Whirlpool 200 270 65 User guide

1. Front left Sprintstar cooking zone Ø 145 mm, 1200 W, 230 V

2. Rear left Sprintstar cooking zone Ø 210 mm, 2100 W, 230 V

3. Rear right Sprintstar cooking zone Ø 145 mm, 1200 W, 230 V

4. Right front Sprintstar cooking zone Ø 180 mm, 1800 W, 230 V

DIMENSIONS OF THE HOB

HOB 492 PRODUCT DESCRIPTION SHEET

USE OF THE HOB

HOB 492 PRODUCT DESCRIPTION SHEET

Press the front button of Section A to switch the hob on.

Select and press the button for the cooking zone required, in section B.

Press the +/- buttons (section C) to select the temperature required (considering that value

9 is the maximum and 1 the minimum position).

The booster can be used to reach the temperature required more quickly. Select the

cooking zone required as usual, use the + button C to select the maximum power position

9, press button + again so that the letter A appears. This will alternate with the number 9.

At this point the final cooking position required (normal cooking 5/6) can be set by means

of the – button of section C.

The booster will continue to flash for the time needed to reach the temperature chosen as

quickly as possible; once this is reached the display stops flashing and the cooking

temperature stays on the position chosen.

If necessary, e.g. to prevent children changing the cooking times/mode selected or to clean

the surface of the glass ceramic hob, the functions of the working area can be locked by

pressing the button with the key symbol, in section D.