Honeywell 8732101 User manual

Type
User manual
Page 1
Models 8732001, 8732101, 8732301, 8732401
Read this manual carefully before installing and operating!
Installation & Operation Guide
Electronic Entry Lock with Knob
ENGLISH
Index
INSTALLATION INSTRUCTIONS
Package Contents / Tools Required...........................................................Page 1
Prepare Door and Jamb...............................................................................Page 2
Adjusting Latch / Installing Latch...............................................................Page 3
Installing Exterior Assembly........................................................................Page 4
Installing Interior Assembly........................................................................Page 5-6
OPERATION INSTRUCTIONS
Exterior Assembly Overview......................................................................Page 7
Locking and Unlocking / Changing Programming Code /
Adding User Codes......................................................................................Page 8
Deleting User Codes / Automatic Lock Function /
Temporarily Disable Auto Lock..................................................................Page 9
VacationMode/SecureLock-outPeriod/SoundONandO
Restore Factory Settings / Low Battery Warning.....................................Page 10
Consumer Friendly Message Guide / Installation Trouble Shooting......Page 11
Consumer Assistance.................................................................................Page 12
Programming Record..................................................................................Page 13-14
Template.......................................................................................................Page 15
Limited Warranty.........................................................................................Page 17
Page 1
INSTALLATION INSTRUCTIONS
Package Contents
Tools Required
Tools Required for Installation
on Pre-drilled Doors:
• PhillipsScrewdriver
Tools Required for Installation
on Doors That Require Drilling:
• Drill
• TapeMeasure
• Pencil
• 2-1/8”(54mm)DrillHoleSaw
• 1”(25mm)Drill
•1/16”(2mm)Drill
• Chisel
• Hammer
• PhillipsScrewdriver
DONOTRETURNTOSTORE!Ifanypartsaremissingordamaged,
pleasecallCustomerServicetollfreeat1-800-860-1677Ext.1801(M-F8am–5pmPST)
Strike Plate
Latch(Adjustable)
2-3/8”(60mm)to2-3/4”(70mm)
5/16”(8mm)Screws-2ea.
3/4”(19mm)Screws-5ea.
InteriorAssembly
Mounting Plate
ExteriorAssembly
Entrykeys(2ea.)
7/8”(22mm)Screws-2ea.
1”(25mm)Screw-1ea.
Page 2
NOTE: For installation on doors with pre-drilled holes skip to 4e.
1. TEMPLATE
a.Cutouttemplateprintedonpage15ofthisManual
(Figure1a).
b. Foldtemplateandplaceondoor36”(915mm)from
thegroundasmarked(Figure1b).
2. MARK THE DOOR FOR DRILLING
b. Mark center hole on door edge through guide on
templatefor1”(25mm)latchbolt(Figure2a).
a. Mark center hole on door face through guide on
templatefor2-3/8”(60mm)or2-3/4”(70mm)
backset(Figure2b).
3. DRILL AND CHISEL DOOR
a.Drill2-1/8”(54mm)holethroughdoorfaceasmarked
forlockset(Figure3a).
b.Drill1”(25mm)holeincenterofdooredgefor
Latch(Figure3b).
c. Insert Latch in hole keeping it parallel to
faceofdoor.MarkoutlineandremoveLatch
(Figure3c).
d.Chisel1/8”(3mm)deeporuntillatchfaceisush
withdooredge(Figure3d).
4. MARK AND DRILL DOOR JAMB
a. MarkcenterholeonedgeofjambevenwiththecenteroftheLatchBoltondoor
edge.(Figure4a).
b.Drill1”(25mm)hole1-3/16”(30mm)deepindoorjamboncentermark
(Figure4b).
c.OutlineoutsideedgesofStrikePlate(Figure4c).
d.Chisel1/8”(3mm)deepforStrikePlateoruntilush(Figure4d).
e.InstallStrikePlateusingtwo3/4”(19mm)screwsprovided(Figure4e).
PREPAREDOORANDJAMB
Figure4a Figure4b
Figure4c Figure4e
Figure4d
NOTE: For Drive in Latch, drill hole size indicated on template and press
untilitisushwithdooredge.
Figure1a
Figure2a Figure2b
Figure3a
Figure3c
Figure1b
Figure3b
Figure3d
Page 3
5. INSTALLING THE LATCH (need phillips head screwdriver)
a.Makesurethefaceplatesitsushwiththedoor.Donotforce
thelatchintothemortiseush.Chiseloutexcessmaterialif
necessaryforausht(Figure5a).
b.Usingtwo3/4”(19mm).screwsprovided,screwthelatchintothe
doorwithahandheldscrewdriver.DONOTOVERTIGHTEN
(Figure5b).
ADJUSTINGLATCH
NOTE: Latch is shipped with the backset set at 2-3/8” (60mm)
Measurethebackset(backsetisdistancebetweenedgeofthedoorandthe
centerofLock).
TO CONVERT FROM 2-3/8” (60mm) BACKSET TO 2-3/4” (70mm) BACKSET
TO CONVERT FROM 2-3/4” (70mm) BACKSET TO 2-3/8” (60mm) BACKSET
2-3/8"(60mm )
PULL
2-3/4"(70mm)
PUSH
NOTE: Curved part of Latch always faces
curved portion of Strike Plate
INSTALLINGLATCH
Figure5a
Figure5b
Page 4
NOTE: Tailpiece must be
positioned vertically
INSTALLINGEXTERIORASSEMBLY
7. SECURING THE EXTERIOR ASSEMBLY TO THE DOOR
a.Fromthesidemarked“Thissideagainstdoor”,
route the Control Wire through the rectangular
slotintheMountingPlate(Figure7a).
b.PlaceMountingPlateagainstdoorwithtailpiecepassing
throughthecenterholeinthethreeholeset(Figure7b).
c.SecuretheMountingPlatetotheExteriorAssemblyusing
two7/8”(22mm)Screws(Figure7c).
d.HandtightenwithaPhillipsScrewdriverleavingloosely
connected(Figure7d).
e.CheckthattheRubberGasketisproperlyalignedandcorrectasnecessary(Figure7e).
f.Checkverticalalignmentofthelock(Figure7f).
g.TightensecurelywithahandheldPhillipsScrewdriver.DO NOT OVER TIGHTEN
8. OPTIONAL INSTALLATION
a.Usinga1/16”(2mm)drillbit,drillapilotholeinyourdoor
usingtheMountingPlateupperholeasaguide(Figure8a).
b. Insert one 3/4”(19mm)screwandtighten.
Mounting Plate
3/4”(19mm)screw
(OptionalInstallation)
7/8”(22mm)screws
Control Wire
Figure8a
Figure7a-7f
NOTE: Rotate knob to ensure the latch is opening and closing easily.
6. INSTALLING THE EXTERIOR ASSEMBLY
Note: WorkwiththeDoorOpenforeasyaccess.Toaccessthemountingplate,unpack
theInteriorAssemblyandremovethebatterycoverbyslidingthecoverupward.Locate
thescrewsholdingtheMountingPlatetotheInteriorAssembly.Removethescrewsto
releasetheMountingPlatefromtheInteriorAssembly.
a.UnpacktheExteriorAssembly.Usecaretonotscratchthegreencircuitboard
during handling and installation.
b.CheckthattheRubberGasketisproperlyseatedontheExteriorAssembly
(Figure6a-b).
c.InserttheExteriorAssemblyontothedoorwiththetailpiecegoingthroughthe
Latch spindle in the VERTICAL POSITION. Route the Control Wire through
thedoorovertheLatch(Figure6c).
Rubber
Gasket
Control
Wire
Tailpiece
(Vertical)
Latch
Hole
Figure6a-b Figure6c
Page5
INSTALLINGINTERIORASSEMBLY
9. ATTACH THE CONTROL WIRE TO THE INTERIOR ASSEMBLY
a.UsecaretoattachtheControlWiremaleplugtotheInteriorAssemblyfemale
socketconnector(Figure9a).
b.DonotforcetheControlWiremaleplugintotheInteriorAssemblyfemale
socketconnector(Figure9b).
c.TheControlWiremaleplughastwoalignmenttabsonthesmoothsideofthe
plugwhichisthetopoftheplug(Figure9c).
d.TheControlWiremaleplugisinsertedwiththesmoothsideupintotheInterior
Assemblyfemalesocketconnector(Figure9d).
10. ATTACH THE INTERIOR ASSEMBLY TO DOOR
a.PositiontheInteriorAssemblyoverthetailpieceandpushtheInteriorAssembly
againstthedoor(Figure10a).
b.Usingtwo5/16”(8mm)screws and one 1”(25mm)screw, attach
theInteriorAssemblytotheMountingPlate.DO NOT OVER TIGHTEN SCREWS
(Figure10b).
5/16”(8mm)screws
1”(25mm)screw
NOTE: Lock and unlock using Interior Knob to see if the
latch is opening and closing easily.
Figure10a-b
Figure9a-d
Interior Wire
Connector
Plug
Page6
11. Installing Batteries
a.Insert4AAhighqualityAlkalinebatteriesintotheBatteryCompartmentinthe
directionnoted+/-ontheCompartment.TheLockwillbeep2times,thekeypad
willilluminateblue,andtheHoneywellbuttonwillashgreentwicetosignifythat
ithasreceivedpower(Figure11a).
b.SlidetheBatteryCoverdownintothetrackontheInteriorAssemblytocover
thebatteries(Figure11b).
12. Testing Lock
WiththeDoorOpen
a.TesttheLockusingtheInteriorKnob.TheLatchshouldmovesmoothly.
b.TestthelockusingtheKeypad.Tolockpressandthenpress“1234”
to unlock.
INSTALLINGINTERIORASSEMBLY(CONT.)
Override
AccessKey
Exterior Assembly
Interior Assembly
Interior
Knob
Battery
Cover
Light Indicator
Keypad
NOTE:DonottouchtheKeypaduntilthebluelightturnso.
Do not use rechargeable batteries or non-alkaline batteries.
Figure11a-b
INSTALLATION OVERVIEW
Strike Plate
BatteryCover
InteriorAssembly
Keys
Exterior
Assembly
Rubber Gasket
Tailpiece
Mounting Plate
Latch
5/16”(8mm)screws
Optional
3/4”(19mm)screw
3/4”(19mm)screws
7/8”(22mm)screws
1”(25mm)Screw
Page 7
OPERATION INSTRUCTIONS
ExteriorAssemblyOverview
Indicator light
Green
•IndicatesSuccessfulProgrammingStep
•IndicatesUnlockingisSuccessful
Red
•IndicatesFailedProgrammingStep
•IndicatesLockingisSuccessful
Electronic lock requires (4) High Quality
AA Alkaline batteries. When all 4 batteries
are installed in the correct position, hear 2
beeps and the keypad will illuminate blue.
DO NOT TOUCH the keypad until the keypad
stops illuminating.
Lock-Usedtolockdoor
Clear -Usedtoclearwrongkeypadentries
Unlock-Usedtounlockdoor
Programming -Usedinprogrammingsteps
5 Seconds -Completealltheprogrammingstepsintheprogrammingmodewithin5seconds.
Clear -Usethekeytoclearentriesincaseawrongbuttonispushed.
Lock button
Unlockbutton
FactorySettings
The lock comes factory preset with a:
Please change the Programming
Code and the User Code
as soon as possible after installation
to insure security.
Programming code - 123456
User code - 1234
User ID - 01
ID
PC
PC
UC
UC
Batteries(notincluded)
Programming Symbols
Lock / Clear
Unlock / Programming
Programming Code
User Code (4-8 digits)
User ID (01-50, 2 digits)
ID
PC
UC
Programming Tips
Page 8
TO UNLOCK THE LOCK
UsingKeypad:EnteravalidUserCode(defaultcodeis1234)andpressandhear
1 beep and lights green.
TOLOCKTHELOCK
UsingKeypad:Pressandthenhear2beepsandlightsred.
CHANGE CURRENT OR PRESET PROGRAMING CODE
FactorydefaultProgrammingCode=123456,thisisthemasterpasswordfor
yourlock.Allprogrammingfunctionsrequirethiscode.Followthebelowsequenceto
changetheProgrammingCodetoyourcustom6digitcombination.
TO ADD A NEW USER CODE (you can add up to 50 new user codes)
TheUserCodemustbea4-8digitcombination.EachUserCodeisthenlinked
toaUserID(whichisanynumberbetween01-50)toidentifyanindividualUser
Code.(UserID1-9shouldbeenteredas01-09sotheyare2digits).
Hear 1 beep and Light Indicator illuminates green.
RecordNewandChangedCodesonProgrammingRecordlocatedonPage13.
Hear 1 beep and Light Indicator illuminates green.
NOTE:WhenaNEWUSERCODEisset,thedefaultfactorycode(1234)isdeleted
for safety.
RecordNewandChangedCodesonProgrammingRecordlocatedonPage13.
123456 08 56785678
Forexample:toaddtheUserID-08toUserCode-5678,enterthefollowing:
4newRe-enter
1Re-enter
LockingandUnlocking
Changing Programming Code
AddingUserCodes
ID
ID
ID
UC UC
UC UC
UC
PC
PC
PC PC
PC
PC
PC
Page9
DELETE ONE EXISTING OR PRESET USER CODE
TheunitcomeswithafactoryUserID=01forUserCode=1234.
IMPORTANT:Todelete1UserCode,thelockmusthavemorethan1UserCode
in its database.
SET OR CANCEL AUTO LOCK
Youcansetthelocktoautomaticallycloseaftereachtimethelockisopened.Time
valuerange=20-900seconds,enterthefollowing:
DELETE ALL USER CODES
IMPORTANT:thiswilldeletetheusercodesbutnottheprogrammingcode,enter
thefollowing.
Hear 1 beep and Light Indicator illuminates green.
SetAutoLock:
Hear 1 beep and Light Indicator illuminates green.
To cancel Auto Lock set the time to 00, enter the following:
CancelTimeValueAutoLock:
Hear 1 beep and Light Indicator illuminates green.
Hear 1 beep and Light Indicator illuminates green.
2Existing re-enter
5TimeValue
500
3re-enter
DeletingUserCodes
AutomaticLockFunction
PC
PC
PC
PC PC
ID
UC
UC
UC
ID ID
DISABLE:
WhileinAuto-Lockmode,unlockdoorusing,within10secondsyoumustturnthe
lockingknobbyhandtothelockedposition,waitmorethan2secondsthenturnthe
lockingknobbacktotheunlockposition.TheAuto-Lockmodeisnowdisabled.
RESTORE:
TorestoretheAuto-Lockfuntion,youcanturnthelockingknobbyhandtothelocked
position,waitmorethan2secondsorpressthe
Lock button on the keypad.
TemporarilyDisableAuto-Lock
PC
Page 10
NOTE: If you only press the for more than 3 seconds but
do not input
PC
, the system will remain in Vacation Mode.
WarningsoundsandLEDashesredafter4incorrectcodeattempts:Keypadshuts
downfor30seconds.
To reset the lock to the original factory settings including the Programming Code
andallUserCodesremoveonebatteryfor10seconds.Reinsertthebatteryand
waitforalongandshortbeep.Press3timeswithin3seconds.Thelockwillbeep
andthelightindicatorwillturngreen.
BeepsandLEDashesredfor5seconds.Replacewithgoodqualityalkalinebatteries.
Note:RemovingbatteriesdoesnoteraseactiveProgrammingorUserCodes.
WithVacationModeenabled,thesystementersintolow-powercomsumptionmode.
Duringthismode,allbuttonsandfunctionsincludingtheremotecontrollwillbeinvalid
untiltheyarere-enabled(seestepsbelow).
ENABLE:
DISABLE:
TodisabletheVacationMode,youmustpressandholdformorethan3seconds,
theninputtounlockthedoor.VacationModeisnowdisabled.
SecureLock-outPeriod
RestoreFactorySettings
LowBatteryWarning
VacationMode
UC
PC
Hear 1 beep and Light Indicator illuminates green then lock door
10 1
PC
PC
Youcan“mute”orturnthe“soundon”onyourlockbyenteringthefollowing.
(Factorysettingissoundon).
SoundO(1)-LightIndicatorilluminatesgreen.
SoundOn(2)-Hear1beepandLightIndicatorilluminatesgreen.
61or2
SoundOnandO
PC
1=SoundO
2=SoundOn
Page 11
NOTE:Whenbatteryisunderlowvoltage,thelockwillgivethe(LowBatteryWarning:Beepsand
LEDashesredfor5seconds).Duringthistimeyourlockcanstillwork.Howeveroncethevoltage
islowerthan4.3V(calledSuper-LowVoltage),theoperationofthelockingandunlockingwillnot
work,usermustreplacebatteriesimmediately.
Unlock/Validprogramming: 1longbeepandLEDilluminatesgreen
Lock: 2shortbeepsandLEDilluminatesred
InvalidProgramming: 2shortbeepsandLEDashesredtwice
LowVoltage: Beepsfor5seconds
(7/9timesdependsonoperationisunlock/lock)
SuperLowVoltage: 4shortbeepsandLEDashesredfourtimes
4Incorrectcodeentryattempts: 2shortbeepsandLEDilluminatesredeachattempt
Poweron: 1longbeepand1shortbeepandLEDilluminatesgreen
ChipReset: 1longbeepand1shortbeepandLEDilluminatesgreen
(mayoccurseveraltimesoronceinawhile)
LockError: 3longbeepsLEDashesredthreetimes
RepeatoperationafterLockError: 2shortbeepsthreetimesLEDashesredsixtimes
CONSUMERFRIENDLYMESSAGEGUIDE
INSTALLATIONTROUBLESHOOTING
Issue Solution
Lockwillnotfunction
electronically
• Check that all batteries are fresh high quality
Alkaline Batteries
• Check for proper polarity (+ -) of all batteries
• Check that the Control Wire is attached to the
Interior Assembly
Latch is sticking.
Installation screws of the lock may be too tight and have to be
loosened
• Remove Interior Assembly
• Slightly loosen the Mounting Plate Screws
• Lock and unlock using the Key
• Reattach Control Wire and Interior Assembly
NOTE: If you only press the for more than 3 seconds but
do not input
PC
, the system will remain in Vacation Mode.
Page 12
WEBSITE:www.honeywellsafes.com
ADDRESS:ConsumerAssistanceDept.
LHLicensedProducts,Inc.,860EastSandhillAvenueCarson,CA90746USA
TELEPHONE:US/Canada1-800-860-1677Ext.1801(TollFree)
Mexico01-800-288-2872AfterEnglishvoicerecordingstopsyoumustthenenter800-
860-1677tocompleteyourcall.(TollFree)
Australia0011-800-5325-7000(TollFree)
Germany/NewZealand00-800-5325-7000(TollFree)
OtherCountriesXX*-310-323-5722(TollChargesApply)
XX*-DialU.S.CountryCoderst
CALLCENTERHOURS:US/Canada8am–5pm(Pacic**)Mon–Fri
(Subjecttochange)
CALLBACKHOURS:OtherCountries8am–5pm(Pacic**)Mon–Fri
(Subjecttochange)
*InsertcorrectCountryCode
**LocalTimebasedonLosAngelesCaliforniaUSA
INTERNATIONALCALLBACKHOURS:
IfyouneedtospeakwithaconsumerassistantandcannotcontactusduringtheCall
Centerhoursabove,pleasesendanemailorleaveatelephonemessage,includingyour
Name,TelephoneNumberandthebesttimeforustocontactyouduringtheCallBack
hoursaboveandwewillmakeoureveryeorttocontactyouandhelpansweranyof
your questions or concerns.
CONSUMERASSISTANCE
Page15
2-3/8” (60mm) BACKSET
2-3/4” (70mm) BACKSET
THENDRILL1”(25mm)HOLE
INCENTERDOOROFEDGE
2”(50mm)INDEPTH
MARK
FOR1-3/4”
(45mm)
DOOR
DRILL
2-1/8”(54mm)
HOLE
MARK
FOR1-3/8”
(35mm)
DOOR
IMPORTANT!
PLACETEMPLATE
ONHIGHEDGEOF
DOORBEVEL
PLACETOP
36”(915mm)
ABOVEFLOOR
Page16
BACK OF
TEMPLATE
Page 17
Limited Lifetime Mechanical and Finish Warranty / 1 Year Limited Electronics Warranty
Thisproductcomeswithalimitedlifetimemechanicalandnishwarrantyandaoneyearlimited
electronicswarrantytotheoriginalresidentialconsumeragainstdefectsinmaterialand
workmanshipundernormaluseaslongastheoriginalresidentialpurchaseroccupiesthe
residentialpremisesuponwhichtheproductwasoriginallyinstalled.
ORIGINALRESIDENTIALCONSUMER
Thiswarrantyisnottransferable,andappliestotheoriginalpurchaseronly,aslongastheoriginal
purchaseroccupiestheresidentialpremisesuponwhichtheproduct(s)wasoriginallyinstalled.
Proofofpurchase(originalsalesreceipt)andownershipmustaccompanyallwarrantyclaims.
Allnon-homeownerpurchasers(includingpurchasersforindustrial,commercialandbusinessuse)
arenotcoveredunderthetermsofthiswarranty.
WHATISNOTCOVERED
Thiswarrantyisnullandvoidiftheproductwasusedforpurposesforwhichitwasnotdesigned.
ThiswarrantyDOESNOTCOVERnormalwearandtearofpartsordamageresultingfromanyof
thefollowing:negligentuse,misuseorabuseoftheproduct,orusecontrarytoorinviolationof
writteninstructionsprovidedbyLHLicensedProducts,Inc.Further,thiswarrantydoesnotcover
ActsofGod,suchasre,ood,hurricanesandtornadoes.ThiswarrantyDOESNOTCOVER
scratches,abrasions,deteriorationduetotheuseofpaints,solventsoruseofcleaners
containingabrasives,alcoholorothersolvents,whetherperformedbyacontractor,service
company,oryourself.ThiswarrantyDOESNOTCOVERproduct(s)usedincommercial
applications, used in common area applications, disassembly, repair or alteration by anyone other
than LH Licensed Products, Inc., improper installation or exposure to extremes of heat or humidity.
ThiswarrantyDOESNOTCOVERanylosses,injuriestopersonsorlossofproperty,general
damagesorcosts,andshippingandfreightexpensesrequiredtoreturnproduct(s)to
LH Licensed Products, Inc. LH Licensed Products, Inc. shall not be liable for any indirect,
incidental or consequential damages of any nature relating to this lock. LH Licensed Products, Inc.
isalsonotresponsibleforcostsassociatedwithremovingorreinstallingtheproduct.
ADDITIONALTERMS
LH Licensed Products, Inc. does not authorize any person to create for it any obligation or
liabilityinconnectionwiththeProduct.LHLicensedProducts,Inc.’smaximumliabilityhere
under is limited to the original purchase price of the Product. No action arising out of any claimed
breachofthiswarrantybyLHLicensedProducts,Inc.maybebroughtbytheoriginalresidential
purchasermorethanone(1)yearafterthecauseofactionhasarisen.
Page 18
TheHoneywellTrademarkisusedunderlicensefromHoneywellInternationalInc.Honeywell
InternationalInc.makesnorepresentationsorwarrantieswithrespecttothisproduct.
www.honeywellsafes.com
Manufacturedby:
LH Licensed Products, Inc.
860EastSandhillAvenue
Carson,CA90746
Page35
THENDRILL1”(25mm)HOLE
INCENTERDOOROFEDGE
2”(50mm)INDEPTH
MARK
FOR1-3/4”
(45mm)
DOOR
DRILL
2-1/8”(54mm)
HOLE
MARK
FOR1-3/8”
(35mm)
DOOR
IMPORTANT!
PLACETEMPLATE
ONHIGHEDGEOF
DOORBEVEL
DU MODÈLE
Distance d'entrée de 2-3/8 po (60MM)
Distance d'entrée de 2-3/4 po (70MM)
PLIEZ ICI SUR LE
BORD DE LA PORTE
MARQUEPOUR
UNEPORTEDE
1-3/4po(45MM)
MARQUEPOUR
UNEPORTEDE
1-3/8po(35MM)
PUISPERCERUNTROU
DE1PO(25MM)TENIRAU
CENTREDELAPORTEÀ2
PO(50MM)DEPROFONDEUR
POURL’INSTALLATIONDELA
SERRURED’ENTRÉEETDES
PÊNESDORMANTS
IMPORTANT:PLACEZ
LEMODÈLESURLE
BORDÉLEVEZDU
BISEAUDELAPORTE
MARQUEZLE
CENTREDUTROU
SURLEDEVANT
DELAPORTE
PLACEZAU
DESSUSÀ36
PO(915MM)
DUSOL
PERCEZUN
TROUDE
2-1/8PO
(54MM)
Page55
THENDRILL1”(25mm)HOLE
INCENTERDOOROFEDGE
2”(50mm)INDEPTH
MARK
FOR1-3/4”
(45mm)
DOOR
DRILL
2-1/8”(54mm)
HOLE
MARK
FOR1-3/8”
(35mm)
DOOR
IMPORTANT!
PLACETEMPLATE
ONHIGHEDGEOF
DOORBEVEL
PLANTILLA
ENTRADA DE CERRADURA DE 2-3/8” (60MM)
ENTRADA DE CERRADURA DE 2-3/4” (70MM)
DOBLE AQUÍ EN EL
BORDE DE LA PUERTA
MARCA
PARAPUERTA
DE13/4”
(45MM)
MARCA
PARAPUERTA
DE13/8”
(35MM)
LUEGOPERFOREUN
AGUJERODE1”(25MM)EN
ELCENTRODELBORDEDE
LAPUERTA,2”(50MM)EN
PROFUNDIDAD
PARAINSTALACIÓNDE
CERRADURASDEENTRADA
YDESEGURIDAD
¡IMPORTANTE!COLOQUE
LAPLANTILLAENEL
BORDESUPERIORDEL
NIVELDELAPUERTA
MARQUEELCENTRO
DELAGUJEROENLA
CARADELAPUERTA
COLOQUELA
PARTESUPERIOR
DE36”(915MM)
ENCIMADELA
PUERTA
PERFOREUN
AGUJERODE
2-1/8”(54mm)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Honeywell 8732101 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI