MX2300 Series

Hobo MX2300 Series Operating instructions

  • Hello! I've reviewed the user manual for the HOBO MX2300 Series Solar Radiation Shield Bracket and related loggers. This document explains how to attach the bracket to the underside of a solar radiation shield. I am ready to answer your questions based on the information in the manual.
  • What models is this bracket compatible with?
    Where on the solar radiation shield should the bracket be attached?
    What is used to attach the logger and bracket?
HOBO® MX2300 Series Solar Radiation
Shield Bracket (MX2300-RS-BRACKET)
For use with MX2301 and MX2305 models
Using the closed plate second from the top of the solar radiation
shield (RS1 or M-RSA), attach the logger and bracket to the
underside of the plate with the small screws included as shown
below.
For details on the solar radiation shield, refer to the
Solar Radiation Shield Installation Guide at
www.onsetcomp.com/resources/documentation/4115-
man-rs1 or scan the code at the left.
© 2016–2023 Onset Computer Corporation. All rights reserved. Onset and HOBO are
registered trademarks or trademarks of Onset Computer Corporation. All other
trademarks are the property of their respective companies.
U.S. and International Sales: 1-508-759-9500 • www.onsetcomp.com/support/contact
20938-C MAN-MX2300-RS-BRACKET
/