2. Ridetech
  3. 11009402

Ridetech 11009402 Operating instructions

  • Hello, I've analyzed the instructions for the ridetech Tie Rod Adjuster 64-70 Falcon Billet. This document provides details on replacing the OEM steel sleeve with the billet tie rod adjuster, and emphasizes the importance of proper thread engagement and using antisieze compound. I'm ready to answer your questions.
  • What is the purpose of this Tie Rod Adjuster?
    How can I identify the left-hand threaded side?
    What compound is recommended for the threads?
    What is the minimum thread engagement required?
    How do I verify proper thread engagement?
1812-482-2932
Installation
Instructions
Recommended Tools
www.ridetech.com
Part # 11009402 - 64-70 Falcon Billet Tie Rod Adjuster
Major Components .....In the box
QTY Part Number Description
2 90000138 Tie Rod Adjuster
2 99800000 11/16”-16 Right Hand Jam Nut
2 99800001 11/16”-16 Left Hand Jam Nut
NOTES:
This Tie Rod Adjuster is designed to take place of the OEM steel sleeve.
One end of the adjuster has a groove cut in it, this is the LEFT HAND threaded side.
When installing the Tie Rod Adjuster, use antisieze compound on the threads.
FOR YOUR SAFETY, THE TIE RODS NEED A MINIMUM 1 1/32” OF THREAD ENGAGEMENT INTO THE
TIE ROD ADJUSTER. USE THE SIGHT HOLE IN THE SIDE OF THE TIE ROD ADJUSTER TO ENSURE
PROPER THREAD ENGAGEMENT.
REV2 5/15/23
/