Nostalgic Warehouse Single Cylinder Installation guide

Type
Installation guide

Nostalgic Warehouse Single Cylinder is a reliable door handle set designed for easy installation and smooth operation. It features pre-attached knobs for convenience, and its construction allows it to fit doors ranging from 1-3/4" to 2-1/4" in thickness. The handleset includes all necessary components, such as the cylinder assembly, escutcheon, deadbolt adapter plate, thumbturn assembly, and strike plates, providing a complete solution for your door hardware needs.

Nostalgic Warehouse Single Cylinder is a reliable door handle set designed for easy installation and smooth operation. It features pre-attached knobs for convenience, and its construction allows it to fit doors ranging from 1-3/4" to 2-1/4" in thickness. The handleset includes all necessary components, such as the cylinder assembly, escutcheon, deadbolt adapter plate, thumbturn assembly, and strike plates, providing a complete solution for your door hardware needs.

USE INCLUDED DOOR PREPARATION
TEMPLATE FOR NON-PREPPED DOORS
USE INCLUDED PLASTIC TEMPLATE FOR
PREPPED DOORS
14
14
2
2
13
13A
Install
Deadbolt
and
Handleset
Latches
Tongue
(See D Below Before
Deadbolt Latch
Installation)
(See Latch
Tongue Note
in Panel C)
Latch Tongue Note
Bevel Side
Face Plate Curve
Strike Plate Curve
Bevel side of latch tongue should
contact curved end of face plate,
and curved end of strike plate.
Deadbolt Latch Tongue Note
3C
3
4
Install
Cylinder
and
Escutcheon
Door Inside
3
5
6
Cylinder
Assembly
Insert Cylinder
Assembly
into Escutcheon,
and place on
door exterior.
Attach deadbolt
adaptor plate
with provided
screws.
7
8
Attach
Thumbturn
Assembly
with
provided
screws.
Push down Button
and Hold During
Insertion
Insert
Handleset
Spindle
Door-Outside
1
2
Insert Handleset Spindle
3 & 4
Cylinder and Escutcheon
Install
Exterior
Handleset
on Door
Exterior
(part #16)
18
22
24
23
19
17
20
20
3/4
Adapter Plate Screws
Adapter Plate
21
Install
Long Plate
with Knob
on Door
Inside
9
10
12
2
11
Install Jamb Strike Plate
Door
Jamb
Note: Handlesets fit doors 1-3/4” to 2-1/4” thick.
Single Cylinder Handleset
LONG PLATE
PRE-ATTACHED
KNOBS
Nostalgic Warehouse
Door Hardware
Installation Instructions
For assistance call 800-522-7336 Monday through Friday 7am to 4pm Mountain Time
For assistance call 800-522-7336 Monday through Friday 7am to 4pm Mountain Time
17
18
22
24
21
13A
14
26
25
9
10
12
16
15
14
1
3A
4
5
6
8
7
23
3C
3B
1A
13
19
20
11
2
1.
Deadbolt Latch
1A. Latch Tongue
2.
3/4″ Latch & Strike Wood Screws (8)
3.
Cylinder Assembly (W/Keys)
3A. Cylinder Body
3B.
Tailpiece
3C.
Spin Ring
4. Escutcheon
5.
Deadbolt Adapter Plate
6.
2
-
3/4″ Machine Screws (2)
7.
Thumbturn Assembly
8.
5/8″ Thumbturn Machine Screws (2)
9.
Dustbox for Deadbolt
10
Door Frame Reinforcer
11.
3″ Reinforcer Wood Screws (2)
12.
Strike Plate for Deadbolt
13.
Handleset Latch
13A.
Latch Tongue
14.
Latch Faceplate
15.
Handleset Spindle
16.
Handleset
17.
Adapter Plate
19.
Long Plate
18.
Adapter Plate Screws (2)
20.
3/4″ Plate Mounting Screws
21.
Knob
22.
Screw Cover Adapter
23.
2-7/8″ Lower Mounting Screw
24.
Mounting Screw Cover
25.
Dustbox for Handleset
26.
Strike Plate for Handleset
}
3
Cross-Bore
Holes
Edge-Bore
Holes
Part
Number
Part
Description
Exploded Drawing Single Cylinder Handleset
With Pre-Attached Knob
  • Page 1 1
  • Page 2 2

Nostalgic Warehouse Single Cylinder Installation guide

Type
Installation guide

Nostalgic Warehouse Single Cylinder is a reliable door handle set designed for easy installation and smooth operation. It features pre-attached knobs for convenience, and its construction allows it to fit doors ranging from 1-3/4" to 2-1/4" in thickness. The handleset includes all necessary components, such as the cylinder assembly, escutcheon, deadbolt adapter plate, thumbturn assembly, and strike plates, providing a complete solution for your door hardware needs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI