Dell SE2716H User guide

Model: SE2716H

Regulatory model: SE2716Ht

Dell SE2716H Monitor

User’s Guide

NOTE: A NOTE indicates important information that helps you make better use of

your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if

instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal

injury, or death.

international copyright and intellectual property laws.

Dell

™

and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All

other marks and names mentioned herein may be trademarks of their respective companies.

2016 – 05 Rev. A01

Contents

About Your Monitor ..................................... 5

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Identifying Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Monitor Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Plug-and-Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

LCD Monitor Quality and Pixel Policy. . . . . . . . . . . . . . . . . . . . . . .17

Setting Up the Monitor.................................. 18

Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting Your Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Organizing Your Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Removing the Monitor Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Operating the Monitor .................................. 23

Turning on the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using the Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using the On-Screen Display (OSD) Menu . . . . . . . . . . . . . . . . . . . 25

Using Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Troubleshooting ....................................... 39

Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Built-in Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Common Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Contents | 3

4 | Contents

Product Specific Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Mobile High-Definition Link (MHL) Specific Problems. . . . . . . . . . . . 44

Speakers Specific Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Appendix ..............................................45

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

FCC Notices (U.S. only) and Other Regulatory Information . . . . . . . . 45

Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Setting Up Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Maintenance Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

About Your Monitor | 5

About Your Monitor

Package Contents

Your monitor ships with the components shown below. Make sure that you have

received all the components and contact Dell if something is missing.

NOTE: Some items may be optional and may not ship with your monitor.

Somefeatures or media may not be available in certain countries.

Monitor

Stand riser

Stand base

Power cable (varies by country)

HDMI cable

6 | About Your Monitor

•Drivers and documentation media

•Quick Setup Guide

•Safety and Regulatory Information

Product Features

The Dell SE2716H curved monitor has an active matrix, thin-film transistor (TFT), liquid

crystal display (LCD), and light emitting diode (LED) backlight. The monitor features

include:

• 68.58cm (27-inch) viewable area display (measured diagonally).

1920x1080 resolution with full-screen support for lower resolutions.

• Wide viewing angle to allow viewing from a sitting or standing position, or while

moving from side-to-side.

• Mega dynamic contrast ratio (8,000,000:1).

• Tilt capability.

• Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling easier

set up with an elegant viewing experience.

• HDMI(MHL) offers seamless connectivity to secondary devices such as select

smartphones , DVD players, gaming consoles etc.

• Removable stand.

• Plug and play capable if supported by your system.

• Color gamut of 85% (typical).

• On-screen display (OSD) adjustments for easy setup and screen optimization.

• Software and documentation media includes an information file (INF), Image-color

matching file (ICM), and product documentation.

• Dell display manager software (available on the disc shipped with the monitor).

• Security-lock slot.

• Capability of switching from wide aspect to standard aspect ratio while maintaining

image quality.

• BFR/PVC- reduced.

• TCO-certified displays.

• Arsenic-free glass and mercury-free for the panel only.

• 0.3 W standby power when in the sleep mode.

• Energy gauge shows the energy level being consumed by the monitor in real time.

• Analog backlight dimming control for flicker free display.

About Your Monitor | 7

Identifying Parts and Controls

Front view

Label Description

1 Function buttons (For more information, see Operating the Monitor)

2 Power on/off button (with LED indicator)

Back View

Label Description Use

1 Security-lock slot Secures monitor with security lock

(sold separately).

2 Barcode, serial number, and

Service Tag label

Refer to this label if you need to contact

Dell for technical support.

3 Regulatory label Lists the regulatory approvals.

4 Letter etching Lists the regulatory approvals.

5 Cable-management slot Use to organize cables by placing them

through the slot.

8 | About Your Monitor

Bottom View

Label Description Use

1 AC power connector To connect the monitor power cable.

2 HDMI (MHL) 1 port Connect your computer with HDMI cable or

portable device with MHL cable.

3 HDMI (MHL) 2 port Connect your computer with HDMI cable or

portable device with MHL cable.

4 VGA port Connect your computer with VGA cable (optional).

5 Audio-in port Connect to your computer audio output (optional).

6 Headphone port

WARNING: Excessive sound pressure from

earphones or headphones can cause hearing

damage or loss.

Monitor Specifications

Flat Panel Specifications

Screen type Active matrix - TFT LCD

Panel type Vertical Alignment

Panel curvature 4000 mm radius

Viewable image:

Diagonal 68.58 cm (27 inches)

Active Area:

Horizontal 597.36 mm (23.52 inches)

Vertical 336.31 mm (13.24 inches)

Area 200898.14 mm

2

(311.40inch

2

)

Pixel pitch 0.3114 mm x 0.3114 mm

Viewing angle:

Horizontal 178° (typical)

About Your Monitor | 9

Vertical 178° (typical)

Luminance output 300 cd/m² (typical)

Contrast ratio 3000 to 1 (typical)

8,000,000 to 1 (mega dynamic contrast on)

Faceplate coating AG type, Haze 2.3% , Hard coating (2H)

Backlight White LED Edge slim Backlight

Response time Fast mode: 6ms grey-to-grey (typical)

Normal mode: 8ms grey-to-grey (typical)

Color depth 16.7 million colors

Color gamut 85% (typical)*

*SE2716H Color gamut (typical) is based on CIE1976 (85%) and CIE1931 (72%) test

standards.

