TOOLS REQUIRED
CAUTION
Wire
strippers
Ladder Safety
glasses
Electrical
tape
Phillips
screwdriver
PliersFlat blade
screwdriver
• Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have
resulted during shipping. If there is a defect in
the wire, do not attempt installation.
• Before starting installation of this fixture or
removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by
removing the fuse at the fuse box.
Fixture
Fixture
Mounting Unit
Mounting Unit
Mounting
Mounting
Screws
Screws Wire Nuts
Wire Nuts
Chain
Chain
Canopy
Canopy
Screw Collar
Ring
Screw Collar
Ring
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
Assembly Instructions
STEP 1
Attach the iron rack onto fixture using ball nuts.
HARDWARE INCLUDED
INSTALLATION
Iron Rack
Iron Rack
Ball Nuts
Ball Nuts
STEP 2
Attach the end of the chain to the loop
on the fixture.
STEP 3
Use the mounting screws to attach
the mounting unit to the junction box.
Bulbs
(not included)
EXPLODED PARTS