Rosewill PRISM M ATX Mid Tower User manual

  • Hello! I am an AI chatbot trained to assist you with the Rosewill PRISM M ATX Mid Tower User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
PRODUCT OVERVIEW
Disassembly Chart (components vary by country)
Thank you for purchasing a Rosewill Case.
Please read the instruction manual before use and retain for future reference.
PRISM M
Dimensions: 208 x 455 x 390 mm (W x H x D)
455 mm
208 mm390 mm
Panel L
Panel R
Front Panel
SSD
Cage
HDD
Cage
120 mm RGB
Double Ring Fan
120 mm Black Fan
Top Dust Filter
2
Accessory Kit
x1 x5
Speaker Cable Tie
Motherboard Cable
Management
x1
Nut Setter
Standoff
Installation
x8
Screw-C
(6-32 x 8 mm)
3.5" HDD
x6
Screw-A
(6-32 x 6 mm)
x17
Screw-B
(M3 x 5 mm)
6+3
Standoff
Motherboard
(6 pre-Installed)
INSTALLATION GUIDE
1. Open the Unit
1-1. Pull to open Panel R. Remove the thumb screws and take off Panel L (Figure 1).
Motherboard
2.5" HDD/SSD
PSU
Add-on Card
1
3
2. Install Power Supply
2-1. Set the power supply unit (PSU) at the bottom-rear of the case and secure with Screw-A
(Figure 2).
3. Install Motherboard
3-1. Secure the motherboard onto the pre-installed standoffs with Screw-B (Figure 3).
2
3
4
4. Install Add-on Card
4-1. Bend to remove the slot covers, then install the add-on card and secure with Screw-A
(Figure 4).
5. Install 3.5”/2.5” HDD/SSD
5-1. Remove the thumb screws on the bottom of chassis to take out the HDD cage (Figure 5a).
4
5a
5
5-2. Install HDD/SSD onto the trays and secure with Screw-B or C (Figure 5b). Insert the trays
back into drive cage and secure with thumb screws (Figure 5c).
5-3. Alternatively, you can also install 2.5” SSD on the right side of chassis (Figure 5d).
OR
6. Care
To prevent damage, keep all panels closed and secured.
6-1. Put the side panels back in place and secure with thumb screws.
6-2. Clean the dust lters on top/bottom regularly to ensure adequate airow.
5b
5c
5d
6
7. Options
7-1. Additional Fan Installation
The PRISM M features ample space for additional cooling fans. Please refer to the
Specications Table for options.
7-2. LED Light Mode
Press the LED light button briey to select desired mode:
Rainbow Red Green Blue Purple Cyan Lime White RGB-1 (seven-
color-breathing) RGB-2 (seven-color-blinking) Off
7-1. Liquid Cooling Radiator Installation
The PRISM M supports the option of installing a 240 mm radiator in the front (Figure 7a)
and a 240 mm radiator on the top (Figure 7b) to more effectively cool high-performance
systems.
7a
7b
7
USB 3.0 CONNECTOR USB 2.0 CONNECTOR HD Audio CONNECTOR
TOP I/O CABLE PINOUT
TOP I/O
Power Reset Audio Out
LED Mode Audio In
USB 3.0 USB 2.0
Technical Support Information [email protected] 1-800-575-9885
Please register your product at www.rosewill.com for complete warranty information and support for your product.
PRISM M_B
Model
Model Name PRISM M
Specifications
Type Mid Tower
Color Black
Case Material Steel/Plastic/Tempered Glass
With Power Supply
No
Power Supply Mounted Bottom
Motherboard Compatibility E-ATX, ATX, Micro ATX
With Side Panel Window Yes/Tempered Glass Side Window
Expansion
Internal 3.5" Drive Bays 2/1
Internal 2.5" Drive Bays 2/3
Expansion Slots 7
I/O
Top Ports
2 x USB 3.0
2 x USB 2.0
Audio In/Out
LED Modes
Cooling System
120 mm Fans
3 x Front (1 x Black Fan pre-installed)
2 x Top (optional)
1 x Rear (1 x RGB Double Ring Fan pre-installed)
140 mm Fans
2 x Front (optional)
2 x Top (optional)
1 x Rear (optional)
Physical Specifications
Dimensions 8.19 x 17.91 x 15.35 in (W x H x D)
Weight 12.13 lbs
SPECIFICATIONS TABLE
/