STEINEL Deckeneinbau-Adapter Deckeneinbau User manual
- Type
- User manual
STEINEL Deckeneinbau-Adapter Deckeneinbau enables you to install your sensor flush with the ceiling. This can be useful if you want to make the sensor less visible or if you have a low ceiling. The adapter is easy to install and can be used with all STEINEL sensors.
STEINEL Deckeneinbau-Adapter Deckeneinbau enables you to install your sensor flush with the ceiling. This can be useful if you want to make the sensor less visible or if you have a low ceiling. The adapter is easy to install and can be used with all STEINEL sensors.
DE Beilagenblatt Montage Deckeneinbau-Adapter
110085396 08/2021 Technische Änderungen vorbehalten. / Subject to technical modification without notice.
Das Beilagenblatt zeigt die Montage mit dem Deckeneinbau-Adapter (EAN 4007841079543).
Entnehmen Sie weitere Informationen der jeweiligen Gesamt-Bedienungsanleitung.
Sicherheitshinweise
■Vor allen Arbeiten am Sensor
die Spannungszufuhr
unterbrechen!
■Bei der Montage muss die
anzuschließende elektrische
Leitung spannungsfrei sein.
Daher als Erstes Strom
abschalten und Spannungs-
freiheit mit einem
Spannungsprüfer überprüfen.
■Bei der Installation des
Sensors handelt es sich um
eine Arbeit an der
Netzspannung. Sie muss
daher fachgerecht nach den
landesüblichen Installations-
vorschriften und
Anschlussbedingungen
durchgeführt werden. (z.B.
DE: VDE 0100,
AT: ÖVE-EN 1,
CH: SEV 1000 )
- 1 -- 4 -
Safety Precautions
■Disconnect the power supply
before attempting any work
on the sensor.
■During installation, the electric
power cable to be connected
must not be live. Therefore,
switch off the power first and
use a voltage tester to make
sure the wiring is off-circuit.
■Installing the sensor
involves work on the mains
power supply. This work must
therefore be carried out
professionally in accordance
with national wiring regulati-
ons and electrical operating
conditions. (e.g.
DE: VDE 0100,
AT: ÖVE-EN 1,
CH: SEV 1000 )
EN Insert sheet accessories ceiling installation adapter
The enclosed insert sheet illustrates mounting with the ceiling installation adapter (EAN 4007841079543).
For further information, refer to the respective complete operating instructions.
Lieferumfang (Abb.1./Abb.7.)
Montagebedingungen (Abb.2./Abb.8.)
Montageschritte
• Stromversorgung abstellen. (Abb.3./Abb.8.)
• Elektrischen Anschluss vornehmen. (Abb.3./Abb.8.)
• Seitenteile anschrauben. (Abb.4./Abb.10.)
• Federn einklappen und Dose einsetzten. (Abb.5./Abb.11.)
• Sensormodul auf setzen. (Abb.6./Abb.12.)
• Stromversorgung einschalten. (Abb.6./Abb.12.)
Scope of delivery (Abb.1./Abb.7.)
Mounting conditions (Abb.2./Abb.8.)
Mounting steps
• Switch o the power supply. (Abb.3./Abb.8.)
• Make the electrical connection. (Abb.3./Abb.8.)
• Screw on side parts. (Abb.4./Abb.10.)
• Fold in springs and insert electrical socket. (Abb.5./Abb.11.)
• Put on sensor module. (Abb.6./Abb.12.)
• Switch on power supply. (Abb.6./Abb.12.)
Deckeneinbau-Adapter (EAN 4007841079543) /
Ceiling installation adapter (EAN 4007841079543)
13. 3000 Serie / 3000 series CP I + II Serie / CP I + II series
DE Montage
EN Mounting
DE/EN Zubehör/Accessories
110085396_BEILAGE_Control Pro_3000_DL7_DE_EN.indd 1110085396_BEILAGE_Control Pro_3000_DL7_DE_EN.indd 1 02.08.21 12:0602.08.21 12:06
- 3 -- 2 -
1. 3000 Serie / 3000 series
2. 3000 Serie / 3000 series
68 mm
10 - 25 mm
3. 3000 Serie / 3000 series
I
O
4. 3000 Serie / 3000 series
5. 3000 Serie / 3000 series
6. 3000 Serie / 3000 series
I
O
7. CP I + II Serie / CP I + II series
8. CP I + II Serie / CP I + II series
68 mm
10 - 25 mm
9. CP I + II Serie / CP I + II series
I
O
10. CP I + II Serie / CP I + II series
11. CP I + II Serie / CP I + II series
12. CP I + II Serie / CP I + II series
I
O
110085396_BEILAGE_Control Pro_3000_DL7_DE_EN.indd 2110085396_BEILAGE_Control Pro_3000_DL7_DE_EN.indd 2 02.08.21 12:0602.08.21 12:06
-
1
-
2
STEINEL Deckeneinbau-Adapter Deckeneinbau User manual
- Type
- User manual
STEINEL Deckeneinbau-Adapter Deckeneinbau enables you to install your sensor flush with the ceiling. This can be useful if you want to make the sensor less visible or if you have a low ceiling. The adapter is easy to install and can be used with all STEINEL sensors.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
Other documents
-
Eneo EDC-OPS-2/24V Mounting instructions
-
Leica DMI6000B User manual
-
Maico ECA 120 SERIES Mounting & Operating Instructions
-
Genius G60 G100 Operating instructions
-
-
MICRO-EPSILON wireSENSOR take up spool User manual
-
Tau Master Owner's manual
-
-
-
Waeco EasyCool EC-2500-AC Operating instructions
