English
-1-
I
mportant Notice:
Please install the driver first and then
connect VideoCAM Slim USB2 to the USB
port.
Please read the important notice before the installation.
1. Installing VideoCAM Slim USB2 software
a. Insert the VideoCAM Slim USB2 software CD into CD-ROM drive.
b. After few seconds, the setup screen will show the picture of
VideoCAM Slim USB2. Click the “Utility Driver” then simply
follow the on-screen instructions.
c. Please remember to install DirectX of the CD-ROM.
Notice:
If the setup screen doesn’t show the picture of VideoCAM Slim
USB2, please precede the following installation:
z Go to the taskbar and click Start then Execute.
z Type D：\SETUP.EXE , then click Enter key.
(Suppose your CD-ROM is in Drive D)
2. Connect the VideoCAM Slim USB2 to
your computer.
Connect the VideoCAM Slim USB2 to the
USB port as shown on the right drawing.
3. To get rid of driver installation, please
go to the taskbar and follow “Start Æ
Program Æ VideoCAM Slim USB2 Æ
VideoCAM Slim USB2 Uninstall, then follow the on-screen
instruction to remove the installation.
USB Port
4. You can install the recognize software for video conferencing
or chat with your friends.
English
-2-
You can use snapshot button to capture still
image or rotate the lens cover to adjust the
focus.
5. Function description for the major icon
A.
Play the .avi file.
B. Preview the video image.
C. Take a picture.
D. Capture image with full motion video.
E. Send photo through e-mail.
English
-3-
F. Use PC camera as a security monitoring system.
G. Exit the Genius VideoCAM Series UI.
H. Convert AVI files into MPEG-1 format
NOTE
Make sure to install the USB driver before connecting the device otherwise
unable to install properly. If you encounter problems, uninstall the driver and
software then follow the proper installation.
Should you need the device under high luminance environment, please follow
the steps as below:
Camera Control Æ Control Æ Exposure
6. Function description for the security monitoring system icon.
You can record any movements that appear in front of your monitor
automatically. It can also record anytime until the HD is full. If there’s no
English
-4-
movement, it will shut down automatically after four seconds or until there
is new movement. It’s a great security monitoring system and you can set
the software so it works at times when you’re not around.
A.
Setup time of the security monitoring system.
When you start to record video, please press the play
button.
NOTE
The recording file will be retained in C:\WINDOWS\Album.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Genius NB Owner's manual
-
-
-
-
-
-
-
-
-
Genius VIDEOCAM MESSENGER Installation guide
Other documents
-
Panasonic SDR-S15P User manual
-
Panasonic sdr s15 sd camcorder black User manual
-
Panasonic SDRSW21 Operating instructions
-
-
Panasonic SDRS70EP Operating instructions
-
Panasonic SDRS45 Operating instructions
-
Philips SDR-S50 User manual
-
-
-