The luminii LETO 11 and 11.5 Wet Canopy is suitable for damp or wet locations and can withstand direct exposure to water. It is designed to be installed by a licensed electrician and should not be used on the same circuit as inductive loads such as fluorescent or discharge bulbs. The canopy allows air to flow freely around the fixture and must be properly wired before switching on line voltage. Incorrect wiring can cause irreparable damage to the LED and power supply.
The luminii LETO 11 and 11.5 Wet Canopy is suitable for damp or wet locations and can withstand direct exposure to water. It is designed to be installed by a licensed electrician and should not be used on the same circuit as inductive loads such as fluorescent or discharge bulbs. The canopy allows air to flow freely around the fixture and must be properly wired before switching on line voltage. Incorrect wiring can cause irreparable damage to the LED and power supply.
The luminii LETO 11 and 11.5 Wet Canopy is suitable for damp or wet locations and can withstand direct exposure to water. It is designed to be installed by a licensed electrician and should not be used on the same circuit as inductive loads such as fluorescent or discharge bulbs. The canopy allows air to flow freely around the fixture and must be properly wired before switching on line voltage. Incorrect wiring can cause irreparable damage to the LED and power supply.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI