Step 1.1
1. Connect the aerial cable to RF IN. 2.Connect the
HDMI cable between the HDMI connector on your
digital recorder and the HDMI on your TV. 3. Connect
the output from the power supply to the DC IN
connector on your digital box.
Step 1.2
Connect the mains power supply plug to a mains
power outlet socket and turn on the power socket.
Next connect the power jack commector to the DC IN
on the rear panel of the digital box.
Step 1.3
Remove the battery cover from the remote control and
insert 2 x AAA batteries (supplied) into the battery
compartment. Replace the battery cover.
Setting Up
1
Step 2.1
Select your TV screen type using the u and t
Buttons to move between the options: LETTERBOX 4:3,
PAN and SCAN 4:3, WIDESCREEN 4:3 and WIDESCREEN
16:9.
Step 2.2
Press the OK button to start the installation.
Step 2.3
Press the GREEN Button when installation has finished.
You will see the channels that have been found during
the installation. It will take about 8 minutes for your
digital box to find all the channels.
Step 2.4
When installation has successfully completed, the
channel at the top of the channel list will be shown
on your TV. The information banner will be shown on
screen for a short time.
First Time Install
2
Getting started
3
Getting around the Guide Now and Next information
To see what’s coming on next press the i-Button on
your remote control.
The display shows programme name and broadcast
times for the current and next programmes. You can
step along the row to reach more programmes using
the u and t Buttons. To remove this information from
the display, press the EXIT Button.
The Main Menu
Now and Next - Extended
To open the Guide, press the GUIDE Button.
Press the p and q buttons to select a new channel,
and the u Buttons to select the programme and press
the OK Button to watch the selected programme.
To close the GUIDE window press the GUIDE Button
again or press the BACK Button.
To open the Main Menu, press the MENU button.
Press the p and q Buttons to select an option.
From this menu you can organise your channels, retune
your digital box, change the default settings, or look at
the system information.
Press the i-Button a second time to view more
information including a synopsis of the programme.
You can view similar details about other progammes
on the ‘programme row’ by pressing the u and
t Buttons. Press the p and q Buttons to view
programmes on other channels (rows).
CLIP
BATTERIES
TYPE AAA
BATTERY
COMPARTMENT
BATTERY
COMPARTMENT
LID
Fitting batteries to remote control
Connecting up Turning on
First time installation
Viewing installed channels
Auto view of first channel
Starting installation