Noctua NA-SAV4 Installation guide

Type
Installation guide
NA-SAV4
|
User Manual
www.noctua.at
F = fan side
Closed corner fanOpen corner fan
The NA-AV4 mounts
feature five defined,
numbered pawls for
standard open corner
fans (pawl 1) and 10,
14, 15, 20 or 25mm
thick fans with closed
corners (pawls 2 to 5).
First pull the NA-AV4 through the mounting holes of the
case.
NA-SAV4
|
User Manual
www.noctua.at
PAWL 2
for 10mm thick closed corner fans
PAWL 1
for open corner fans
PAWL 3
for 14/15mm thick closed corner fans
PAWL 4
for 20mm thick closed corner fans
Caution: Only pull the appropriate pawl through the hole. Don’t
overstretch the mounts by pulling the next pawl through!
Then pull the tip through the fan’s mounting holes until the
appropriate pawl is all the way through the hole.
1
2
10mm
14/15mm
20mm
PAWL 5
for 25mm thick closed corner fans
25mm
  • Page 1 1
  • Page 2 2

Noctua NA-SAV4 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI