luminii Leto 44 Mini WM Installation guide

luminii
Brand
luminii
Model
Leto 44 Mini WM
Type
Installation guide

This manual is also suitable for

luminii Leto 44 Mini WM UD is a versatile and stylish lighting solution for both residential and commercial applications. Its slim profile and compact design make it ideal for use in a variety of spaces, from living rooms to offices to retail stores.

The luminii Leto 44 Mini WM UD features a high-quality LED light source that provides bright, even illumination. The light is dimmable, so you can customize the brightness to suit your needs. The fixture is also wet rated, making it suitable for use in both indoor and outdoor applications.

luminii Leto 44 Mini WM UD is a versatile and stylish lighting solution for both residential and commercial applications. Its slim profile and compact design make it ideal for use in a variety of spaces, from living rooms to offices to retail stores.

The luminii Leto 44 Mini WM UD features a high-quality LED light source that provides bright, even illumination. The light is dimmable, so you can customize the brightness to suit your needs. The fixture is also wet rated, making it suitable for use in both indoor and outdoor applications.

LETO 44 Mini S & WM
1 Rev July 26, 2021 403-216-7043 | [email protected]
MADE IN
CANADA
PROUD MEMBER OF
Read and follow these
instructions before installing or
maintaining this product
Veuillez lire et suivre ces
instructions avant l’installation ou
l’entretien de ce produit
• This product is suitable for DRY INDOOR
LOCATIONS ONLY
• Make sure this product is NOT on the same
circuit as inductive loads, (e.g. fluorescent bulbs,
discharge bulbs, ventilation fans, etc...)
• Do not switch on line voltage until all wiring is
complete
• Incorrect wiring will result in irreparable damage
to LED and power supply
• This product should only be installed by a
licensed electrician
• Ce produit convient pour une installation DANS
UN ENDROIT SEC SEULEMENT
• Assurer vous que des charges inductives ne se
retrouvent pas sur le même circuit que ce produit,
(i.e. fluorescent, ampoules à décharge,
ventilateurs, etc...)
• Compléter les branchements avant de mettre
sous tension
• Un branchement incorrect créerait des
dommages irréparables à l’alimentation et au DEL
• Ce produit devrait être uniquement installé par un
électricien qualifié
Warranty
Garantie
• This product must be installed in accordance
with all applicable installation codes and
ordinance
• Limited five (5) years warranty
• Warranty is void in the eventuality of
unauthorized modifications and/or improper use
• Ce produit doit être installé conformément au
code d’installation et autres normes applicables
• Garantie limitée de cinq (5) ans
• La garantie est non valide advenant une
modification non autorisée ou un usage non
approprié
Wall Mount
AC P4 / DC P5
Ceiling Surface Mount
AC P2 / DC P3
954 SEMI-RECESSED CANOPY
LETO 44 Mini S & WM
2 Rev July 26, 2021 403-216-7043 | [email protected]
MADE IN
CANADA
PROUD MEMBER OF
1
Finish ceiling installation. Make sure hole is cut to
appropriate size and location. 54mm (2.125”)
Disassemble driver housing to expose the driver.
2
Make electrical connections and use appropriate
strain relief.
3
Reassemble housing and insert into ceiling. Push
aside to leave room for canopy.
4
Line up fixture and insert into canopy
7
Connect dimming controls to included cable
clamps. Insert wires and canopy into ceiling.
5
Twist fixture clockwise until it locks in place.
(magnets will engage)
8
6
Turn screws until housing is secured in place
(arms will extend and clamp down on ceiling)
9-25mm
Surface: Ceiling Mount (AC Connection)
LETO 44 Mini S & WM
3 Rev July 26, 2021 403-216-7043 | [email protected]
MADE IN
CANADA
PROUD MEMBER OF
1
Finish ceiling installation. Make sure hole is cut to
appropriate size and location. 54mm (2.125”)
Disassemble driver housing to expose fixture
wiring. Cylinder housing is used as DC junction
box.
2
Make electrical connections and use appropriate
strain relief.
3
Reassemble housing and insert into ceiling. Push
aside to leave room for canopy.
4
Line up fixture and insert into canopy
7
Insert canopy into ceiling.
5
Twist fixture clockwise until it locks in place.
(magnets will engage)
8
6
Turn screws until housing is secured in place
(arms will extend and clamp down on ceiling)
9-25mm
Surface: Ceiling Mount (Remote DC Connection)
LETO 44 Mini S & WM
4 Rev July 26, 2021 403-216-7043 | [email protected]
MADE IN
CANADA
PROUD MEMBER OF
1
Finish wall installation. Make sure hole is cut to
appropriate size and location. 54mm (2.125”)
Disassemble driver housing to expose the driver.
2
Make electrical connections and use appropriate
strain relief.
3
Reassemble housing and insert into wall.
4
Line up fixture and insert into canopy
7
Connect dimming controls to included cable
clamps. Insert wires and canopy into ceiling.
5
Twist fixture clockwise until it locks in place.
(magnets will engage)
8
Surface: Wall Mount (AC Connection)
6
Turn screws until housing is secured in place
(arms will rotate and clamp against wall)
9-25mm
LETO 44 Mini S & WM
5 Rev July 26, 2021 403-216-7043 | [email protected]
MADE IN
CANADA
PROUD MEMBER OF
1
Finish wall installation. Make sure hole is cut to
appropriate size and location. 54mm (2.125”)
Disassemble driver housing to expose fixture
wiring. Cylinder housing is used as DC junction
box.
2
Make electrical connections and use appropriate
strain relief.
3
Reassemble housing and insert into wall.
4
Insert canopy into wall. Use flat sides to level
canopy horizontally.
56
Turn screws until housing is secured in place
(arms will rotate and clamp against wall)
9-25mm
Surface: Wall Mount (Remote DC Connection)
Line up fixture and insert into canopy
7
Twist fixture clockwise until it locks in place.
(magnets will engage)
8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

luminii Leto 44 Mini WM Installation guide

luminii
Brand
luminii
Model
Leto 44 Mini WM
Type
Installation guide
This manual is also suitable for

luminii Leto 44 Mini WM UD is a versatile and stylish lighting solution for both residential and commercial applications. Its slim profile and compact design make it ideal for use in a variety of spaces, from living rooms to offices to retail stores.

The luminii Leto 44 Mini WM UD features a high-quality LED light source that provides bright, even illumination. The light is dimmable, so you can customize the brightness to suit your needs. The fixture is also wet rated, making it suitable for use in both indoor and outdoor applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents