand-Arm Vibration Monitoring 15
E
F
WORLDWIDE HEADQUARTERS
1060 Corporate Center Drive
Oconomowoc, WI 53066 USA
262-567-9157 • 800-245-0779 • Fax 262-567-4047
www.Quest-Technologies.com
98-590
Rev. A
5/06
ISO 9001:2000 Registered Company
ISO 17025 Accredited Calibration Lab
About us…
Quest Technologies is a design, manufacturing and
marketing company with distribution in over 50 countries
worldwide. Quest has built a strong reputation for rugged
and reliable instrumentation and software systems that
monitor and evaluate occupational and environmental
health & safety hazards including noise, vibration, heat
stress, indoor air quality and toxic/combustible gases.
Quest monitoring instruments serve a variety of
occupations and industries with clients in mining,
research, enforcement, military, education, insurance
and manufacturing business sectors.
/