2. Home
  3. Lighting
  4. Stroboscopes & disco lights
  5. EQUINOX
  6. Shard
Shard

EQUINOX Shard, EQLED089, Hot Rod EQLED089 User manual

  • Hello! I am an AI chatbot trained to assist you with the EQUINOX Shard User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Order code: EQLED089
Hot Rod
User Manual
www.prolight.co.uk Hot Rod User Manual
2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageis
between100~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLight
dealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thislightingxtureisforprofessionaluseonly-itis
notdesignedfororsuitableforhouseholduse.The
productmustbeinstalledbyaqualiedtechnicianin
accordancewithlocalterritoryregulations.Thesafetyof
theinstallationistheresponsibilityoftheinstaller.The
xturepresentsrisksofsevereinjuryordeathduetore
hazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingto
EN62471.Donotviewthelightoutputwithoptical
instrumentsoranydevicethatmayconcentratethebeam.
• WARRANTY:Oneyearfromdateofpurchase.
www.prolight.co.uk Hot Rod User Manual
3
Product overview & technical specications
Thiscompactmovingheadbeameffectfeatures8fastsweepingbeamsfromitstwin-tiltingbarsofeight3WLEDs.
Thesweepingbarsarettedtoarotatingbasethatlltheroomwithpinsharpcolouredbeamsandlooksuperb
whenusedwithfogorhaze.TheLEDschaseandpulsateacrossbothofthexture’stiltingbarsensuring
adynamiclightshow.
•8x3WCREELEDs(R:2,G:2,B:2,W:2)
•Beamangle:3.4°
•DMXchannels:1/11or15selectable
•Auto,soundactiveandmaster/slavemodes
plusbuilt-inprograms
•Pan:540°,Tilt:205°
•0-100%dimmingandvariablestrobe
•Suppliedwithmetalhangingbracket
•4pushbuttonmenuwithLEDdisplay
•IECpowerinput
•3-PinXLRinput/output
•Fancooled
Hot Rod
Specications
Powerconsumption 50W
Powersupply 100~240V,50/60Hz
Fuse F3A250V
Dimensions 285x300x247mm
Weight 3kg
Ordercodes EQLED089
285mm
300mm
247mm
www.prolight.co.uk Hot Rod User Manual
4
Technical specications
DMX INPUT DMX OUTPUT
FUSE: F3A 250V
www.prolight.co.uk
POWER INPUT:
100-240V~50/60Hz
MICMENU DOWNUP ENTER
02 0301 04 05 07 0806
01-LEDdisplay
02-Functionbuttons
03-Microphone
04-3-PinDMXinput
05-3-PinDMXoutput
06-IECpowerinput
07-FuseF3A250V
08-Fan
Inthebox:1 x xture,
1 x hanging bracket,
1 x power cable,
& 1 x user manual
www.prolight.co.uk Hot Rod User Manual
5
Operating instructionsOperating instructions
MENU
1
5 1 2
A d d r
DMX address setting
1 C h
1 1 C h
1 5 C h
C h N d
Channel modes
N A s t
S L 1
S L 2
S L N d
Master/slave mode
S h 1
S h 4
S h n d
Show modes
0
1 0 0
S e n S
Sound sensitivity
o n
o F F
S o U n
Sound active
o n
o F F
A u t o
Auto mode
n o
y e s
P I n t
Pan invert
n o
y e s
t I n 1
Tilt 1 invert
n o
y e s
t I n 2
Tilt 2 invert
o n
o F F
L e d
LED backlight
d I S P
d S I p
d I S P
Display invert
t e S t
Fixture test
r s e t
Motor reset
www.prolight.co.uk Hot Rod User Manual
6
DMX mode:
OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes
tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitof
thextureandeachxtureindependently.
