Check coverage in your area.
Text your postcode, followed by your house number or name to 83331*.
Or visit www.freeview.co.uk
*e.g. NW9 6NY (Costs no more than a normal text.)
The FREEVIEW service is subject to coverage. An aerial upgrade may be required.
The FREEVIEW, FREEVIEW+, FREEVIEW+ HD words and logos are trade marks of DTV Services LTD.
DTV Services Ltd 2002, 2008.
Your remote control
FAV
ON LI NE
SWAP: Switches between
previous and currently
watched TV channels
0 – 9: Numerical keys
AD: Set Audio Description on/off
AUD: Select audio
language (if available)
BACK: Return to previous menu
CH LIST:(Channel List): Display
the list of stored channels
P+, P- (Change Channel):
Changes your TV channels
RED, GREEN, YELLOW, BLUE
Coloured Buttons: quick keys
EXIT: Exit the menu and
return to live TV
FAST FWD: (1) Fast
Forward at variable speeds
(2) Step through menu bars
GUIDE: Display the TV
programme guide
i (Information):
Displays information about
programmes and recordings
LIBRARY: Displays a library of
previously recorded programming
MENU: Display the Main Menu
MUTE: Turns your TV
sound on/off
Navigation:
Navigate up/down/left/right
in menus/on screen displays
OK: Press to confirm
current selection
ONLINE: Display the online menu
PLAY/PAUSE: Toggle action for
recordings and Live Pause TV
R (RECORD):
(1) Record a programme
(2) Set a future recording
REWIND:
(1) Fast Rewind at variable speeds
(2) Step through menu bars
STOP:
Stops recording or live paused TV
SUB: Set subtitles on/off
VOLUME (V+ V-):
Changes your TV volume
TEXT: Load text services
available on some channels
FAV:(Favourites List):
Displays the list of your
favourite channels
POWER: Switches the main
unit to standby
HOME: Press
to return to BBC1 at any time
Quick Start Guide
Welcome to your new FREEVIEW digital recorder
This guide will help you get started, and make most of the
features on offer
GV101YRH Series
Digital recorder
Step 1.1
1. Connect the aerial cable to RF IN. 2.Connect the
HDMI cable between the HDMI connector on your
digital recorder and the HDMI on your TV. 3. Connect
the output from the power supply to the DC IN
connector on your digital box.
Step 1.2
Connect the mains power supply plug to a mains
power outlet socket and turn on the power socket.
Next connect the power jack commector to the DC IN
on the rear panel of the digital box.
Step 1.3
Remove the battery cover from the remote control and
insert 2 x AAA batteries (supplied) into the battery
compartment. Replace the battery cover.
Setting Up
1
Step 2.1
Select your TV screen type using the u and t
Buttons to move between the options: LETTERBOX 4:3,
PAN and SCAN 4:3, WIDESCREEN 4:3 and WIDESCREEN
16:9.
Step 2.2
Press the OK button to start the installation.
Step 2.3
Press the GREEN Button when installation has finished.
You will see the channels that have been found during
the installation. It will take about 8 minutes for your
digital box to find all the channels.
Step 2.4
When installation has successfully completed, the
channel at the top of the channel list will be shown
on your TV. The information banner will be shown on
screen for a short time.
First Time Install
2
Getting started
3
Getting around the Guide Now and Next information
To see what’s coming on next press the i-Button on
your remote control.
The display shows programme name and broadcast
times for the current and next programmes. You can
step along the row to reach more programmes using
the u and t Buttons. To remove this information from
the display, press the EXIT Button.
The Main Menu
Now and Next - Extended
To open the Guide, press the GUIDE Button.
Press the p and q buttons to select a new channel,
and the u Buttons to select the programme and press
the OK Button to watch the selected programme.
To close the GUIDE window press the GUIDE Button
again or press the BACK Button.
To open the Main Menu, press the MENU button.
Press the p and q Buttons to select an option.
From this menu you can organise your channels, retune
your digital box, change the default settings, or look at
the system information.
Press the i-Button a second time to view more
information including a synopsis of the programme.
You can view similar details about other progammes
on the ‘programme row’ by pressing the u and
t Buttons. Press the p and q Buttons to view
programmes on other channels (rows).
CLIP
BATTERIES
TYPE AAA
BATTERY
COMPARTMENT
BATTERY
COMPARTMENT
LID
1
3
2
FAV
ONLIN E
Fitting batteries to remote control
Connecting up Turning on
First time installation
Viewing installed channels
Auto view of first channel
Starting installation
-
1
-
2
Goodmans GV101YRH32 Quick start guide
- Type
- Quick start guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Logik L1HSTB12 User manual
-
-
Sharp TUT2HR32 User manual
-
Hitachi HDR253 User manual
-
Triax T2-HD 217 PVR Operating instructions
-
Akura APLDVD2YR1968VH User manual
-
-
Akura APLDVD2YR1968UCR User manual
-
-