Whirlpool HOB 495/S User guide

1. Rear left round Halogen cooking zone Ø 180 mm, 1800 W, 230 V

2. Central oval double Sprintstar cooking zone Ø 145/250 mm, 1000/1800 W, 230 V

3. Right double Sprintstar cooking zone Ø 140/210 mm, 1000/2100 W, 230 V

4. Front left round Halogen cooking zone Ø 145 mm, 1200 W, 230 V

DIMENSIONS OF THE HOB

HOB 495 PRODUCT CARD

DE AU GB FR BE NL ES IT SE NO DK SF CZ SK PL HU RU BG RO

Press the front button of Section E to switch the hob on.

Select and press the button for the cooking zone required, in section A.

Press the +/- buttons (section C) to select the temperature required (considering that value

9 is the maximum and 1 the minimum position).

The timer can be switched on to select the cooking time; after selecting and pressing the

button for the cooking zone chosen, press the Timer button D to switch it on. Use the +/-

buttons to set the cooking time (from 1 to 99 minutes). When the preset cooking time has

passed, the Timer will automatically switch the switched-on cooking zone off and as a

confirmation a buzzer will sound for a few seconds.

If both circuits of the two double cooking zones, oval or round, are required, after choo-

sing and pressing the button of the cooking zone selected, as usual in section A, press but-

ton B to switch on the double circuit: both circuits of the double cooking zone selected

will work.

The booster can be used to reach the temperature required more quickly. Select the

cooking zone required as usual, use the + button to select the maximum power position 9,

press button + again so that the letter A appears. This will alternate with the number 9.

At this point the final cooking position required (normal cooking 5/6) can be set by means

of the - button.

The booster will continue to flash for the time needed to reach the temperature chosen as

quickly as possible; once this is reached the display stops flashing and the cooking tempe-

rature stays on the position chosen.

If necessary, e.g. to prevent children changing the cooking times/mode selected or to

clean the surface of the glass ceramic hob, the functions of the working area can be

locked by pressing the button with the key symbol, in section E.

HOB 495 PRODUCT CARD

USE OF THE HOB









