Panasonic CYTM100N Operating instructions

Brand: Panasonic

Model: CYTM100N

Type: Operating instructions

●

Please read these instructions carefully before using this product and keep this manual for future reference.

●

Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren

Sie sie danach für spätere Nachschlagzwecke sorgfältig auf.

●

Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.

●

Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handle ding

voor later gebruik.

●

Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale

per usi futuri.

●

Lea con atenci

Ón estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el

futuro.

Dynamic Navigation Unit

Dynamisches Navigationsgerät

Module de navigation dynamique

Dynamische navigatie-eenheid

Unità di navigazione dinamica

Unidad de navegación dinámica

CY-TM100N

Operating Instructions

Bedienungsanleitung

Manuel d’instructions

Gebruiksaanwijzing

Manuale di istruzioni

Manual de Instrucciones

DV2300

•B

•A

L IN

•

8mm

Before Use

Contents and Accessories

●Upgrade disc

●Operating

Instructions

●Warranty card

Accessories (CY-TM100N)

Please contact the shop where you purchased this product if you

are missing any of the following accessories.

Advanced

use

ENGLISH

(ENG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-57

DEUTSCH (DEU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-113

FRANÇAIS (FRA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114-169

NEDERLANDS (NED) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170-225

ITALIANO (ITA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226-281

ESPAÑOL (ESP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282-337

Prepa-

ration

Imme-

diate

use

necessary

● Refer to the Original Operating Instructions for the Navigation

System accessories.

● Refer to the Installation Instructions, for a mounting kit (e.g.

Screws and Brackets).

● CY-TM100N is an optional unit to receive RDS-TMC by connecting

to CN-DV1800EN and CN-DV2300N. This unit is designed only for

connecting to CN-DV1800EN and CN-DV2300N. This unit cannot

run on other systems.

● The Map Disc is sold separately.

● The FM radio antenna for RDS-TMC reception is not supplied.

● The use of an antenna distributor may disturb the TMC reception.

In that case, please consult the shop where you purchased this

unit.

● This TMC unit cannot run on the MRE map discs. Use “TMC-

Ready” Map discs. ( page 12, 13)

Notes

CY-TM100N

ENG

necessary

Before Use

Routing

Rerouting

Marking

User setting

Contents and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Panasonic TMC Features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Introduction to TMC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Names and Functions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

●

Software Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

●Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

●Pop Up Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

●Checking Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

(Wiring check, Automatic distance correction check, GPS reception check)

●Map Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

●Route / Flags and TMC Display . . . . . . . . . . . . . . . . . . . . 25

●Changing the map Orientation / Scale . . . . . . . . . . . . . 26

●POI Icons on Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Destination Entry and Route Search . . . . .28

●Destination by address, intersection, POI, history,

a marked point and the map

Character Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

City / House number Selection and Postcode Entry

. . .

Direct Destination Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

After Routing

●

Route Search Cancellation, Whole Route display,

Route guidance cancellation

. . . . . . . . . . . . . . . . . . . . . . .

Route Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Dynamic Reroute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Route list / Urgent TMC Information display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Marked Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

TMC Station Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Precautions / System Performance

●Voice Guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

●Automatic Distance Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

●GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

●Map Matching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

●Positioning Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

●Route Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

●Route Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Troubleshooting

●Verification First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

●Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

●TMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Installation (CY-TM100N)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Maintenance / Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Before Use

Safety Information

■Read the operating instructions for the unit and all other components of your Mobile Navigation

System carefully before using the system. They contain instructions about how to use the system in

a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from

failure to observe the instructions given in this manual.

■This manual uses pictographs to show you how to use the product safely and to alert you to potential

dangers resulting from improper connections and operations. The meanings of the pictographs are

explained below. It is important that you fully understand the meanings of the pictographs in order to

use this manual and the system properly.

To the CN-DV1800EN Users.

¡CN-DV1800EN upgraded to the TMC unit cannot operate on the MRE map disc.

Please buy “TMC-Ready” map disc (Order No. T1000–5685, etc. as of May 2002).

■

Do not keep your eyes fixed on the monitor screen or operate the system

while driving.

Do not change the settings and destination locations while driving. Minimize the time

spent on viewing the monitor screen and listening to the voice guidance while driving.

Operating the system will distract the driver from looking ahead of the vehicle and can

cause accidents. Always stop the vehicle in a safe location and use the parking brake

before operating the system.

■ Always obey local traffic regulations.

Your guided route may include roads that are not open to vehicles or are closed due to

traffic regulations. Comply with the local traffic regulations and take another route.

■ Do not use the unit when it is out of order.

If the unit is out of order (no image, no sound) or in an abnormal state (has foreign

matter in it, is exposed to water, is smoking, or smells), then turn it off immediately and

consult with the store where you purchased it. Using the unit in out-of-order condition

may lead to accidents, fires, or electric shocks.

■ Never install the product in a location where it interferes with your field of vision.

Installing the product in locations where it obstructs your field of vision in front of or

behind the vehicle or interferes with your driving (near the gear shift lever, brake pedal,

etc.) will lead to accidents.

■Never use safety-related components for installation, grounding, and other such

functions.

Do not use safety-related vehicle components (gasoline tank, brake, suspension,

steering wheel, etc.) for wiring or fixing the product or its accessories.

■ Use the proper power supply.

This product is designed for operation with a negative grounded 12 V DC battery

system.

■ Remove the negative (–) terminal from the battery before wiring.

Wiring or installing the product with the minus battery terminal connected may lead to

electric shock or injury due to short circuiting.

Warnings

Warning

This label intends to alert you to the presence of important

operating instructions and Installation Instructions. Failure to

heed the instructions may result in severe injury or death.

Warning

ENG

Before Use

■ Refer fuse replacement to qualified service personnel.

When the fuse burns out, eliminate the cause and have it replaced with the fuse

prescribed for the unit by a qualified service engineer. Incorrect replacement of the

fuse may lead to smoke, fire, and damage to the product.

■ Make sure the leads do not interfere with driving or getting in and out of the

vehicle.

Bundle the leads together or attach them to prevent them from impeding with the

steering wheel, gear shift lever, brake pedal, the driver's feet, or anything else.

Otherwise the leads may get caught in moving parts such as the brake pedal and gear

shift lever and will lead to accidents.

■ Do not disassemble.

Do not disassemble the product or attempt to repair it yourself. If the product needs to

be repaired, take it to the shop where you purchased it or to an authorized service

centre.

■ Installing the product on the airbag cover or in a location where it interferes with

airbag operation is prohibited.

Never install the product on the airbag cover or in a location where it interferes with

airbag operation. The airbag will not be able to operate properly or the unit or its parts

may be expelled together with the airbag, leading to accidents or injuries.

■ Check for piping, gasoline tank, electric wiring, and other items before installing

the product.

If you need to open a hole in the vehicle chassis to attach or wire the product, first

check where wire harnesses, gasoline tank, and electric wiring are located. Then open

the hole from outside if possible.

■ Follow installation and wiring directions.

Carefully follow the directions given in the installation manual when installing and wiring

the product. Incorrect wiring may lead to accidents or fire or cause damage to the

product.

■ Connect the parking brake lead for safety.

Make sure to connect the parking brake lead for your own safety. Otherwise the

navigation system safety functions will not operate which will lead to accidents.

■ Attach the product securely.

Install the product securely, making sure to use appropriate tools. Also attach the

cords with cord clamps or tape.

■ Keep batteries out of reach of infants.

Batteries can be ingested so keep them out of the reach of infants. If an infant ingests

a battery, please seek immediate medical attention.

■ Store the remote control unit in the holder when it is not in use.

If the remote control unit is not stored in the holder, then it could fall down while driving,

get wedged under the brake pedal, and lead to a traffic accident.

■ Never attempt to play the map disc on an audio player.

Do not attempt to play the map disc on other CD (DVD) player. The loud sound

produced may damage your hearing and your speakers.

Warnings

Warning

This label intends to alert you to the presence of important

operating instructions and Installation Instructions. Failure to

heed the instructions may result in severe injury or death.

Warning

ENG

Before Use

Caution

This label intends to alert you to the presence of important

operating instructions and Installation Instructions. Failure to

heed the instructions may result in injury or material damage.

Caution

Cautions

■ Do not use the product where it is exposed to water, moisture, or dust.

Exposure to water, moisture, or dust may lead to smoke, fire, or other damage to the unit.

Make especially sure that the unit does not get wet in car washes or on rainy days.

■ Keep the voice guidance volume at an appropriate level.

Keep the volume level low enough to be aware of road and traffic conditions while driving.

■ Protect the Deck Mechanism.

Do not insert any foreign objects into the slot of this unit.

■ This navigation system is designed use for exclusively in automobiles.

This navigation system should only be installed in an automobile. Do not install it in a

ship, aircraft, or any other vehicles except an automobile. Do not use it outdoors

■ Refer wiring and installation to qualified service personnel.

Installation of this navigation system requires special skills and experience. For

maximum safety, have it installed by the shop where you purchased it. Panasonic is not

liable for any problems resulting from your having installed the unit yourself.

■ Take care not to damage the leads.

When wiring, take care not to damage the leads. Prevent them from getting caught in

the vehicle chassis, screws, and moving parts such as seat rails. Do not scratch, pull,

bend or twist the leads. Do not run them near heat sources or place heavy objects on

top of them. If leads must be run over sharp metal edges, then protect the leads by

winding them with vinyl tape or similar protection.

■ Use the designated parts and tools for installation.

Use the supplied or designated parts and appropriate tools to install the product. The use

of parts other than those supplied or designated may result in internal damage to the unit.

Faulty installation may lead to accidents, malfunction, or fire.

■ Do not block the air vent or the cooling plate of the unit.

Blocking these parts will cause the interior of the unit to overheat and will result in fire or

other damage.

■ Do not insert or allow your hand or fingers caught in the unit.

To prevent injury, do not get your hand or fingers caught in moving parts or in the disc

slot. Especially watch out for infants.

■ Do not install the product where it is exposed to strong vibrations or is unstable.

Avoid slanted or strongly curved surfaces. If the installation is not stable, the unit may

fall down while driving and this can lead to accidents and injuries.

■ Do not operate the unit for prolonged periods with the engine turned off.

Operating the navigation system for a long period of time with the engine turned off will

drain the battery.

■ Directions for using lithium batteries.

This product contains a lithium battery. There is danger of explosion if the battery is

incorrectly replaced. Replace only with same type of battery or an equivalent type

recommended by the manufacturer. Dispose of used batteries according to the

manufacturer's instructions.

Safety Information

ENG

Before Use

PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING NAVTECH PRODUCT

This software and data (“Software”) is provided for your personal, non-commercial use only. Copyright and other Laws

protect it.

By using this Software you agree to the following terms and conditions.

You agree to use this Software for solely personal use or, if applicable, for use in your business‘ internal operations, and

not for service bureau, time-sharing or other similar purposes. Except to save it on your hard drive, you may not copy or

reproduce this Software, and may not distribute it in any form, for any purpose. You agree not to disassemble, decompile

or otherwise reverse engineer the Software, except to the extent expressly permitted by mandatory laws.

Further Restrictions. You may not use this Software with: (i) any positioning devices, including without limitation, any

GPS receivers, compasses, wheel sensors, or any other distance or direction sensors; or (ii) any products, systems or

applications installed in or otherwise connected to or in communication with vehicles, or capable of vehicle navigation,

positioning, dispatch, real time route guidance, fleet management or similar applications; or (iii) any hand-held computer

devices, cell phones or similar mobile devices.

No warranty

. This Software is provided to you “as is,” and you agree to use it at your own risk. Panasonic and its

suppliers and licencers make no guarantees, representations or warranties of any kind, express or implied, arising by law

or otherwise, including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, fitness for a

particular purpose, usefulness, use or results to be obtained from this Software will be uninterrupted or error-free.

Disclaimer of Warranty: Panasonic AND ITS SUPPLIERS AND LICENSORS DISCLAIM ANY WARRANTIES, EXPRESS

OR IMPLIED, OF QUALITY, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR

NON-INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty exclusions, so to that

extent the above exclusion may not apply to you.

Disclaimer of Liability

: Panasonic AND ITS SUPPLIERS AND LICENSORS SHALL NOT BE LIABLE TO YOU: IN

RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE

CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH MAY

RESULT FROM THE USE OR POSSESSION OF THE SOFTWARE; OR FOR ANY LOSS OF PROFIT, REVENUE,

CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL

DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THIS SOFTWARE, ANY DEFECT IN THE

SOFTWARE, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR

TORT OR BASED ON A WARRANTY, EVEN IF Panasonic OR ITS LICENSORS HAVE BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. Some states, Territories and Countries do not allow certain liability exclusions or

damages limitations, so to that extent the above may not apply to you.

Indemnity. You agree to indemnify and hold Panasonic and its suppliers and licensors harmless from any liability or loss

of any kind arising out of or in connection with any use by you of this Software.

Export Control. You agree not to export from anywhere any part of the Software provided to you or any direct product

thereof except in compliance with applicable export laws, rules and regulations.

Governing Law. The above terms and conditions shall be governed by the laws of the Netherlands, without giving effect

to (i) its conflict of laws provisions, or (ii) the United Nations Convention for contracts for the international Sale of Goods.

SOFTWARE (MAP DISC) LICENCE AGREEMENT

■ Battery Information

■

Observe the following cautions when handling the batteries for the remote control unit.

●

Use only the specified AA batteries (R6PU).

●

Match the polarity of the batteries with the (+) and (–) marks in the battery case.

●

Do not mix old and new or different types of batteries.

●

Replace dead batteries as soon as possible.

●

Remove the batteries from the remote control unit when not using it for an extended period of time.

●

Do not leave the batteries or the remote control unit with the batteries where temperatures can

become very high such as inside your vehicle when it is closed, the vehicle trunk, places

exposed to direct sunlight, or near a heater.

●

Insulate batteries (by placing them in a plastic bag or covering them with vinyl tape).before

disposal or storage. Dispose of batteries according to the local regulations.

●

Keep batteries out of reach of the infants. Batteries can be ingested by infants. In that event,

seek immediate medical attention.

●

Do not throw away the battery. Instead, take it to the designated collection point and hand it in as

hazardous waste.

In case of battery leakage

●

Thoroughly wipe the battery liquid off the battery case and insert new batteries.

●

If any part of your body or clothing comes into contact with battery liquid, wash with plenty

of water.

●

If battery liquid comes into contact with your eyes, wash them with plenty of water and get

immediate medical attention.

Caution

ENG

Start

Before Use

Enhancing your navigation system

Panasonic TMC Features!

¡15 types TMC icons can be

displayed on the map.

15 types of the TMC event icons are

displayed on the map screen so that

you can recognize the events at a

glance.

( page 25)

¡Practical Dynamic routing

The car navigation system searches for a

practical route on the basis of the TMC data,

and is able to reroute according to the

circumstances because it always observes

closed road information. If there is something

happened in the traffic, the system shows it

immediately on the screen.

( page 36)

TMC reception

indicator

The receiving

conditions of TMC

stations are

displayed.

( page 25)

ENG

Destination

Before Use

¡Notification of Urgent TMC

Information with its position.

The car navigation system shows that

urgent TMC information is received

on the screen. It also indicates the

event position. Accordingly, you are

offered higher level of safety in

driving.

( page 37)

Preferred receiving station selection.

Priority

mark

Note

The pages that

bear this mark

explain the

function of TMC.

TMC unit automatically selects a

station whose receiving condition is

the best, and you can specify which

TMC station should be high priority.

( page 45)

ENG

Before Use

Panasonic TMC Features

Changes

Equipping with TMC will upgrade your navigation system as follows:

Pop Up Menu

Map Display

Setup Menu

This menu bar is

added.

These icons and indicators are added.

( page 25)

This menu bar is added.

ENG

Extent icon represents

the influential range of an

event and its direction (yellow)

Before Use

START!!

You are ready to use

the TMC unit.

Name of your car

navigation system

Is the TMC unit

installed securely ?

Refer installing the

unit to the qualified

installer.

( page 54)

Upgrade your

navigation software

to fit the TMC unit.

( page 18)

Do you have

“TMC-Ready”

map disc?

This unit needs

“TMC-Ready” map

disc. Please buy it.

Not supported.

Please consult the store where you

purchased your system.

(e.g. CN-DV2000EN)

( page 13)

CN-DV1800EN / 2300N

Others

NoYes

Yes

NoYes

230

•BO

ERL

ESS

E C

LCU

TIO

•AL

L IN VIEW

•GYR

SCO

PE SE

CN-DV1800EN CN-DV2300N

Check if the [TMC]

lamp in the wiring

check screen lights.

( page 22)

Yes

Ensure that the unit is

connected properly.

( page 56)

Check receiving

conditions of FM radio

waves. ( page 53)

Check if the TMC

indicator in the

map screen lights

in green.

Hasn't the indicator

become green in

approx. an hour?

Preparation chart

ENG

Before Use

Introduction to TMC

TMC performance

Panasonic welcomes you to our ever growing family of electronic product owners.

We know that this product will bring you many hours of enjoyment.

Our reputation is built on precise electronic and mechanical engineering, and our products

are manufactured with carefully selected components and assembled by people who take

pride in their work. Once you discover the quality, reliability, and value we have built into

this product, you too will be proud to be a member of our family.

Features

TMC Unit

Note

This operating instructions explain the operations of Panasonic mobile navigation systems,

CN-DV1800EN and CN-DV2300N, equipped with the TMC unit CY-TM100N.

Please refer to the original installation instructions supplied with each navigation system for

installation. For installation of the TMC unit CY-TM100N, please refer to page 54 in this

book.

CY-TM100N is an optional unit to receive RDS-TMC by connecting to CN-DV1800EN and

CN-DV2300N. This unit is designed only for connecting to CN-DV1800EN and CN-

DV2300N. This unit cannot run on other systems.

This unit needs to upgrade its navigation software to be used on the mobile navigation

systems described above. Please refer to page 18 for upgrading.

● Panasonic is not liable for any problems resulting from having not upgraded

the navigation software of this unit or improper use of it.

● This TMC unit does not support MRE map discs. Use the “TMC-Ready” map

disc.

Cautions

RDS-TMC stands for Radio Data System-Traffic Message Channel, that is, a system which

utilizes the sub-carrier of FM radio waves to send various kinds of data. TMC is a channel of

RDS to send traffic messages. This TMC system allows you to add the following functions to

Panasonic navigation system.

1. Display of icons that represent traffic conditions on the navigation screen

2. Display of TMC urgent information on the navigation screen

3. Search the routes to avoid the closed roads referring to TMC information automatically.

● There are some areas where TMC service is not available. And some TMC stations may

supply insufficient TMC data.

● This TMC unit covers Germany and Netherlands now (as of May 2002).

● The TMC covering area will gradually become larger. As for the new covered area, please

ask the shop where you purchased this unit.

● TMC information is not always updated.

● TMC information does not cover all traffic conditions.

ENG

Before Use

Map Related Issues

TMC Reception

Notice to Customers

Map discs you may use are available as options (Order Number: T1000-5685, etc. as of May 2002).

For more information, contact the shop where you purchased the product.

●

If you believe there to be an error in the map data, please report this directly to

Navigation Technologies (NAVTECH) via the driver feedback form located on

their website.

You can find their site at www.navtech.com. If you do not have access to the

web, please forward this information to Navigation Technologies at the following

address:

Navigation

Technologies’

address:

Navigation Technologies Customer Service

PO Box 501 7300 AM Apeldoorn The Netherlands

TELEPHONE NUMBER

+ 800 18 23 53 22 (Toll Free) or + 31 555 384 245

FAX NUMBER

+ 31 555 433 947

(When calling, replace the + sign with the international dialing code for

The Netherlands from your country)

■ Map Disc

This unit supports only DVD-SDAL-formatted map disc (TMC-

Ready) that NAVTECH has specifically designed for this unit.

Panasonic shall not be liable for any damages caused by using

other formatted discs.

Caution

How to dispose of batteries (Netherlands)

Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn,

moet u ze niet weggooien maar inleveran als KCA.

Used battery disposal: This appliance contains a lithium battery for memory back-up.

Please consult the store where you purchased the product when the battery needs

replacement. Do not throw away the battery.

Instead, take it to the designated collection point and hand it in as hazardous waste.

TMC signal reception is poor in the following places:

In tunnels Among high-rise

buildings

Under elevated roads Out of service area

For some reasons, it may take approximately 30 minutes to recognize the TMC information.

● Please have the map and software version numbers (DVD Version) available in advance.

( page 19)

Note

Make sure the mark “TMC”

(TMC-Ready) is attached.

ENG

Note

Order Number

Before Use

Joystick

Selects items

by tilting it up, down, right, and left.

LAST key

Returns to the previous screen.

ZOOM key

Changes the map scale.

( page 26)

MODE key

Switches the screen mode.

(See Note below)

VOICE key

Initiates vocal guidance

for route maneuvers.

Monitor / Navigation changeover switch

Set to Navi mode.

POWER

●

Turns the monitor into the stand-by

mode or power-on mode

(changeover).

VOL (Volume)

●

Adjusts the volume. (Operative only

for the speakers that are embedded

in the monitor

)

MODE

●Not used.

ASPECT

●Switches the aspect

ratio.

Joystick

(Only for CQ-VA707N)

●Item selection

●Item adjustment

ENTER

(Only for CQ-VA707N)

●Executes the selected

item.

For Monitor Operation

(CY-VMR5800N, CQ-VA707N etc.) (Option)

Names and Functions (CN-DV2300N)

Notes

● This remote control can also control some functions of the Panasonic monitors. Refer to

each monitor's operation instructions for details.

●

Mode key switches the screen mode between navigation and others. If the monitor is

switched to external input while then the navigation system is in operation, the screen

background colour may change to black.

See the Operating Instructions for Monitor operation details.

Infrared transmitter

NAVI

MONITOR

Set to Monitor Mode.

ENG

These operating instructions describe the case of using CN-DV2300N. Basically, CN-DV1800EN can be used in much the

same fashion as CN-DV2300N. Refer to page 16 for differences in operations between CN-DV2300N and CN-DV1800EN.

These operating instructions describe the enhanced navigation functions except TMC for CN-DV1800EN users. Therefore,

some explanations are overlapped. CN-DV2300N users can ignore them.

Before Use

i{j

i|j

ENTER key

Executes a selected item.

DEST (Destination) key

Selects a destination.

( page 28)

POS (Position) key

Displays the current position.

( page 24)

POP UP key

Displays the searching menu.

( page 21)

SET UP key

Changes the settings.

( page 40)

Battery Inserting

@Open the

battery

compartment

cover.

AInsert the

new

batteries.

●Battery : Two AA batteries (R6PU)

●Battery life : Approximately 5

months of normal use (when

using manganese batteries at

ambient temperatures)

●Battery replacement : Replace the

batteries as soon as possible

when the infrared receiver does

not respond properly to remote

control operations, or when the

remote control does not work.

Note

Match the polarity of the batteries

with the

! and @ marks in the

battery case.

Note

Make sure that there is not any

pressure applied to any of the

remote control buttons when

placing the remote control in the

console box. Pressure on any of

the buttons will drain the batteries.

Numeric keys

●Numeric input

:Backspace

OK: Equivalent to

BClose the

battery

compartment

cover.

Note

You can input the postcode using these

numeric keys ( page 30, 31).

Note

ENG

Before Use

MOBILE NAVIGATION

SYSTEM

LAST

DEST

ENTER

POS

ZOOM

MODE

POP UP

SET UP

VOICE

Joystick

Selects items

by tilting it up, down, right, and left.

LAST key

Returns to the previous screen.

ZOOM key

Changes the map scale.

( page 26)

MODE key

Switches the screen mode.

(See Note below)

VOICE key

Initiates vocal guidance

for route maneuvers.

Names and Functions (CN-DV1800EN)

Notes

● MODE Key switches the screen mode between navigation and others. If the monitor

is switched to external input while then the navigation system is in operation, the

screen background colour may change to black.

See the Operating Instructions for Monitor operation details.

● These instructions applies to the remote control supplied with CN-DV2300N. As for

CN-DV1800EN, refer to the descriptions of the corresponding keys on this page.

● Optional monitors do not operate with the remote control of CN-DV1800EN.

Infrared transmitter

Navi

Key Lock

Lock Switch

Up: NAV (Navigation) Mode

Down:Key Lock Mode

CROSS CURSOR KEYS

● These four keys are not assigned to any

functions by now.

ENG

i{j

i|j

Before Use

ENTER key

Executes a selected item.

DEST (Destination) key

Selects a destination.

( page 28)

POS (Position) key

Displays the current position.

( page 24)

POP UP key

Displays the searching menu.

( page 21)

SET UP key

Changes the settings.

( page 40)

Battery Inserting

@Open the

battery

compartment

cover.

AInsert the

new

batteries.

● Battery : Two AA batteries (R6PU)

● Battery life : Approximately 5

months of normal use (when

using manganese batteries at

ambient temperatures)

● Battery replacement : Replace the

batteries as soon as possible

when the infrared receiver does

not respond properly to remote

control operations, or when the

remote control does not work.

Note

Match the polarity of the batteries

with the

! and @ marks in the

battery case.

Note

Make sure that there is not any

pressure applied to any of the

remote control buttons when

placing the remote control in the

console box. Pressure on any of

the buttons will drain the batteries.

:Backspace

Equivalent to

BClose the

battery

compartment

cover.

Note

You can input the postcode using these

numeric keys ( page 30, 31).

LAST

DEST

POS

ZOOM

Numeric keys

These operating instructions describe the case of using CN-DV2300N. Basically, CN-DV1800EN can be used in much the

same fashion as CN-DV2300N. Refer to page 16 for differences in operations between CN-DV2300N and CN-DV1800EN.

These operating instructions describe the enhanced navigation functions except TMC for CN-DV1800EN users. Therefore,

some explanations are overlapped. CN-DV2300N users can ignore them.

Note

ENG

Before Use

Before initial use of the TMC unit, insert the upgrade disc (supplied with CY-TM100N) into

the unit to upgrade the navigation software.

•

Turn the vehicle's ignition switch

to the ON or ACC position.

■ Software upgrade

● Be sure to upgrade the navigation software before using the TMC unit.

● Panasonic is not liable for any problems resulting from having not upgraded the

navigation software or improper use of it.

● This TMC unit does not support the MRE map discs. Use “TMC-Ready” map discs

( page 13).

Cautions

Slide the front cover of the unit.

Insert the upgrade disc with the

printed side facing up, and close

the front cover by pushing it up.

Before Use

Software Upgrade

●Do not get your hand or fingers caught in

moving parts or in the disc slot. This can

cause injuries. Be especially careful when

infants are present.

●Keep the front panel of the navigation system

closed except when loading or unloading a

map disc. Dust can cause malfunction.

Caution

● When there is a different disc in the unit.

Press u (EJECT).

Take out the different disc.

Upgrade is completed

Accessing Data screen

Upgrade starts (Loading

the program)*

● Never turn off the ignition switch while loading the program.

Cautions

ENG

● If the update confirmation screen is displayed before this screen appears(*), select

[YES] and press [ENTER] to start loading the update software.

Before Use

Press on the remote control.

Use the remote control joystick to scroll through the

menu options, select and press .

Select and press .

Software and map versions are now displayed.

● For further assistance please refer to page 40 in the instruction

book.

After software upgrade is completed, eject upgrade disc and insert map

disc (DVD-SDAL-formatted map disc (TMC-Ready)).

Please verify the software version to check if upgrade successfully completes. It is

successful if the software version (date) of your unit is the same as below or newer.

This information can be found by using the following procedure:

Take out the upgrade disc. Insert the map disc (“TMC-Ready”).

Note

When you cannot upgrade the navigation software, please consult the shop where you

purchased this unit.

Check this item.

Available Map Disc

TMC unit can operate on the following map discs:

¡“TMC-Ready” map discs released after September, 2001 (Make sure there is the

mark “TMC” on the map disc jacket.)

¡All map discs that are supplied to CN-DV2300N and its compatible system.

(e.g. order No. is T1000-5685, etc. as of May 2002)

ENG

Before Use

Insert the map disc (option) into the unit to start the Mobile Navigation System.

•

Turn the vehicle's ignition switch

to the ON or ACC position.

Read the [Warning]

Select a Language (Default: English).

For details ( page 43)

●Current position map

appears.

Opening screen [Warning] screen

■ Map Disc

●

Only map discs with a NAVTECH DVD-SDAL format that are seamless supported can be used

with this unit. Use DVD-SDAL-formatted map discs (TMC-Ready) that NAVTECH has specifically

designed for this unit (Order Number T1000-5685, etc. as of May 2002).

●

Refer to "Handling and Care of Map Discs" to know how to handle a map disc ( page 57).

Cautions

●

The map disc cannot be inserted or ejected while the

ignition switch is in the OFF position.

●

Remember that the battery can run down if the ignition

switch is kept in the ON or ACC position for a long time while

the engine not running.

●

If the monitor power is not linked with the power of the

navigation system, press the power button on the monitor.

Notes

●

Do not start driving until the opening screen and warning

screen close. This allows the system to stabilize.

●

Condensation may form on the optical lens or the map disc

inside the unit when the temperature in the vehicle increases in

a short time such as when heating the car on a cold day. This

condensation may cause malfunctions. If so, then unload the

map disc and do not operate the unit for approximately 1 hour.

Wipe the condensation off the map disc with a soft cloth.

If the unit does not operate correctly over 1 hour, then consult

the shop where you purchased the product.

Notes

The map displayed when you first turn on the unit

will show a different area than where your vehicle is

currently located. The map display will change to

your current area once GPS positioning signals are

received.

Note

Slide the front cover of the unit.

Insert the map disc

with the printed side facing

up, and close the front

cover by pushing it up.

Before Use

Activation

Select using and press Select a Language

ENG

Page is loading ...

Panasonic CYTM100N Operating instructions

Panasonic CYTM100N Operating instructions

Panasonic CYTM100N Operating instructions

Related papers

Other documents