Panasonic CQVD7001N Operating instructions

Brand: Panasonic

Model: CQVD7001N

Category: CD players

Type: Operating instructions

In-Dash 7” Widescreen Color LCD Monitor/DVD Receiver

CQ-VD7001N

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

OPEN / CLOSE

CQ-VD7001N

TILT

TEXT

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST/ MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

TEXT

Operating Instructions

Bedienungsanleitung

Manuel d’instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

Brugsvejledning

Instrukcja obs¬ugi

Návod k obsluze

Használati utasítások

àÌÒÚÛÍˆËﬂ ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË

Operating Instructions

Bedienungsanleitung

Manuel d’instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

Brugsvejledning

¡Please read these instructions carefully before using this product and keep this manual for future reference.

¡Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie danach

für spätere Nachschlagzwecke sorgfältig auf.

¡Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.

Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.

¡Läs igenom denna bruksanvisning noga innan produkten tas i bruk. Spara bruksanvisningen för framtida behov.

Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri.

¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.

¡Læs venligst denne brugsvejledning grundigt, inden dette produkt tages i brug og gem den til senere konsultation.

YEFM285662 TAMACO0105-0 Printed in Taiwan

Matsushita Electric Industrial Co., Ltd.

Web Site : http://www.panasonic.co.jp/global/

CQ-VD7001N

Safety Information

Warning

Observe the following warnings when using

this unit.

❑

The driver should neither watch the display nor op-

erate the system while driving.

Watching the display or operating the system will distract

the driver from looking ahead of the vehicle and can cause

accidents. Always stop the vehicle in a safe location and use

the parking brake before watching the display or operating

the system.

❑

Use the proper power supply.

This product is designed for operation with a negative

grounded 12 V DC battery system. Never operate this prod-

uct with other battery systems, especially a 24 V DC battery

system.

❑

Keep batteries and insulation film out of reach of in-

fants.

Batteries and insulation film can be ingested, so keep them

out of the reach of infants. If an infant ingests a battery or in-

sulation film, please seek immediate medical attention.

❑

Protect the Deck Mechanism.

Do not insert any foreign objects into the slot of this unit.

❑

Do not disassemble or modify the unit.

Do not disassemble, modify the unit or attempt to repair the

product yourself. If the product needs to be repaired, consult

your dealer or an authorized Panasonic Service Centre.

❑

Do not use the unit when it is out of order.

If the unit is out of order (no power, no sound) or in an ab-

normal state (has foreign objects in it, is exposed to water, is

smoking, or smells), turn it off immediately and consult your

dealer.

❑

The remote control unit should not lie about in the

car.

If the remote control unit lies about, it could fall on the floor

while driving, get wedged under the brake pedal, and lead to

a traffic accident.

❑

Refer fuse replacement to qualified service person-

nel.

When the fuse blows out, eliminate the cause and have it re-

placed with the fuse prescribed for this unit by a qualified

service engineer. Incorrect replacement of the fuse may lead

to smoke, fire, and damage to the product.

Observe the following warnings when in-

stalling.

❑

Disconnect the lead from the negative (–) battery

terminal before installation.

Wiring and installation with the negative (–) battery terminal

connected may cause electrical shock and injury due to a

short circuit.

Some cars equipped with the electrical safety system have

specific procedures of battery terminal disconnection.

FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE

UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY

SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND

PERSONAL INJURY OR DEATH.

❑

Never use safety-related components for installa-

tion, grounding, and other such functions.

Do not use safety-related vehicle components (fuel tank,

brake, suspension, steering wheel, pedals, airbag, etc.) for

wiring or fixing the product or its accessories.

❑

Installing the product on the air bag cover or in a lo-

cation where it interferes with airbag operation is

prohibited.

❑

Check for piping, gasoline tank, electric wiring, and

other items before installing the product.

If you need to open a hole in the vehicle chassis to attach or

wire the product, first check where the wire harness, gaso-

line tank, and electric wiring are located. Then open the hole

from outside if possible.

❑

Never install the product in a location where it inter-

feres with your field of vision.

❑

Never have the power cord branched to supply other

equipment with power.

❑

After installation and wiring, you should check the

normal operation of other electrical equipment.

The continuation of their using in abnormal conditions may

cause fire, electrical shock or a traffic accident.

❑

In the case of installation to an airbag-equipping

car, confirm warnings and cautions of the vehicle

manufacturer before installation.

❑

Make sure the leads do not interfere with driving or

getting in and out of the vehicle.

❑

Insulate all exposed wires to prevent short circuit-

ing.

This pictograph intends to alert you to the pres-

ence of important operating instructions and in-

stallation instructions. Failure to heed the instruc-

tions may result in severe injury or death.

■

Read the operating instructions for the unit and all other com-

ponents of your car audio system carefully before using the

system. They contain instructions about how to use the sys-

tem in a safe and effective manner. Panasonic assumes no re-

sponsibility for any problems resulting from failure to observe

the instructions given in this manual.

■

This manual uses pictographs to show you how to use the

product safely and to alert you to potential dangers resulting

from improper connections and operations. The meanings of

the pictographs are explained below. It is important that you

fully understand the meanings of the pictographs in order to

use this manual and the system properly.

Warning

This pictograph intends to alert you to the pres-

ence of important operating instructions and in-

stallation instructions. Failure to heed the instruc-

tions may result in injury or material damage.

Caution

CQ-VD7001N

CQ-VD7001N CQ-VD7001N

Safety Information

English

Warning

Observe the following warnings when using

this unit.

❑

The driver should neither watch the display nor

operate the system while driving.

Watching the display or operating the system will distract

the driver from looking ahead of the vehicle and can cause

accidents. Always stop the vehicle in a safe location and use

the parking brake before watching the display or operating

the system.

❑

Use the proper power supply.

This product is designed for operation with a negative

grounded 12 V DC battery system. Never operate this prod-

uct with other battery systems, especially a 24 V DC battery

system.

❑

Keep batteries and insulation film out of reach of

infants.

Batteries and insulation film can be ingested, so keep them

out of the reach of infants. If an infant ingests a battery or

insulation film, please seek immediate medical attention.

❑

Protect the Deck Mechanism.

Do not insert any foreign objects into the slot of this unit.

❑

Do not disassemble or modify the unit.

Do not disassemble, modify the unit or attempt to repair the

product yourself. If the product needs to be repaired, consult

your dealer or an authorized Panasonic Service Centre.

❑

Do not use the unit when it is out of order.

If the unit is out of order (no power, no sound) or in an

abnormal state (has foreign objects in it, is exposed to

water, is smoking, or smells), turn it off immediately and

consult your dealer.

❑

The remote control unit should not lie about in the

car.

If the remote control unit lies about, it could fall on the floor

while driving, get wedged under the brake pedal, and lead to

a traffic accident.

❑

Refer fuse replacement to qualified service person-

nel.

When the fuse blows out, eliminate the cause and have it

replaced with the fuse prescribed for this unit by a qualified

service engineer. Incorrect replacement of the fuse may lead

to smoke, fire, and damage to the product.

Observe the following warnings when

installing.

❑

Disconnect the lead from the negative (–) battery

terminal before installation.

Wiring and installation with the negative (–) battery terminal

connected may cause electrical shock and injury due to a

short circuit.

Some cars equipped with the electrical safety system have

specific procedures of battery terminal disconnection.

FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE

UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY

SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND

PERSONAL INJURY OR DEATH.

❑

Never use safety-related components for installa-

tion, grounding, and other such functions.

Do not use safety-related vehicle components (fuel tank,

brake, suspension, steering wheel, pedals, airbag, etc.) for

wiring or fixing the product or its accessories.

❑

Installing the product on the air bag cover or in a

location where it interferes with airbag operation is

prohibited.

❑

Check for piping, gasoline tank, electric wiring, and

other items before installing the product.

If you need to open a hole in the vehicle chassis to attach or

wire the product, first check where the wire harness, gaso-

line tank, and electric wiring are located. Then open the hole

from outside if possible.

❑

Never install the product in a location where it inter-

feres with your field of vision.

❑

Never have the power cord branched to supply other

equipment with power.

❑

After installation and wiring, you should check the

normal operation of other electrical equipment.

The continuation of their using in abnormal conditions may

cause fire, electrical shock or a traffic accident.

❑

In the case of installation to an airbag-equipping

car, confirm warnings and cautions of the vehicle

manufacturer before installation.

❑

Make sure the leads do not interfere with driving or

getting in and out of the vehicle.

❑

Insulate all exposed wires to prevent short circuit-

ing.

Caution

Observe the following cautions when using this

unit.

❑

Keep the sound volume at an appropriate level.

Keep the volume level low enough to be aware of road and

traffic conditions while driving.

❑

Do not insert or allow your hand or fingers to be

caught in the unit.

To prevent injury, do not get your hand or fingers caught in

moving parts or in the disc slot. Especially watch out for

infants.

❑

This unit is designed for use exclusively in automo-

biles.

❑

Do not operate the unit for a prolonged period with

the engine turned off.

Operating the audio system for a long period of time with the

engine turned off will drain the battery.

❑

Do not expose the unit to direct sunlight or exces-

sive heat.

Otherwise these will raise the interior temperature of the

unit, and it may lead to smoke, fire, or other damage to the

unit.

❑

Do not use the product where it will be exposed to

water, moisture, or dust.

Exposure of the unit to water, moisture, or dust may lead to

smoke, fire, or other damage to the unit. Make especially

sure that the unit does not get wet in car washes or on rainy

days.

Observe the following cautions when

installing.

❑

Refer wiring and installation to qualified service

personnel.

Installation of this unit requires special skills and experience.

For maximum safety, have it installed by your dealer.

Panasonic is not liable for any problems resulting from your

own installation of the unit.

❑

Follow the instructions to install and wire the prod-

uct.

Not following the instructions to properly install and wire the

product could cause an accident or fire.

❑

Take care not to damage the leads.

When wiring, take care not to damage the leads. Prevent

them from getting caught in the vehicle chassis, screws, and

moving parts such as seat rails. Do not scratch, pull, bend or

twist the leads. Do not run them near heat sources or place

heavy objects on them. If leads must be run over sharp

metal edges, protect the leads by winding them with vinyl

tape or similar protection.

❑

Use the designated parts and tools for installation.

Use the supplied or designated parts and appropriate tools

to install the product. The use of parts other than those sup-

plied or designated may result in internal damage to the unit.

Faulty installation may lead to an accident, a malfunction or

fire.

❑

Do not block the air vent or the cooling plate of the

unit.

Blocking these parts will cause the interior of the unit to

overheat and will result in fire or other damage.

❑

Do not install the product where it is exposed to

strong vibrations or is unstable.

Avoid slanted or strongly curved surfaces for installation. If

the installation is not stable, the unit may fall down while

driving and this can lead to an accident or injury.

❑

Installation Angle

The product should be installed in a horizontal position with

the front end up at a convenient angle, but not more than

30˚.

The user should bear in mind that in some areas there may

be restrictions on how and where this unit must be installed.

Consult your dealer for further details.

❑

Wear gloves for safety. Make sure that wiring is

completed before installation.

❑

To prevent damage to the unit, do not connect the

power connector until the whole wiring is complet-

ed.

❑

Do not connect more than one speaker to one set of

speaker leads. (except for connecting to a tweeter)

Observe the following cautions when handling

the battery for the remote control unit.

●

Use only specified battery (CR2025).

●

Match the polarity of the battery with the (+) and (–) marks

in the battery case.

●

Replace a dead battery as soon as possible.

●

Remove the battery from the remote control unit when not

using it for an extended period of time.

●

Insulate the battery (by placing them in a plastic bag or cov-

ering them with vinyl tape) before disposal or storage.

●

Dispose of the battery according to the local regulations.

●

Do not disassemble, recharge, heat or short the battery. Do

not throw a battery into a fire or water.

In case of battery leakage

●

Thoroughly wipe the battery liquid off the battery case and

insert new battery.

●

If any part of your body or clothing comes into contact with

battery liquid, wash it with plenty of water.

●

If battery liquid comes into contact with your eyes, wash

them with plenty of water and get immediate medical atten-

tion.

This pictograph intends to alert you to the pres-

ence of important operating instructions and

installation instructions. Failure to heed the

instructions may result in severe injury or death.

■

Read the operating instructions for the unit and all other com-

ponents of your car audio system carefully before using the

system. They contain instructions about how to use the sys-

tem in a safe and effective manner. Panasonic assumes no

responsibility for any problems resulting from failure to

observe the instructions given in this manual.

