Model Numbers Feature Highlights
☐SLS139812PP Single Handle Lavatory Faucet with
Push Pop Drain Assembly
• Single lever cartridge with ceramic control components
• Braided supply hoses with 3/8" compression fittings
• 1.0 gpm (3.8 L/min) standard flow rate
• Single Handle Lavatory Faucet shall be metal
construction
• Plated in standard Polished Chrome finish
Location:
Compliance
-ASME A112.18.1/CSA B125.1
-NSF/ANSI/CAN 61: Q<1, NSF/ANSI 372
Dimensions
Limited Lifetime - to the original end
purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.
Warranty
SLS139812PP
Single Handle Lavatory Faucet
Specification Submittal
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2023 Symmons Industries, Inc. ■ symmons.com ■ [email protected]om ■ ZV-3718 REV 0 ■ 021523
c
Certied by
IAPMO R&T
DECK THICKNESS
MAX. 1-3/8" (35mm)
1-5/8"
(41mm)
5"
(127mm)
4-7/16"
(113mm)
HOLE SIZE
MIN. Ø 1-1/4" (32mm)
MAX. Ø 1-3/8" (35mm)
4-3/16"
(106mm)
6-3/16"
(157mm)
Notes:
1) Dimensions subject to change without notice
2) Hoses removed for clarity
WARNING: This product can expose you to chemicals
including lead, which is known to the state of
California to cause cancer, birth defects, or other
reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2023 Symmons Industries, Inc. ■ symmons.com ■ [email protected]om ■ ZV-3718 REV 0 ■ 021523
1
2
3
Plumbers Putty L
Q
X
N
Y
O
M
Push Pop Install: Insert drain body (L) into
drain opening. From below, Tighten locking
nut (O) with gasket (M) and washer (N) to
ange. Tighten tail nut (Y) with washer (X) to
secure tail pipe (Q).
Do Not overtighten.
Visual Install Guide
/