American Standard T000.500.002 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the American Standard T000.500.002 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Certified to comply with ANSI A112.18.1
ROUGHING-IN DIMENSIONS
Installation
Instructions
TOO050X
BATH/SHOWER TRIM KIT
*Hex key (Supplied with Fitting)
Required Tools
Adjustable Wrench
Flat Blade Screwdriver
Phillips Screwdriver
TM
FINISHED WALL
4"
TOP OF TUB RIM
BOTTOM OF TUB
74" FOR HEAD CLEARANCE
1-5/8" TO 3-1/4"
5-1/8"
1/2" NPT
7-7/8"
1/2” REF.
5-1/8"
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' AND 78'
1/2" NPT
48" TO
54" OPTIONAL
9"
1"
M968739 Rev. 1.2
To assure proper positioning in relation to wall,
note roughing-in dimensions.
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
CAUTION: Protect the finish on SHOWER ARM,
SHOWER HEAD and TUB SPOUT when installing.
Hex key (Supplied with Fitting)
9
10
5
6
7
15
3
4
13
8
8
*12
2
14
11
1
INSTALL TRIM
*DO NOT REMOVE IN FIBERGLASS
OR THIN WALL APPLICATIONS
1
Remove PLASTER GUARD *(12).
Push CAP (1) over VALVE CARTRIDGE (2).
Mount ESCUTCHEON CARRIER (3) to valve body using SCREWS (4).
Mount ESCUTCHEON (5) to ESCUTCHEON CARRIER (3) using
SCREWS (6).
Attach DECORATIVE RING (7) to ESCUTCHEON (5).
Remove PIPE CAPS (8) from shower pipe and tub filler pipe.
Install SHOWER ARM (9) and SHOWER HEAD
(10).
Install TUB FILLER SPOUT (11).
Push HANDLE (13) onto CARTRIDGE STEM (14) and tighten
SET SCREW (15).
3
EverClean™ Finish Care Instructions
American Standard’s EverClean finish will wipe clean with a soft, dry cloth. A soft cloth with
clean water may also be used, if desired. No additional cleaning products are required.
DO NOT USE: Soaps, acid, polish, abrasives, harsh cleaners, or a cloth with a coarse surface.
2
ADJUST HOT LIMIT STOP
By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP
reduces risk of accidental scalding. To set the maximum hot water temperature of your faucets, all you need to do is adjust
the setting on the HOT LIMIT SAFETY STOP.
Use a flat blade screwdriver or your fingers to pull up and rotate red HOT LIMIT SAFETY STOP (1). Follow Step "A" or "B" to
adjust min./max. discharge temperature. "0" being the hottest to "7" the coldest temperature setting. Factory set at "0".
HOT LIMIT SAFETY STOP ADJUSTMENT
PRY RED RING FORWARD AND ROTATE
COUNTER-CLOCKWISE ONE CLICK
PRY RED RING FORWARD AND ROTATE CLOCKWISE
"A"
ADJUSTMENT WHEN WATER IS TOO HOT
"A"
"B"
"B"
ADJUSTMENT WHEN WATER IS TOO COLD
"RED RING"- HOT LIMIT SAFETY STOP
TEMPERATURE SETTING NUMBERS
0
1
2
3
4
5
6
1
M968739 Rev. 1.2
Replace the "YYY" with
appropriate finish code
CHROME
WHITE
BONE
WHITE/CHROME
BLACK NICKEL/POL. BRASS
POLISHED BRASS
SATIN
SATIN/POL. BRASS
CHROME/POL. BRASS
002
020
021
025
062
099
295
297
299
T00050X
MODEL NUMBER
TM
BATH/SHOWER TRIM
Product names listed herein are trademarks of American Standard Inc.
©American Standard Inc. 2002
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Weekdays 8:00 a.m. to 6:00 p.m. EST
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
023572-YYY0A
DIVERTER SPOUT (IPS)
M953580-YYY0A
SHOWER HEAD
M900500-YYY0A
DELUXE SHOWER ARM
012653-YYY0A
DIVERTER SPOUT REPAIR KIT
M961740-YYY0A
ESCUTCHEON KIT AND SCREWS
M907052-YYY0A
ESCUTCHEON CAP
A918647-0070A
ESCUTCHEON SCREWS
078016-0020A
SCREWS
M961827-0070A
ESCUTCHEON HOLDER KIT
030126-0070A
HANDLE INDEX SET
M961741-YYY0A
LEVER HANDLE
M961743-YYY0A
DECORATIVE RING
IN MEXICO 01-800-839-12-00
M968739 Rev. 1.2
1/3