Resolution Specifications

Horizontal scan range 30 kHz to 83 kHz (automatic)

Vertical scan range 56 Hz to 76 Hz (automatic)

Maximum preset resolution 1920x1080 at 60 Hz

Video display capabilities

(VGA & HDMI & MHL playback)

480i, 480p, 576i, 576p, 720p, 1080i, 1080p

Preset Display Modes

Display Mode

Horizontal

Frequency

(kHz)

Vertical

Frequency (Hz)

Pixel Clock

(MHz)

Sync Polarity

(Horizontal/

Vertical)

VESA, 720 x 400 31.5 70.0 28.3 -/+

VESA, 640 x 480 31.5 60.0 25.2 -/-

VESA, 640 x 480 37.5 75.0 31.5 -/-

VESA, 800 x 600 37.9 60.0 40.0 +/+

VESA, 800 x 600 46.9 75.0 49.5 +/+

VESA, 1024 x 768 48.4 60.0 65.0 -/-

VESA, 1024 x 768 60.0 75.0 78.8 +/+

VESA, 1152 x 864 67.5 75.0 108.0 +/+

VESA, 1280 x 1024 64.0 60.0 108.0 +/+

VESA, 1280 x 1024 80.0 75.0 135.0 +/+

VESA, 1600 x 1200 75.0 60.0 162.0 +/+

VESA, 1920x1080 67.5 60.0 148.5 +/+

10 | About Your Monitor

MHL Source Display Modes

Display Mode Frequency (Hz)

640 x 480p 60

720 x 480p 60

720 x 576p 50

720 (1440) x 480i 60

720 (1440) x 576i 50

1280 x 720p 60

1280 x 720p 50

1920x1080i 60

1920x1080i 50

1920x1080p 30

1920x1080p 60

1920x1080p 50

Electrical Specifications

Video input signals •Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm

input impedance

•HDMI 1.4 (MHL 2.0), 600mV for each dierential line, 100

ohm input impedance per dierential pair

Synchronization input

signals

Separate horizontal and vertical synchronization,

polarity-free TTL level, SOG (Composite SYNC on green)

AC input voltage/

frequency/current

100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.5 A (maximum)

Inrush current 120 V:30 A (Max.) at 0 °C (cold start)

240 V:60 A (Max.) at 0 °C (cold start)

Speaker Specifications

Speaker rated power 2 x (3 W + 6 W)

Frequency response 100 Hz - 20 kHz

Impedance 8 ohm

About Your Monitor | 11

Physical Characteristics

Connector type •15-pin D-subminiature (black connector)

•HDMI (MHL) 1/HDMI (MHL) 2

•Audio-in

•Headphone-out

Signal cable type •Digital: detachable, HDMI, 19 pins

•Digital: detachable, MHL, 19 pins

•Analog: detachable, VGA, 15 pins

Dimensions (with stand):

Height 457.79 mm (18.02 inches)

Width 616.50 mm (24.27 inches)

Depth

176.15 mm (6.94 inches)

Dimensions (without stand):

Height 366.20 mm (14.42 inches)

Width 616.50 mm (24.27 inches)

Depth 71.28 mm (2.81 inches)

Stand dimensions:

Height 182.84 mm (7.20 inches)

Width 290.39 mm (11.43 inches)

Depth 176.15 mm (6.94 inches)

Weight:

With packaging 8.0 kg (17.64 lbs)

With stand assembly and cables 6.26 kg (13.80 lbs)

Without stand assembly

(no cables) 4.96 kg (10.93 lbs)

Stand assembly 1 kg (2.2 lbs)

Front frame gloss >85%

12 | About Your Monitor

Environmental Characteristics

Temperature:

Operating 0°C to 40°C (32°F to 104°F)

Non-operating –20°C to 60°C (–4°F to 140°F)

Humidity:

Operating

10% to 80% (non-condensing)

Non-operating 5% to 90% (non-condensing)

Altitude:

Operating 5,000 m (16,404 ft) (maximum)

Non-operating 12,192 m (40,000 ft) (maximum)

Thermal dissipation

•211.55 BTU/hour (maximum)

•98.95 BTU/hour (typical)

Power Management Modes

If you have VESA’s DPM-compliant video card or software installed in your PC, the

monitor can automatically reduce its power consumption when not in use. This is

referred to as power save mode*. If the computer detects input from the keyboard,

mouse, or other input devices, the monitor automatically resumes functioning. The

following table shows the power consumption and signaling of this automatic power

saving feature.

VESA

Modes

Horizontal

Sync

Vertical

Sync

Video Power Indicator Power Consumption

Normal

operation

Active Active Active White 62 W (maximum)**

29 W (typical)

Active-off

mode

Inactive Inactive Off Breathing White

(blinking slowly)

Less than 0.3 W

Switch off - - - Off Less than 0.3 W

About Your Monitor | 13

The OSD operates only in the normal operation mode. If you press any button in the

active-off mode, one of the following message is displayed:

or

*Zero power consumption in OFF mode can only be achieved by disconnecting the

AC mains cable from the monitor.

