0035 Daybed
Assembly Instructions
Page 1 of 8
Note: Do not assemble
using power tools.
This can cause the bolts
to be overtightened
Use 2 People
WII-1119
Parts List
1
Drawer
Face x 3
MDrawer
Back x 3
NDrawer
Bottom x 3
ODrawer
Side x 6
PDrawer
Rail x 3
Q
Parts in Box A: Parts in Box C:
A
Headboard
Panel
(Left Hand)
x 1
B
Headboard
Panel
(Right Hand)
x 1
Bed Slat
x 25
R
Parts in Box B:
CBack Panel x 1
DRear Side Rail x 1
EFront Side Rail x 1
FPull Out Front Panel x 1
GPull Out Rear Panel x 1
HPull Out Support Rail x 1
Pull Out Side Panel
(Left Hand) x 1
Pull Out Side Panel
(Right Hand) x 1 Support x 2
JJ K L
Fit the Wheels (12) to the bottom of the Left & Right hand Pull Out Side Panel
(J & K) using Wood Screw 16mm (11).
0035 Daybed
Assembly Instructions
Page 2 of 8
3
Hardware List
2
M6 x 70mm JCB
x 10
M6 x 60mm JCB
x 2
M6 x 40mm JCB
x 2
M6 x 15mm JCB
x 16
Wood Dowel
(10 x 40mm) x 8
Barrel Nut
x 10
Wood Screw
(M4 x 32mm) x 52
Wood Screw
(M4 x 25mm) x 30
1 2 3 4
5 8
910
Handle
x 3
15
M4 x 16mm
Bolt x 3
14
Wheels
x 4
12
Allen Key x 1
16
Wood Dowel
(8 x 30mm) x 10
6Wood Dowel
(6 x 25mm) x 12
7
Metal Bracket
x 4
13
Wood Screw
(M4 x 16mm) x 32
11
J
12
11
12
11
12
11
11
12
K
WII-1119
0035 Daybed
Assembly Instructions
Page 3 of 8
Slide the Drawer Bottom (O) into the groove on the Drawer Sides (P).
5
Assemble the Drawer Face (M) to the Drawer Sides (P).
6
Important: Assemble the
small wheels at the back
N
10
P
7
7
Q
10
P
P
P
O
10
P
10 N
15 M
P
14
Assemble the Drawer Sides (P) and Drawer Rail (Q) to the Drawer Back (N).
Make sure the small wheels on the Drawer Sides (P) are next to the
Drawer Back (N).
4
Turn the Drawer over to fit angled
25mm Wood screws (10)
to the Drawer Rail (Q).
710
N
Q
M
WII-1119
x3
B
C
A
E
1
1
5
5
8
8
8
8
1
5
8
1
1
1
D
0035 Daybed
Assembly Instructions
Page 4 of 8
Assemble the Side Rail (D & E) and Back Panel (C)
to the Headboard Panel (A & B).
8
Screw the Bed Slats (R) between
the Side Rails (D & E).
9
Use 2 People
B
99
99
99
A
E
D
RR
WII-1119
x2
11
10
0035 Daybed
Assembly Instructions
Page 5 of 8
2
K
J
L
L
2
H
3
3
Assemble the Metal Bracket (13) & Wood Dowels (6) to
the Left & Right hand Pull Out Side Panel (J & K).
Attach the Supports (L) to the Support Rail (H) using 40mm JCBs (3).
Fit the Support Rail (H) to the Left & Right hand Pull Out Side Panel (J & K)
using Wood Dowels (6) and 60mm JCBs (2).
4
K
6
6
13
13
11
11
4
4
6
H
WII-1119
4
13
11
13
12
0035 Daybed
Assembly Instructions
Page 6 of 8
Assemble the Left & Right hand Pull Out Side Panel
(J & K) & Support (L) to the Pull Out Front Panel (F).
Bolt the Left & Right hand Pull Out Side Panel (J & K)
to the Pull Out Rear Panel (G).
K
J
F
L
L
H
K
J
F
G
4
13
11
9
6
WII-1119
14
0035 Daybed
Assembly Instructions
Page 7 of 8
Slide the Pull Out under the Bed.
WII-1119
Daybed
Pull Out
Lift
Lift
Slide in
Daybed
Pull Out
0035 Daybed
Assembly Instructions
Page 8 of 8
Assemble the Bed Slats (R) to the Pull Out Front Panel (F) &
Pull Out Rear Panel (G). Finally, fit the assembled Drawers.
Assembled
Drawer
15
WII-1119
R
9
9
9
9
9
9
F
/
