Extron MDA 5V Owner's manual

MDA 5V
Extron
Brand
Extron
Model
MDA 5V
Category
Video line amplifiers
Type
Owner's manual

Extron MDA 5V is a distribution amplifier designed to distribute buffered composite video signals. It features one input and seven outputs, allowing you to send a single video source to multiple displays or projectors. The MDA 5V supports high-resolution video formats and provides excellent signal quality and reliability. It is commonly used in commercial and residential AV systems, such as conference rooms, classrooms, and home theaters, to distribute video content from DVD players, Blu-ray players, or cable/satellite boxes to multiple TVs or projectors.

Extron MDA 5V is a distribution amplifier designed to distribute buffered composite video signals. It features one input and seven outputs, allowing you to send a single video source to multiple displays or projectors. The MDA 5V supports high-resolution video formats and provides excellent signal quality and reliability. It is commonly used in commercial and residential AV systems, such as conference rooms, classrooms, and home theaters, to distribute video content from DVD players, Blu-ray players, or cable/satellite boxes to multiple TVs or projectors.

1
IMPORTANT:
IMPORTANT:
Go to www.extron.com for the complete
user guide, installation instructions, and
specifications before connecting the
product to the power source.
MDA 5V • Setup Guide
The Extron® MDA 5V distribution ampliers distribute buffered composite video.
This guide provides quick setup instructions for experienced installers.
WARNING: Installation and service must be performed by authorized personnel only.
AVERTISSEMENT : L’installation et l’entretien doivent être effectués uniquement par un technicien qualifié.
MDA 5V
POWER
12V
.5A MAX
4
3
5
INPUT
IN HIGH Z
75 Ohm
LOOP 2
1
OUTPUTS
Rear Panel
DISTRIBUTION AMPLIFIER
Front Panel
1
1
1
2
2
2
3
3
3
4
4
46
6
67
7
7
Step 1
Turn all the equipment off and disconnect all cables.
Step 2
Mount the unit in a convenient location, in a rack, under a desk, or on a projector mounting system. Follow the
instructions included with the appropriate mounting kit.
Step 3
Connect the external 12 VDC power supply (provided) to the 2-pole, captive screw power
POWER
12V
.5A MAX
SECTION A–A
Ridges
Smooth
Power Supply
Output Cord
AA
connector (2). When power is applied to the unit, the front panel LED (1) lights green.
CAUTION:
• Power supply voltage polarity is critical.Identify the power cord negative lead by the
ridges on the side of the cord (see the figure on the right).
• La polarité de la source d’alimentation est primordiale. Repérez le pôle négatif du
cordon d’alimentation grâce aux stries sur le côté du cordon (voir la figure à droite).
• Always use a power supply supplied by or specified by Extron for this unit. Use of an
unauthorized power supply voids all regulatory compliance certification and may cause
damage to the power supply and the distribution amplifier.
• Utilisez toujours une source d’alimentation fournie ou spécifiée par Extron. L’utilisation
d’une source d’alimentation non autorisée annule toute certification de conformité
réglementaire et peut endommager alimentation et l’amplificateur de distribution.
• If not provided with a power supply, this product is intended for use with a UL Listed
power source marked “Class 2” or “LPS” rated 12 VDC, 0.5 A minimum.
• Si le produit n’est pas fourni avec une source d’alimentation, il doit être utilisé avec une
source d’alimentation certifiée UL de classe 2 ou LPS avec une tension nominale de
12Vcc, 0.5 A minimum.
Step 4
Connect a video source to the video input (3), using composite video (BNC) connectors.
Step 5 (optional)
Connect the video loop feed (4) to a local monitor, using composite video connectors.
2
68-614-50 Rev. B
05 23
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide on the Extron website.
© 2010-2023 Extron — All rights reserved. www.extron.com
All trademarks mentioned are the property of their respective owners.
Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876
Step 6
If a terminated device was connected to the loop feed in step 5, set the HighZ/75Ohmswitch (6) to HighZ
HIGH Z
75 Ohm
(up position; see the image on the right). If no device or an unterminated device was connected to the loop feed
in step 5, set the switch to 75Ohm (down position).
Step 7
Connect up to ve display composite video devices to the outputs (7), using composite video connectors.
Troubleshooting — Contact the Extron service department.
  • Page 1 1
  • Page 2 2

Extron MDA 5V Owner's manual

MDA 5V
Extron
Brand
Extron
Model
MDA 5V
Category
Video line amplifiers
Type
Owner's manual

Extron MDA 5V is a distribution amplifier designed to distribute buffered composite video signals. It features one input and seven outputs, allowing you to send a single video source to multiple displays or projectors. The MDA 5V supports high-resolution video formats and provides excellent signal quality and reliability. It is commonly used in commercial and residential AV systems, such as conference rooms, classrooms, and home theaters, to distribute video content from DVD players, Blu-ray players, or cable/satellite boxes to multiple TVs or projectors.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents