2. Ridetech
  3. 11369571

Ridetech 11369571 Operating instructions

  • Hello, I'm a chat assistant and I've read the Installation Instructions document for the ridetech Steering Kit C10 1983-1987. The document includes details on the components like Tie Rod Adjuster, Jam Nuts, Idler Arm, Tie Rod Ends and Pitman Arm. It also highlights important safety guidelines like minimum thread engagement. I'm here to help with any questions you might have about this kit.
  • What is the purpose of the Tie Rod Adjuster?
    Which end of the adjuster is left-hand threaded?
    What should be used when installing the Tie Rod Adjuster?
1812-482-2932
Installation
Instructions
Recommended Tools
www.ridetech.com
Major Components .....In the box
QTY Part Number Description
2 90000138 Tie Rod Adjuster
2 99800000 11/16”-16 Right Hand Jam Nut
2 99800001 11/16”-16 Left Hand Jam Nut
1 90003068 Idler Arm
2 90003051 Outer Tie Rod End - 6.75” Long(from grease zerk) - 11/16”-18 Right Hand Thread
2 90003050 Inner Te Rod End - 8.625” Long(from grease zerk) - 11/16”-18 Left Hand Thread
1 90003069 Pitman Arm
Part # 11369571 - 1983-1987 C10 Steering Kit
NOTES:
This Tie Rod Adjuster is designed to take place of the OEM steel sleeve.
One end of the adjuster has a groove cut in it, this is the LEFT HAND threaded side.
When installing the Tie Rod Adjuster, use antisieze compound on the threads.
FOR YOUR SAFETY, THE TIE RODS NEED A MINIMUM 1 1/32” OF THREAD ENGAGEMENT INTO THE
TIE ROD ADJUSTER. USE THE SIGHT HOLE IN THE SIDE OF THE TIE ROD ADJUSTER TO ENSURE
PROPER THREAD ENGAGEMENT.
REV1 5/16/23
/