Philips DCM230/12 Quick start guide

Category
Audio tuners
Type
Quick start guide

This manual is also suitable for

iPod
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
2
User Manual
FM antenna MW antenna Remote Control
Quick Start Guide
User manual
Quick Start Guide
DCM230
Pull out the plastic
protective sheet
before use.
AC power adaptor
4 X iPod dock adaptors
DCM230 QUGG_Eng 8/6/08, 13:241
AC power adaptor
MW loop
antenna
FM wire antenna
Connect the MW and FM antennas.
Connect the AC power adaptor of the system.
1
2
Tip
– See the User Manual for how to
connect other equipment to this
system.
– Use the supplied AC power
adaptor only! Using any other
power connection device may
damage your main set!
2
1
Setting the clock
1
2
3
In standby mode, press PROG.
SET CLOCK is displayed briefly. Then, 12HR or 24HR is displayed.
Press ALBUM/PRESET +/- (or ¡ / on the remote control) to select
clock mode.
The clock digits for the hours continue to flash.
Press ALBUM/PRESET +/- (or ¡ / on the remote control) to set the
hours.
Press PROG again.
The clock digits for the minutes flash.
Press ALBUM/PRESET +/- (or ¡ / on the remote control) to set the
minutes.
Press PROG to confirm the time.
4
5
6
TIMER
iPod
DCM230 QUGG_Eng 8/6/08, 13:242
Enjoy
C
Playing a disc
1
2
3
Insert a disc into the disc loader.
Make sure the label side is facing up.
Press ÉÅ to start playback.
To stop playback, press 9.
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
Programming and tuning to radio stations
1
2
3
Press SOURCE repeatedly (or TUNER on the remote control) to
select the tuner source.
Press PROG for more than two seconds to program all available
stations in order of waveband.
Press ALBUM/PRESET +/- (or 3 / 4 on the remote control)
until the desired preset station is displayed.
iPod
DCM230 QUGG_Eng 8/6/08, 13:243
Enjoy
C
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
C Royal Philips Electronics N.V. 2007
All rights reserved.
PDCC-JH/ZYL-0832
GB
Playing Apple iPod using DCM230
1
2
3
Select the correct dock adaptor, as indicated on each adaptor, then fit it in
the dock.
Correctly place the compatible iPod player into the dock.
Press SOURCE on the system repeatedly or iPod on the remote control
to select the iPod source.
Power on your iPod player.
Select and play your favourite songs stored in the iPod player.
4
5
Notes for remote control:
First select the source you wish to control by
pressing one of the source select keys on the
remote control (for example CD, FM).
Then select the desired function (for example
ÉÅ
,
à
,
á
).
DCM230 QUGG_Eng 8/6/08, 13:244
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Philips DCM230/12 Quick start guide

Category
Audio tuners
Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages