Page is loading ...
NA-SAV3
|
User Manual
www.noctua.at
C = case side F = fan side
Closed corner fanOpen corner fan
The NA-AV3 mounts
feature five defined,
numbered pawls for
standard open corner
fans (pawl 1) and 10,
14, 15, 20 or 25mm
thick fans with closed
corners (pawls 2 to 5).
First pull the F side through the fan’s mounting holes until
the appropriate pawl is all the way through the hole.
NA-SAV3
|
User Manual
www.noctua.at
PAWL 2
for 10mm thick closed corner fans
PAWL 1
for open corner fans
PAWL 3
for 14/15mm thick closed corner fans
PAWL 4
for 20mm thick closed corner fans
PAWL 5
for 25mm thick closed corner fans
If the long ends of the mounts are in the way, you can use scissors
to cut them after installation. Note that this will then make them
difficult to reinstall in the future.
Then pull the C side through the mounting holes of the
case.
Caution: Only pull the appropriate pawl through the hole. Don’t
overstretch the mounts by pulling the next pawl through!
1
2
10mm
14/15mm
20mm
25mm
/
