Altronix ALTV615DC1016 Series CCTV Power Supplies User manual

Brand: Altronix

Model: ALTV615DC1016 Series CCTV Power Supplies

Type: User manual

Rev. 102804 More than just power.TM

Installing Company: _______________ Service Rep. Name: __________________________________

Address: _____________________________________________ Phone #: __________________

Installation Guide

ALTV615DC1016 Series

CCTV Power Supplies

Models Include:

ALTV615DC1016

- 6-15VDC @ 10A

- Sixteen (16) Fuse Protected Outputs.

ALTV615DC1016CB

- 6-15VDC @ 10A

- Sixteen (16) PTC Protected Outputs.

For models with the line cord installed add suffix “3”, e.g. ALTV615DC10163

- 2 - ALTV615DC1016 Series Installation Guide

Overview:

ALTV615DC1016 Series DC CCTV Power Supplies provide 6-15VDC distributed via sixteen (16) fuse or PTC

protected outputs for powering CCTV cameras, heaters, and other video accessories.

Sixteen (16) Output ALTV615DC1016 Reference Chart:

Altronix

Model Number

Total

Output

Current

(Power)

Output

Voltage

Number

Outputs

PTC

Protected

Outputs

(auto-

resettable)

Fuse

Protected

Outputs

Output

Current

(max. per

output)

115VAC

50/60Hz

Input

Current

ALTV615DC1016 10A 6-15VDC 16 – P3.5A 1.9A

ALTV615DC1016CB 10A 6-15VDC 16 P– 2.5A 1.9A

Specifications:

Input:

• Input 115VAC, 50/60 Hz, 1.9A.

Output:

• Sixteen (16) fuse or PTC protected outputs.

• 6VDC to 15VDC field adjustable.

• 10A total continuous supply current.

• Filtered and electronically regulated outputs.

Features:

• AC input and DC output LED indicators.

• Illuminated power disconnect circuit breaker

with manual reset.

• Unit maintains camera synchronization.

• Ease of installation saves time and eliminates

costly labor.

Enclosure Dimensions (H x W x D approx.):

13.5” x 13” x 3.25”

(342.9mm x 330.2mm x 82.6mm)

Installation Instructions:

1. Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top two keyholes

in the enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place

the enclosure’s upper keyholes over the two upper screws; level and secure. Mark the position of the lower

two holes. Remove the enclosure. Drill the lower holes and install the two fasteners. Place the enclosure’s

upper keyholes over the two upper screws. Install the two lower screws and make sure to tighten all screws

(Enclosure Dimensions, pg. 4). Secure enclosure to earth ground.

2. Connect AC power to the two black and two white flying leads of the transformer (Fig. 1, pg. 3).

Units with line cord installed skip Step #2.

3. Plug the line cord into a grounded AC receptacle (Fig. 1b, pg. 3).

4. Adjust output voltage (unit is factory set at 12VDC): use the trimpot on the power supply board

prior to connecting CCTV devices (Fig. 1a, pg. 3).

5. Measure output voltage before connecting devices. This helps avoiding potential damage.

Terminals marked [1P - 16P] are positive (+) and terminals marked [1N - 16N] are negative (–).

CAUTION: Determine the maximum operating voltage of the equipment being powered before

adjusting the output voltage.

6. Connect devices to terminals marked [1P - 1N] through [16P - 16N] on PD16W/PD16WCB board

(Fig. 1, pg. 3), carefully observing correct polarity.

7. Green LED will illuminate when unit is powered.

8. Upon completion of the wiring, secure enclosure door with screws (supplied).

Caution: Equipment must be installed/serviced by authorized/trained personnel only.

Shut branch circuit power before installing/servicing equipment.

WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or

moisture. This installation should be made by qualified service personnel and should

conform to the National Electrical Code and all local codes.

ALTV615DC1016 Series Installation Guide - 3 -

Terminal Identification:

Power Supply Board

Terminal Legend Function/Description

AC / AC Low volage AC input.

+ DC –6VDC-15VDC output.

PD16W - Distribution Module

Terminal Legend Function/Description

1P - 16P Positive DC output.

1N - 16N Negative DC output.

Door

CAUTION: De-energize unit prior to servicing. For continued protection against fire hazard

replace fuse with the same type and rating 3.5A, 250V. Do not expose unit to rain or moisture.

3.5A 250V

For continuous protection against

risk of fire replace fuses with

same type and rating.

common

outputs

protected

outputs

NPS

XFMR Input

PD16W

12345678

9 10 11 12 13 14 15 16

Wire Strap

(from

Enclosure

to Door)

non-

power

limited

XFMR XFMR

Black Lead

White Lead

For models with

factory installed

3-wire line cord

115VAC input

50/60 Hz

Power Supply

Board

Used on PTC Models

(example:

ALTV615DC1016CB)

PTCs

NPS

XFMR Input

PD16W

common

outputs

protected

outputs

12345678

9 10 11 12 13 14 15 16

DC outputs

Green

Lead

(ground)

Power Switch

Trimpot

Fig. 1

Fig. 1a

Fig. 1b

- 4 - ALTV615DC1016 Series Installation Guide

1.40”

(35.6mm)

1.40”

(35.6mm)

1.40”

(35.6mm)

4.85” (123.2mm) 4.85” (123.2mm)

3.25” (82.6mm)

0.75”

(19.1mm)

0.75”

(19.1mm)

11.0” (279.4mm)

12.5” (317.5mm)

1.20”

(30.5mm)

1.20”

(30.5mm)

0.9375” (23.8mm)

5.10” (129.5mm)

1.40”

(35.6mm)

5.10” (129.5mm)

6.5625” (166.7mm)

3.25” (82.6mm)3.25” (82.6mm)

3.25” (82.6mm)

10.5” (266.7mm)

1.0”

(25.4mm)

1.0”

(25.4mm)

1.0” (25.4mm)

13.0” (330.2mm)

5.10” (129.5mm)

1.20”

(30.5mm)

Enclosure Dimensions (H x W x D approximate):

13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm)

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user

to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of

sufficient magnitude to constitute an electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of impor-

tant operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION: To reduce the risk of electric shock do not open enclosure.

There are no user serviceable parts inside.

Refer servicing to qualified service personnel.

Altronix is not responsible for any typographical errors.

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056

website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty

IIALTV615DC1016 Series L07U MEMBER

Altronix ALTV615DC1016 Series CCTV Power Supplies User manual

Altronix ALTV615DC1016 Series CCTV Power Supplies User manual

Altronix ALTV615DC1016 Series CCTV Power Supplies User manual

Related papers

Other documents