2. TMI Products
  3. 64-72 Mustang Short Console

TMI Products 64-72 Mustang Short Console Installation guide

  • Hello! I am an AI chatbot trained to assist you with the TMI Products 64-72 Mustang Short Console Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1. Carefully place and push the Console Caddy onto the stock console from the rear. Determine the
location which is most comfortable for you. Mark this location on the stock console with a piece of
tape.
2. Remove the p rotective strip from the back of each self adhesive velcro strip and attach the strips
approximately in the positions shown but not beyond the tape marks you made is step one. Place the
Console Caddy on the stock console and be sure the velcro strip hooks engage the carpet on the
underside of the Console Caddy.
Use Masking Tape
to Mark Location of
Console
Peel Off
Protective
Backing and
Place Behind
Tape Mark
99-9142-000
1. Carefully place and push the Console Caddy onto the stock console from the rear. Determine the
location which is most comfortable for you. Mark this location on the stock console with a piece of
tape.
2. Remove the protective strip from the back of each self adhesive velcro strip and attach the strips
approximately in the p ositions shown but not beyond the tape marks you made is step one. Place the
Console Caddy on the stock console and be sure the velcro strip hooks engage the carpet on the
underside of the Console Caddy.
Use Masking Tape
to Mark Location of
Console
Peel Off
Protective
Backing and
Place Behind
Tape Mark
99-9142-000
/