**Maximum power consumption with maximum luminance and speaker active.

Activate the computer and the monitor to gain access to the OSD.

14 | About Your Monitor

Pin Assignments

VGA port

Pin number 15-pin side of theconnected signal cable

1 Video-Red

2 Video-Green

3 Video-Blue

4 GND

5 Self-test

6 GND-R

7 GND-G

8 GND-B

9 Computer 5 V / 3.3 V

10 GND-sync

11 GND

12 DDC data

13 H-sync

14 V-sync

15 DDC clock

About Your Monitor | 15

HDMI port

Pin number 19-pin side of theconnected signal cable

1 TMDS DATA 2+

2 TMDS DATA 2 SHIELD

3 TMDS DATA 2-

4 TMDS DATA 1+

5 TMDS DATA 1 SHIELD

6 TMDS DATA 1-

7 TMDS DATA 0+

8 TMDS DATA 0 SHIELD

9 TMDS DATA 0-

10 TMDS CLOCK+

11 TMDS CLOCK SHIELD

12 TMDS CLOCK-

13 CEC

14 Reserved (N.C. on device)

15 DDC CLOCK (SCL)

16 DDC DATA (SDA)

17 DDC/CEC Ground

18 +5 V POWER

19 HOT PLUG DETECT

16 | About Your Monitor

MHL port

Pin number 19-pin side of theconnected signal cable

1 N/C

2 CD_SENSE

3 N/C

4 N/C

5 TMDS_GND

6 N/C

7 MHL+

8 MHL_Shield

9 MHL-

10 N/C

11 TMDS_GND

12 N/C

13 N/C

14 N/C

15 CD_PULLUP

16 N/C

17 VBUS_CBUS_GND

18 VBUS

19 CBUS

2Shell Shield

About Your Monitor | 17

Plug-and-Play

You can install the monitor in any Plug-and-Play-compatible system. The monitor

automatically provides the computer system with its extended display identification data

(EDID) using display data channel (DDC) protocols so the computer can configure itself

and optimize the monitor settings. Most monitor installations are automatic; you can

select different settings if desired. For more information about changing the monitor

settings, see Operating the Monitor.

LCD Monitor Quality and Pixel Policy

During the LCD monitor manufacturing process, it is not uncommon for one or more

pixels to become fixed in an unchanging state which are hard to see and do not affect

the display quality or usability. For more information on LCD Monitor Pixel Policy, see

Dell support site at: www.dell.com/support/monitors.

18 | Setting Up the Monitor

Setting Up the Monitor

Attaching the Stand

NOTE: The stand riser and stand base are detached when the monitor is shipped

from the factory.

NOTE: The procedure below is applicable for the default stand. If you purchased

any other stand, see the documentation shipped with the stand to set it up.

CAUTION: Don’t put pressure on it when the monitor is on the ground facing up

or down.

Connect the stand riser to stand base.

1 Attach the stand riser to the stand base.

2 Tighten the thumbscrew below the stand base.

Attach the stand assembly to the monitor.

1 Put the Pizza box flat on the floor before open it.

2 Remove the paper cushion from the top of pizza box and lift protective cover.

3 Insert the two tabs on the upper part of the stand in the slots on the back of

the monitor.

4 Press the stand down till it snaps into place.

2

3

CAUTION: If the paper cushion is unavailable, use a thick sitting mat.

Setting Up the Monitor | 19

Place the monitor upright.

1 Slide one hand in the cutout area on the bottom cushion and use the other

hand to hold the stand.

2 Lift the monitor carefully to prevent it from slipping or falling.

3 Remove the protective cover from the monitor.

CAUTION: Do not press on the panel screen when lifting the monitor.

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the

Safety Instructions.

To connect your monitor to the computer:

1 Turn o your computer.

2 Connect the VGA/HDMI/Audio cable from your monitor to thecomputer.

3 Switch on your monitor.

NOTE: Do not connect multiple display cables to the same computer.

Connecting the VGA cable (optional)

VGA

Audio In

1 2

20 | Setting Up the Monitor

Connecting the HDMI cable

HDMI

Audio In

1 2

Connecting the audio cable (optional)

Audio

Audio In

1 2

Using the Mobile-High Definition Link (MHL)

NOTE: This monitor is MHL certified.

NOTE: To use the MHL function, use only MHL certified cable and source devices

that support MHL output.

NOTE: Some MHL source devices may take more than a few seconds or longer to

output an image, depending on MHL source devices.

NOTE: When the connected MHL source device enters standby mode, the monitor

displays a black screen or the message below, depending on MHL source device’s

output.

To enable MHL connection, please perform the below steps:

1 Plug the power cable on your monitor into a AC outlet.

2 Connect the (micro) USB port on your MHL source device to HDMI (MHL) 1/

HDMI (MHL) 2 port on the monitor with a MHL certified cable

(see Bottom View for details).

Page is loading ...

Dell SE2716H User guide

Dell SE2716H User guide

Related papers

Other documents