2. Toro
  3. ROPS Conversion Kit, TITAN Zero-Turn-Radius Riding Mower

Toro ROPS Conversion Kit, TITAN Zero-Turn-Radius Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro ROPS Conversion Kit, TITAN Zero-Turn-Radius Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3383-520RevA
ROPSConversionKit
TITAN
®
Zero-Turn-RadiusRidingMower
ModelNo.130-6850
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Pivotbracket4
Rubberbumper2
Spacer
4
Roundspacer2
Pinassembly2
Nut(5/16inch)
2
InstalltheROPSParts
InstallingtheROPSParts
1.RemovetheexistingsidebracketsontheROPS.Save
thenutsandboltsforinstallingthenewbrackets.
2.Installtherubberbumperstothelowerpartofthe
ROPSwith2nuts(5/16inch)(Figure1).
3.Installthepivotbracketsandspacerstotheupperpart
oftheROPSwiththepreviouslyremovednutsand
bolts(
Figure1).
4.InstalltheupperpartoftheROPS,roundspacer,and
pinassemblytothelowerpartoftheROPSwiththe
previouslyremovednutsandbolts(Figure1).
5.Torqueallnutsandboltsto40.7to49.7N-m(360to
440in-lb).
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3383-520*A
Figure1
1.UpperpartoftheROPS
5.Washer
9.LowerpartoftheROPS
2.Rubberbumper6.Bolt
10.Nut(5/16inch)
3.Spacer
7.Roundspacer
4.Pivotbracket8.Pinassembly
2
Operation
UsingtheRolloverProtection
System(ROPS)
WARNING
Toavoidinjuryordeathfromrollover:keepthe
rollbarintheraisedlockedpositionandusethe
seatbelt.
WARNING
Thereisnorolloverprotectionwhentherollbaris
inthedownposition.
•Lowertherollbaronlywhenabsolutely
necessary.
•Donotweartheseatbeltwhentherollbaris
inthedownposition.
•Driveslowlyandcarefully.
•Raisetherollbarassoonasclearancepermits.
•Checkcarefullyforoverheadclearances(i.e.
branches,doorways,electricalwires)before
drivingunderanyobjectsanddonotcontact
them.
Important:Lowertherollbaronlywhenabsolutely
necessary.
1.Toraisetherollbar,removethehaircotterpinand
removethelockingpins.
2.Raisetherollbartotheuprightposition(
Figure2).
G015034
Figure2
Important:Alwaysusetheseatbeltwiththeroll
barintheraisedposition.
3.Installthelockingpins.Securethepinsbyinstallingthe
haircotterpin(Figure3).
G015035
1
2
3
2
Figure3
1.HoleinROPS
3.Hairpincotter
2.Lockingpin
4.Tolowertherollbar,removethehaircotterpinand
removethelockingpin(Figure3).
5.Lowertherollbartothedownposition.
6.Usethe2lockingandcotterpinstosecurethebar.
3
/