English
1
USB Port
I
mportant Notice:
Please install the driver first and then
onnect VideoCAM NB 300 to the USB
ort.
c
p
Please read the important notice before the installation.
1. Installing VideoCAM NB 300 software
A. Insert the VideoCAM NB 300 software CD into CD-ROM drive.
B. After few seconds, the setup screen will show the picture of
VideoCAM NB 300. Click the “Utility Driver” then simply follow
the on-screen instructions.
C. Please remember to install DirectX of the CD-ROM.
Notice:
If the setup screen doesn’t show the picture of VideoCAM NB
300, please proceed the following installation:
z Go to the taskbar and click Start then Execute.
z Type D：\SETUP.EXE , then click Enter
key.
(Suppose your CD-ROM is in Drive D)
2. Connect the VideoCAM NB 300 to your
computer.
Connect the VideoCAM NB 300 to the USB port as
shown on the right drawing.
3. To get rid of driver installation, please go to t
follow “Start Æ Program Æ VideoCAM NB 300 Æ
VideoCAM NB 300 Uninstall, then follow the on-screen
instruction to remove the installation.
he taskbar and
4. You can install the recognize software for video conferencing
or chat with your friends.
English
2
You can use snapshot button to capture
still image or rotate the lens cover to
adjust the focus.
5. Function description for the major icon
A.
Play the .avi file.
B. Preview the video image.
C. Capture image with full motion video.
D. Take a picture.
E. Send photo through e-mail.
English
3
F. Use PC camera as a security monitoring system.
G. Exit the Genius VideoCAM Series UI.
H. Convert AVI files into MPEG format
NOTE
x Make sure to install the USB driver before connecting the device otherwise
unable to install properly. If you encounter problems, uninstall the driver and
software then follow the proper installation.
x Should you need the device under high luminance environment, please follow
the steps as below:
Camera Control Æ Control Æ Exposure
6. Function description for the security monitoring system icon.
English
4
You can record any movements that appear in front of your monitor
automatically. It can also record anytime until the HD is full. If there’s no
movement, it will shut down automatically after four seconds or until there
is new movement. It’s a great security monitoring system and you can set
the software so it works at times when you’re not around.
A.
Setup time of the security monitoring system.
When you start to record video, please press the play
button.
NOTE
x The recording file will be retained in C:\WINDOWS\Album.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Genius NB Owner's manual
-
-
-
-
Genius VIDEOCAM MESSENGER Installation guide
-
-
-
-
-
Other documents
-
Panasonic SDR-S15P User manual
-
Panasonic SDR-SW21P User manual
-
Panasonic sdr s15 sd camcorder black User manual
-
-
Panasonic SDRS45 Operating instructions
-
Panasonic SDRS70EP Operating instructions
-
Philips SDR-S50 User manual
-
-
-