Noble House 15862 Operating instructions

Type
Operating instructions

This manual is also suitable for

No.
A
B
C
D
CAUTION: You must read this before you proceed.
DescriptionPicture
CAUTION : This Chair is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Counter Chair and to prevent damage to the Chair, 02 persons may be neede
d
execute this action.
Arm Chair
Seat Panel
Left Arm Panel
Right Arm Panel
Backrest
Noble House Home Furnishings LLC Page 1 of 12
E
F
No.
Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Assemble on a clean non-marring surface (packing foam).
Save all packaging until finished.
Description
Seat Cushion
Allen Key
Screws
(M6x80mm)
Bolts
(M6x60mm)
Back Cushion
Picture
Before Beginning Assembly:
Slevee nut (6x15)
Noble House Home Furnishings LLC Page 2 of 12
OVERVIEW
Step 2
Step 1
Unpack and place all parts on a clean, non-marring surface.
Attach Back rest (C) with the Seat panel (D) as shown in picture.
Then secure the Back rest (C) and the Seat panel (D) by using Screw () and Allen Key ()
.
Do not fully tigthen the Screws.
This Counter Chair has multiple parts and may require up to 30 minutes to assemble. To give
y
overview of the Counter Chair parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions herebelow to familiarise the parts and steps
assembly.
FRONT
SeatPanel (D)
Backrest(C)
Leftarmpanel(A)
Rightarmpanel(B)
Noble House Home Furnishings LLC Page 3 of 12
Attach Right Armrest (B) with the assembled frame in step 2 as shown in picture.
Then secure the Right Armrest (B) with the assembled frame by using Bolts (), Slevee nut (
Allen Key ().
Do not fully tigthen the Bolts.
Step 3
Step 4
Turn the chair to reverse side.
Repeat Step 3 to attach Left Armrest (C) with the assembled frame in step 3 as shown in pictu
Do not fully tigthen the Bolts.
Noble House Home Furnishings LLC Page 4 of 12
Turn the Chair right side up
Place the Chair on a LEVEL SURFACE to see if it wobbles.
If it wobbles, lift the Chair to some 30cm to 50cm height from the ground.
Keep your feet and toes well away from the drop zone.
Drop the Chair freely and vertically with the four legs, hitting the ground, at the same time.
This Drop Test will help to ensure that all the screws and gaps to all reach full alignment statu
s
Test again for evenness on a LEVEL SURFACE.
If no wobbles found, proceed to tighten all the bolts/screws.
CAUTION: When tightening these bolts/screws, tighten sequentially.
DO NOT tighten any bolts/screws fully and then towards the next one.
This would cause the frame to warp.
If there is still wobbles, loosen the bolts/screws and execute this same drop tests.
WARNING! IF THE CHAIR IS NOT STABLE , IT COULD LEAD TO DAMAGE THE PRODU
C
Step 6
Step 5
Inspect the Chair and make sure all parts are connected.
Place Back cushion (F) and Seat cushion (E) onto the chair as shown picture.
Your Chair is ready for use.
Caution: This Chair can only be used on a flat, level surface.
30CM~50CM
Noble House Home Furnishings LLC Page 5 of 12
Noble House Home Furnishings LLC Page 6 of 12
Qty
1
1
1
1
d
to
Noble House Home Furnishings LLC Page 7 of 12
1
1
Qty
5
5
3
2
Noble House Home Furnishings LLC Page 8 of 12
.
y
ou an
before
Noble House Home Furnishings LLC Page 9 of 12
) and
re.
Noble House Home Furnishings LLC Page 10 of 12
s
.
C
T.
Noble House Home Furnishings LLC Page 11 of 12
Noble House Home Furnishings LLC Page 12 of 12
No. Qty
A
1
Table Top
CAUTION: You must read this before you proceed.
DescriptionPicture
CAUTION : This Table is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Table and to prevent damage to the Table, 02 persons
may be needed to execute this action.
TABLE
Noble House Home Furnishings LLC Page 1 of 5
B
2
No. Qty
7
1
Before Beginning Assembly:
Bolts
(M6 x 35mm)
This Table has multiple parts and may require up to 30 minutes to assemble.
To give you an overview of the Table parts, the above picture is to help you put the various parts into
perspective.
Please read through the instructions herebelow to familiarise the parts and steps before assembly.
Allen Key
DescriptionPicture
Leg Panels
TableTop (A)
LegPanels(B)
Noble House Home Furnishings LLC Page 2 of 5
Step 1
Step 3
Place the Table Top (A) facedown, onto a clean, soft surface to avoid any scratches or
damages to the product.
Position the Leg Panel (B) into the Table Top (A) as shown in picture above.
Then affix Leg Panel (B) to Table Top (A) by using Bolt () and Allen Key ().
DO NOT FULLY TIGHTHEN THE BOLTS
Repeat the same process 2.2 to affix another Leg Panel (B) to Table Top (A).
DO NOT FULLY TIGHTHEN THE BOLTS
Unpack and place all parts on a clean, non-marring surface.
Step 2
Noble House Home Furnishings LLC Page 3 of 5
Turn the Table right side up
Place the Table on a LEVEL SURFACE to see if it wobbles.
If it wobbles, lift the Table to some 30cm to 50cm height from the ground.
Keep your feet and toes well away from the drop zone.
Drop the Table freely and vertically with the four legs, hitting the ground, at the same time.
This Drop Test will help to ensure that all the screws and gaps to all reach full alignment status.
Test again for evenness on a LEVEL SURFACE.
If no wobbles found, proceed to tighten all the bolts.
CAUTION: When tightening these bolts tighten sequentially.
DO NOT tighten any bolts fully and then towards the next one.
This would cause the frame to warp.
If there is still wobbles, loosen the bolts and execute this same drop tests.
WARNING! IF THE TABLE IS NOT STABLE , IT COULD LEAD TO DAMAGE THE PRODUCT.
Step 4
30CM~50CM
Noble House Home Furnishings LLC Page 4 of 5
Noble House Home Furnishings LLC Page 5 of 5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

Noble House 15862 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI