Step 1.1
1. Connect the aerial cable to RF IN. 2.Connect the
HDMI cable between the HDMI connector on your
digital recorder and the HDMI on your TV. 3. Connect
the output from the power supply to the DC IN
connector on your digital box.
Step 1.2
Connect the mains adaptor to a mains power outlet
socket and turn on the power socket. Next connect the
power jack connector to the DC IN connector on the
rear panel of the digital box.
Step 1.3
Remove the battery cover from the remote control and
insert 2 x AAA batteries (supplied) into the battery
compartment. Replace the battery cover.
Setting Up
1
Step 2.1
If ‘Easy’ is not already selected, press the t button
on your remote control to select it.
Step 2.2
Press the OK button to start the installation. It will take
about 8 minutes for your digital box to find all the channels.
Step 2.3
Press the OK button when scanning has finished. The
screen displays ‘Installation complete’. Press the OK
button again to begin watching TV.
Step 2.4
The channel at the top of the channel list will be shown
on your TV. The information banner along the bottom
will be shown on screen for a short time.
First Time Install
2
Getting started
3
Getting around the Guide Now and Next information
To see what’s coming on next press the i-Button on
your remote control to show programme name and
broadcast times for the current and next programmes.
Press the i-Button a second time to view more
information including a synopsis of the programme.
programmes on other channels (rows). Press the
i-Button again to remove these programme details.
The Main Menu
BBC iPlayer
To open the Guide, press the GUIDE Button.
Press the p and q buttons to select a new channel,
and the u Buttons to select the programme and press
the OK Button to watch the selected programme.
To close the GUIDE window press the GUIDE Button
again or press the BACK Button.
To open the Main Menu, press the MENU button.
Press the p and q Buttons to select an option.
From this menu you can organise your channels, retune
your digital box, change the default settings, connect
to BBC iPlayer, or look at the system information.
To run the BBC iPlayer application, the digital recorder
must be connected as shown in Fig 1.4. The router
must be connected to the internet.
Press the p and q Buttons to select BBC iPlayer and
press OK to display the BBC iPlayer home page. Use
the p ,q, p and q Buttons to navigate the page.