Altronix ALTV615DCUL is a power supply designed for CCTV systems, providing reliable power distribution to security cameras, heaters, and other video accessories. It offers 16 individual outputs with adjustable voltage ranging from 6VDC to 15VDC, allowing for customized power delivery to connected devices. Each output is protected by either fuses or PTCs (auto-resettable), ensuring continuous operation even in case of overcurrent or short circuit conditions.
Altronix ALTV615DCUL is a power supply designed for CCTV systems, providing reliable power distribution to security cameras, heaters, and other video accessories. It offers 16 individual outputs with adjustable voltage ranging from 6VDC to 15VDC, allowing for customized power delivery to connected devices. Each output is protected by either fuses or PTCs (auto-resettable), ensuring continuous operation even in case of overcurrent or short circuit conditions.
ALTV615DC416UL
- 6-15VDC @ 4A
- Sixteen (16) fuse protected outputs
ALTV615DC616UL
- 6-15VDC @ 6A
- Sixteen (16) fuse protected outputs
ALTV615DC416ULCB
- 6-15VDC @ 4A
- Sixteen (16) PTC protected outputs
ALTV615DC616ULCB
- 6-15VDC @ 6A
- Sixteen (16) PTC protected outputs
ALTV615DCUL Series
CCTV Power Supplies
Models Include:
Rev. 050404 More than just power.TM
Installing Company: _______________ Service Rep. Name: __________________________________
Address: _____________________________________________ Phone #: __________________
Installation Guide
For models with the factory installed 3-wire line cord
add suffix “3”, e.g. ALTV615DC616UL3
- 2 - ALTV615DCUL Series Installation Guide
CAUTION: This installation should be made by qualified service personnel and should conform
to the National Electrical Code and all local codes.
Installation Instructions:
1. Mount unit in the desired location.
2. Connect AC power to the two black and two white flying leads of the transformer (Fig. 1, pg. 3).
Units with line cord installed skip Step 2.
Use 18 AWG or larger for all power connections. Connect green ground lead to earth ground (Fig. 1, pg. 3).
Keep power-limited wiring separate from non power-limited wiring.
Minimum 0.25” spacing must be provided. Use separate knockouts.
3. Adjust output voltage (unit is factory set at 12VDC): use the trimpot on the power supply board
prior to connecting CCTV devices (Fig. 1a, pg. 3).
4. Measure output voltage before connecting devices. This helps avoiding potential damage.
CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting
the output voltage.
5. Connect devices to the terminals marked [1P - 1N] through [16P - 16N] on PD16W/PD16WCB board,
carefully observing correct polarity (Fig. 1, pg. 3).
Terminals marked [1P - 16P] are positive (+) and terminals marked [1N - 16N] are negative (–).
6. Green LED will illuminate when unit is powered.
7. Upon completion of wiring secure enclosure door with screws (supplied).
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
Agency Listings:
• UL Listed for Commercial CCTV Equipment
(UL 2044).
CUL Listed - CSA Standard C22.2 No.1-98,
Audio, Video and Similar Equipment.
Input:
• Input 115VAC, 50/60Hz.
Output:
• Sixteen (16) individual outputs.
• 6VDC to 15VDC field adjustable.
• Outputs are rated @ 3.5A (fused) or 2.5A (PTC).
• Filtered and electronically regulated outputs.
Features:
• AC input and DC output LED indicators.
• Power ON/OFF switch.
• Unit maintains camera synchronization.
• Ease of installation saves time and eliminates
costly labor.
Enclosure Dimensions (H x W x D approx.):
13.5” x 13” x 3.25”
(342.9mm x 330.2mm x 82.6mm).
Overview:
ALTV615DCUL Series DC CCTV Power Supplies provide 6 - 15VDC distributed via fuse or PTC protected outputs
for powering CCTV cameras, heaters, and other video accessories.
ALTV615DCUL Series Reference Chart:
Altronix
Model Number
115VAC 50/60Hz
Input Current
Output Voltage
Total Output
Current (Power)
Number of
Outputs
Output Current
(max per output)
Fuse Protected
Outputs
PTC Protected
Outputs
(auto-resettable)
Class 2 Rated
Power-Limited
ALTV615DC416UL 0.9A 6 - 15VDC 4A 16 3.5A P–P
ALTV615DC416ULCB 0.9A 6 - 15VDC 4A 16 2.5A – P P
ALTV615DC616UL 1.5A 6 - 15VDC 6A 16 3.5A P– –
ALTV615DC616ULCB 1.5A 6 - 15VDC 6A 16 2.5A – P P
Specifications:
ALTV615DCUL Series Installation Guide - 3 -
Terminal Identification:
Power Supply Board
Terminal Legend Function/Description
AC/AC Low voltage AC input.
+ DC – 6VDC -15VDC output.
PD16W/PD16WCB - Distribution Module
1P - 16P Positive DC outputs.
1N - 16N Negative DC outputs.
Door
CAUTION: De-energize unit prior to servicing. For continued protection against fire hazard
replace fuse with the same type and rating: 3.5A, 250V. Do not expose unit to rain or moisture.
3.5A 250V
For continuous protection against
risk of fire replace fuses with
same type and rating.
common
outputs
protected
outputs
P
N
NPS
XFMR Input
PD16W
12345678
9 10 11 12 13 14 15 16
NP
Wire Strap
(from
Enclosure
to Door)
non
power-
limited
XFMR XFMR
Black Lead
White Lead
Input
115VAC
50/60Hz
Power Supply
Board
Trimpot
P
N
PTCs
NPS
XFMR Input
PD16WCB
common
outputs
protected
outputs
12345678
9 10 11 12 13 14 15 16
PN
DC outputs
Green
Lead
(ground)
Power Switch
Used on PTC Models
(example: ALTV615DC416ULCB)
Power-Limited
Class 2
DC outputs
Fig. 1
Fig. 1a
- 4 - ALTV615DCUL Series Installation Guide
Enclosure Dimensions (H x W x D approximate):
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm)
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of
sufficient magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: To reduce the risk of electric shock do not open enclosure.
There are no user serviceable parts inside.
Refer servicing to qualified service personnel.
1.40”
(35.6mm)
1.40”
(35.6mm)
1.40”
(35.6mm)
4.85” (123.2mm) 4.85” (123.2mm)
3.25” (82.6mm)
0.75”
(19.1mm)
0.75”
(19.1mm)
11.0” (279.4mm)
12.5” (317.5mm)
1.20”
(30.5mm)
1.20”
(30.5mm)
0.9375” (23.8mm)
0.9375” (23.8mm)
5.10” (129.5mm)
1.40”
(35.6mm)
5.10” (129.5mm)
6.5625” (166.7mm)
3.25” (82.6mm)3.25” (82.6mm)
3.25” (82.6mm)
10.5” (266.7mm)
1.0”
(25.4mm)
1.0”
(25.4mm)
1.0” (25.4mm)
13.0” (330.2mm)
5.10” (129.5mm)
1.20”
(30.5mm)
Altronix is not responsible for any typographical errors.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty
IIALTV615DCULSeries K16U MEMBER
-
1
-
2
-
3
-
4
Altronix ALTV615DCUL is a power supply designed for CCTV systems, providing reliable power distribution to security cameras, heaters, and other video accessories. It offers 16 individual outputs with adjustable voltage ranging from 6VDC to 15VDC, allowing for customized power delivery to connected devices. Each output is protected by either fuses or PTCs (auto-resettable), ensuring continuous operation even in case of overcurrent or short circuit conditions.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Altronix ALTV615DC1016 Series CCTV Power Supplies User manual
-
-
Altronix ALTV615DC8UL Operating instructions
-
-
-
Altronix LPS5C24X220 Owner's manual
-
Altronix ALTV1224C4 Installation guide
-
-
-
Altronix eFlow104NV Installation guide
