2. Computers & electronics
  3. Audio & home theatre
  4. Home audio sets
  5. Philips
  6. DC199B/37

Philips DC199B/37 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Philips DC199B/37 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Pull out the plastic
protective sheet
before use.
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
2
User Manual
FM antenna Remote Control
Quick Start Guide
User manual
Quick Start Guide
DC199
Pull out the plastic
protective sheet
before use.
AC power adaptor
8 X iPod dock adaptors
DC199 QUGG_Eng 2007.6.11, 10:431
1
2
Tip
See the User Manual for how to
connect other equipment to this
system.
Setting the clock
1
2
3
In standby mode, press PROG/CLOCK for more than two seconds.
➜ The clock digits flash.
Press ALBUM/PRESET 3/4 to set the minutes.
Press S/T to set the hours.
Press PROG/CLOCK to confirm the time.
4
/
3
AC power adaptor
FM wire antenna
Speaker (right) Speaker (left)
Connect the FM antenna.
Connect the AC power adaptor of the system.
Connect the speakers.
Note:
– Position the FM antenna away from the
speaker wires to avoid electrical interference.
2
1
3
DC199 QUGG_Eng 2007.6.11, 10:432
Enjoy
C
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press USB/AUX once or more to select USB.
Play the USB’s audio files.
Playing a USB mass storage device
With the system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1), memory cards (requires an additional
card reader to work with this system).
Programming and tuning to radio stations
1
2
3
Press TUNER to select the tuner source.
Press PROG/CLOCK for more than 3 seconds to program all
available stations.
Press ALBUM/PRESET 3 / 4 until the desired preset station is
displayed.
/
DC199 QUGG_Eng 2007.6.11, 10:433
Enjoy
C
Tip
Detailed playback features and additional functions are described in the User
Manual.
C Royal Philips Electronics N.V. 2007
All rights reserved.
PDCC-LC/JS-0726
Playing Apple iPod using DC199
1
2
3
Select the correct dock adaptor, as indicated on each adaptor, then fit it in
the dock.
Correctly place the compatible iPod player into the dock.
Press iPod to select the iPod source.
Power on your iPod player.
Select and play your favourite songs stored in the iPod player.
4
5
DC199 QUGG_Eng 2007.6.11, 10:434
/