Sterling Plumbing 71140112 Dimensions Guide

Sterling Plumbing
Brand
Sterling Plumbing
Model
71140112
Type
Dimensions Guide

This manual is also suitable for

Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Above-floor-drain (AFD) rough-in
•
Durable high-gloss finish
•
Modular 4-piece design
•
Pivot ″snap together″ installation
•
Wall surround available with smooth finish or glazed
tile appearance
•
10-year consumer/3-year commercial limited warranty
•
Caulkless seam installation
•
17-1/4″ (43.8 cm) bath depth (floor to top of
threshold)
•
60-1/4″ (153 cm) x 31-1/4″ (79.4 cm) x 75-1/2″
(191.8 cm) complete unit rough-in dimensions include
flanges
•
60″ (152.4 cm) x 30″ (76.2 cm) x 74-1/4″ (188.6 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z124.1.2
•
ASTM E162
•
ASTM E662
•
CSA B45.5
60″ (152.4 cm) AFD BATH AND WALL
SURROUND
71140112
ALSO 71140122, 71240112, 71240122
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71140112 60″ (152.4 cm) AFD bath and wall surround, tile wall, left drain ❑ 0 ❑ Other_____
71140122 60″ (152.4 cm) AFD bath and wall surround, tile wall, right drain ❑ 0 ❑ Other_____
71240112 60″ (152.4 cm) AFD bath and wall surround, smooth wall, left drain ❑ 0 ❑ Other_____
71240122 60″ (152.4 cm) AFD bath and wall surround, smooth wall, right drain ❑ 0 ❑ Other_____
Model ADA Adaptive Component Description Colors/Finishes
71140118 AFD complete unit with age in place backers, left drain ❑ 0 ❑ Other_____
71140128 AFD complete unit with age in place backers, right drain ❑ 0 ❑ Other_____
71240118 AFD complete unit with age in place backers, left drain ❑ 0 ❑ Other_____
71240128 AFD complete unit with age in place backers, right drain ❑ 0 ❑ Other_____
ACCORD
®
Page 1 of 2
1067279-4-
F
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Fixture*:
Basin area:
Bathing well 46-1/4″ (117.5 cm) x 20-1/2″ (52.1 cm)
Top area 52-1/4″ (132.7 cm) x 22-1/2″ (57.2 cm)
To overflow:
Water depth 11″ (27.9 cm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71140112
71140122
71240112
71240122
56-3/4″ (144.1 cm) 56-1/2″ (143.5 cm)
Installation Notes
Install this product according to the installation guide.
Product is designed to be used with a single-handle mixer
valve with an escutcheon cover not to exceed 7-3/4″ (19.7
cm) in width.
Size the drain hole clearance to fit the drain assembly that will
be used.
Studs should be positioned roughly as shown.
Bath cannot be installed without the wall surround.
The width of the module gets 5/8″ (1.6 cm) narrower at the
back. Furring strips (approximately 1/4″ (6 mm)) should be
used at the back corner studs if the drywall will overlap the
nailing flange.
30" (76.2 cm)
15-1/4"
(38.7 cm)
8"
(20.3 cm)
8"
(20.3 cm)
14"
(35.6 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
4" (10.2 cm)
16" (40.6 cm)
55"
(139.7 cm)
75-1/2"
(191.8 cm)
1-1/4" (3.2 cm)
3-1/8" (7.9 cm)
Overflow Detail
3-1/2"
(8.9 cm)
2" (5.1 cm) D.
Drain
10"
(25.4 cm)
31-1/4"
(79.4 cm)
6" (15.2 cm)
(Typical)
21-1/4"
(54 cm)
20-1/4"
(51.4 cm)
2" (5.1 cm)
Minimum Drain
Hole Clearance
Through Wall
22-1/4"
(56.5 cm)
59-3/8"
(150.8 cm)
31-1/4"
(79.4 cm)
30"
(76.2 cm)
17-1/4"
(43.8 cm)
60"
(152.4 cm)
3" (7.6 cm) Drain
Bottom to Floor
Product Diagram
ACCORD
®
ACCORD
®
60″ (152.4 cm) AFD BATH AND WALL SURROUND
Page2of2
1067279-4-
F
  • Page 1 1
  • Page 2 2

Sterling Plumbing 71140112 Dimensions Guide

Sterling Plumbing
Brand
Sterling Plumbing
Model
71140112
Type
Dimensions Guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents