2. Computers & electronics
  3. Audio & home theatre
  4. Audio tuners
  5. Philips
  6. DC570/12
DC570/12

Philips DC570/12 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Philips DC570/12 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What's included in the box?
    How do I connect the FM antenna?
    How do I set the clock?
    How do I play music from a USB device?
    How do I program radio stations?
    How do I play music from an Apple iPod?
SHU FFLE
ALBUM/
PRESET
REPEAT
SLEEP
MUTE
SET TIME
TIMER PROG
USB
SD
MENU AUX
POWER TUNER
TUNING
VOL
TUNING
+
DSC
DBB
Pull out the plastic
protective sheet
before use.
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
2
User Manual
FM antenna
Remote Control
Quick Start Guide
User manual
Quick Start Guide
DC570
AC power cord
4 X iPod dock adaptors
Line-in Cable
Remove the plastic
protective sheet
DC570 QUG_Eng 2010.4.6, 16:141
1
2
Tip
See the User Manual for how to
connect other equipment to this
system.
Setting the clock
1
2
3
In standby mode, press PROG/SET TIME for more than 3 seconds.
➜ The clock digits flash.
Press S/T to set the minutes.
Press TUNING +/- to set the hours.
Press PROG/SET TIME to confirm the time.
4
SHU FFLE
ALBUM/
PRESET
REPEAT
SLEEP
MUTE
SET TIME
TIMER PROG
USB
SD
MENU AUX
POWER TU NER
TUNING
VOL
TUNING
+
DSC
DBB
ALBUM/
PRESET
DSC
DBB
Connect the FM antenna.
Connect the power cord of the system.
Note:
– Position the FM antenna away from the
speaker wires to avoid electrical interference.
1
FM wire antenna
2
Important!
– To set clock in the Eco Power mode, press and hold POWER on the set for 3
seconds or more to switch to normal standby mode first before proceeding with the
procedures below.
DC570 QUG_Eng 2010.4.6, 16:142
Enjoy
C
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press USB to select USB.
Play the USB’s audio files.
Playing a USB mass storage device
With the system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1).
Programming and tuning to radio stations
1
2
3
Press TUNER to select the tuner source.
Press PROG/SET TIME for more than 3 seconds to program all
available stations.
Press ALBUM/PRESET 3 / 4 until the desired preset station is
displayed.
SHU FFLE
ALBUM/
PRESET
REPEAT
SLEEP
MUTE
SET TIME
TIMER PROG
USB
SD
MENU AUX
POWER TUNER
TUNING
VOL
TUNING
+
DSC
DBB
ALBUM/
PRESET
DSC
DBB
SHU FFLE
ALBUM/
PRESET
REPEAT
SLEEP
MUTE
SET TIME
TIMER PROG
USB
SD
MENU AUX
POWER TUNER
TUNING
VOL
TUNING
+
DSC
DBB
TUNER
PROG
ALBUM/
PRESET
DSC
DBB
Before using the remote control
1 Pull out the plastic protective sheet.
2 Select the source you wish to control by pressing one of the source
select keys on the remote control (for example USB, TUNER).
3 Then select the desired function (for example
ÉÅ, S, T)
DC570 QUG_Eng 2010.4.6, 16:143
Enjoy
C
Tip
Detailed playback features and additional functions are described in the User
Manual.
Playing Apple iPod using DC570
1
2
3
Select the correct dock adaptor, as indicated on each adaptor, then fit it in
the dock.
Correctly place the compatible iPod player into the dock.
Press iPod to select the iPod source.
Power on your iPod player.
Select and play your favourite songs stored in the iPod player.
4
5
© 2010 Koninklijke Philips
Electronics N.V.
All rights reserved.
http://www.philips.com
DC570_QSG_12_V2.0
DC570 QUG_Eng 2010.4.6, 16:144
/