ToaccesstheDMXaddressmode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonson
therearoftheunittoshowAddrontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
DMX channel mode:
ToaccesstheDMXchannelmode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonson
therearoftheunittoshowChNdontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstochooseoneofthe1/11or15DMXchannelmodes.Pressthe“ENTER”
buttontoconrmthesetting.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Operating instructions
11 channel mode:
Channel Value Function
CH1 000-255 Panadjustment0-540°
CH2 000-255 Tilt1adjustment0-205°
CH3 000-255 Tilt2adjustment0-205°
CH4 000-255 Pan/tiltspeed
CH5 000-255 Masterdimmer(0-100%)
CH6
000-007 LEDoff
008-015 LEDon
016-131 Strobe(slow-fast)
132-139 LEDon
140-181 Stroberampdown
182-189 LEDon
190-231 Stroberampup
232-239 LEDon
240-247 Randomstrobe
248-255 LEDon
CH7 000-255 Red(0-100%)
CH8 000-255 Green(0-100%)
CH9 000-255 Blue(0-100%)
CH10 000-255 White(0-100%)
CH11
000-007 Nofunction
008-063 Automode
064-127 Soundactive
128-255 Motorreset
1 channel mode:
Channel Value Function
CH1
000-007 Blackout
008-067 Show1(sensitivitylow-high)
068-127 Show2(sensitivitylow-high)
128-187 Show3(sensitivitylow-high)
188-247 Show4(sensitivitylow-high)
248-255
Randomshows
(sensitivitylow-high)
www.prolight.co.uk Hot Rod User Manual
7
15 channel mode:
Channel Value Function
CH1 000-255 Panadjustment0-540°
CH2 000-255 Tilt1adjustment0-205°
CH3 000-255 Tilt2adjustment0-205°
CH4 000-255 Pan/tiltspeed
CH5 000-255 Masterdimmer(0-100%)
CH6
000-007 LEDoff
008-015 LEDon
016-131 Strobe(slow-fast)
132-139 LEDon
140-181 Stroberampdown
182-189 LEDon
190-231 Stroberampup
232-239 LEDon
240-247 Randomstrobe
248-255 LEDon
CH7 000-255 Red1(0-100%)
CH8 000-255 Green1(0-100%)
CH9 000-255 Blue1(0-100%)
CH10 000-255 White1(0-100%)
CH11 000-255 Red2(0-100%)
CH12 000-255 Green2(0-100%)
CH13 000-255 Blue2(0-100%)
CH14 000-255 White2(0-100%)
CH15
000-007 Nofunction
008-063 Automode
064-127 Soundactive
128-255 Motorreset
Operating instructions
www.prolight.co.uk Hot Rod User Manual
8
Operating instructions
Master/slave mode:
Tosetthemasterunit,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherear
oftheunittoshowSLNd ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and
“DOWN”buttonstochooseNast.Pressthe“ENTER”buttontoconrmthesetting.
Thenselectyourdesiredprogram.
Tosettheotherunitsinslavemode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttons
ontherearoftheunittoshowSLNdontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe
“UP”and“DOWN”buttonstochooseeitherSL 1~SL 2.Pressthe“ENTER”buttontoconrmthe
setting.Theunitwillnowruninsequencewiththemasterunit.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.
Show mode:
Toaccesstheshowmodes,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherear
oftheunittoshowShndontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and
“DOWN”buttonstochoosebetweenSh 1~Sh 4.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Auto mode:
Toaccesstheautomodesetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonson
therearoftheunittoshowAutoontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstochoosebetweenonorofF.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Sound active:
Toaccessthesoundactivesetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonson
therearoftheunittoshowSoUnontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstochoosebetweenonorofF.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Sound sensitivity:
Toadjustthesoundsensitivity,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsonthe
rearoftheunittoshowSensontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstochoosebetween0~100.Pressthe“ENTER”buttontoconrmthesetting.
Value: 0 - 100 (0 = low, 100 = high)
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
www.prolight.co.uk Hot Rod User Manual
9
Pan invert setting:
Toaccessthepaninvertsetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonson
therearoftheunittoshowPIntontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstochoosebetweennooryes.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Tilt 1 invert setting:
Toaccessthetilt1invertsetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonson
therearoftheunittoshowtIn1ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstochoosebetweennooryes.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Tilt 2 invert setting:
Toaccessthetilt2invertsetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonson
therearoftheunittoshowtIn1ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstochoosebetweennooryes.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
LED backlight:
ToaccesstheLEDbacklightsetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonson
therearoftheunittoshowLedontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstochoosebetweenonorofF.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Display invert setting:
Toaccessthedisplayinvertsetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonson
therearoftheunittoshowdIspontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstochoosebetweendISPordSIP.Pressthe“ENTER”buttontoconrmthe
setting.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Fixture test:
Toaccessthexturetestsetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonson
therearoftheunittoshowtestontheLEDdisplay.Nowpressthe“ENTER”button.Theunitwill
nowrunthroughitstests(colours,fullonandthenmotorrotation).
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Motor reset:
Toresetthemotors,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearofthe
unittoshowrsetontheLEDdisplay.Nowpressthe“ENTER”buttontoperformthereset.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Operating instructions
www.prolight.co.uk Hot Rod User Manual
10
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”
from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel
indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas
addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105
and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe
chainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent
xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.
DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”
XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether
andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.
ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest
cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe
DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein
aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda
DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,
nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.
YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,
seeimagebelow.
Also remember that DMX cable must be daisy chained and cannot be split.
DMX setup
FurtherDMXcablescanbe
purchasedfromallgoodsound
andlightingsuppliersor
ProLightConceptsdealers.
Pleasequote:
CABL10 – 2m
CABL11 – 5m
CABL12 – 10m
www.prolight.co.uk Hot Rod User Manual
11
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables
shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs
outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,
youmayneedtouseaterminatoron
thelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures
maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa
3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmission
problemsandinterference.itisalways
advisabletoconnectaDMXterminal,
(resistance120Ohm1/4W)betweenpin2
(DMX-)andpin3(DMX+)ofthelastxture.
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup
www.prolight.co.uk Hot Rod User Manual
12
WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
/