■

This manual uses pictographs to show you how to use the

product safely and to alert you to potential dangers resulting

from improper connections and operations. The meanings of

the pictographs are explained below. It is important that you

fully understand the meanings of the pictographs in order to

use this manual and the system properly.

Warning

This pictograph intends to alert you to the pres-

ence of important operating instructions and

installation instructions. Failure to heed the

instructions may result in injury or material dam-

age.

Caution

English

CQ-VD7001N CQ-VD7001N

English

Safety Information (continued) ComponentsNotes on Use

Note:

¡The number in parenthesis underneath each accessory

part name is the part number for maintenance and serv-

ice.

¡Accessories and their parts numbers are subject to mod-

ification without prior notice due to improvements.

8. Installation Hardware (screws,

cords, etc.)

(a Installation Instructions)

7. Warranty Card

Q’ty: 1

6. Installation Instructions

(YEFM293938)

Q’ty: 1

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

OO-OOOOO

5. Operating Instructions

(YEFM285662)

Q’ty: 1

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

OO-OOOOO

4. Wiping Cloth

(YEFX9991793)

Q’ty: 1

3. Lithium Battery (CR2025)

Q’t : 1

2. Remote Control Unit

(YEFX9995413)

Q’ty: 1

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST/ MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

1. LCD monitor/DVD player

Q’ty: 1

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

OPEN / CLOSE

CQ-VD7001N

TILT

TEXT

Liquid Crystal Panel

¡Storage temperature range: – 20 °C to 80 °C

When the liquid crystal panel reaches high temperatures

or low temperatures, chemical changes occur within the

liquid crystal panel which may cause malfunctions.

¡Do not strongly impact the liquid crystal panel.

¡When the temperature is very cold or very hot, the

image may not appear clearly or may move slowly. Also,

movement of the image may seem to be out of synchro-

nization or the image quality is not malfunction or prob-

lem.

¡Usage temperature range: 0 °C to 40 °C

There may be red spots, blue spots and green spots on

the panel surface. This is a characteristic of liquid crys-

tal panels and is not a problem. The liquid crystal panel

is built with very high precision technology and has at

least 99.99% effective image pixels. Be aware that on

0.01% of the panel there may be missing pixels or con-

stantly light pixels.

¡In order to protect the liquid crystal panel, keep it out of

direct sunlight while the unit is not in use.

¡Sudden changes in the temperature inside the car such

as those which occur immediately after the car's air

conditioner or heater has been turned on may cause

over due to water vapor or it may cause condensation

(droplets of water) to form and, as a result, the panel

may not work properly. Do not use the unit while these

symptoms are in evidence but leave the unit standing

for about and hour, and then resume or start use.

VAROITUS – LASER-

SÄTEILYVAARA

AVATTAESSA. VARO

ALTISTUMISTA

SÄTEELLE.

FÖRSIKTIGHET –

LASERSTRÅLNING I

ÖPPNAT LÄGE. UNDVIK

ATT UTSÄTTAS FÖR

STRÅLEN.

ADVARSEL – LASER-

STRÅLING. UNNGÅ

EKSPONERING FOR

STRÅLEN VED ÅPNING.

ÇçàåÄçàÖ – ãÄáÖêçéÖ

àáãìóÖçàÖ èêà

éíäêõíàà. àáÅÖÜÄíú

ÇéáÑÖâëíÇàü ãÄáÖêçéÉé

àáãìóÖçàü.

Label Indications and Their Locations

CAUTION

LASER RADIATION

WHEN OPEN.

DO NOT STARE INTO BEAM.

Caution:

This product utilizes a laser.

Use of controls or adjustments or performance of procedures other

than those specified herein may result in hazardous radiation expo-

sure.

Do not take apart this unit or attempt to make any changes

yourself.

This unit is a very intricate device that uses a laser pickup to retrieve

information from the surface of compact discs. The laser is carefully

shielded so that its rays remain inside the cabinet.

Therefore, never try to disassemble the player or alter any of its parts

since you may be exposed to laser rays and dangerous voltages.

CLASS 1 LASER PRODUCT

Caution Label

Deck Ass’y

(Upper Side)

CAUTION - LASER RA-

DIATION WHEN OPEN.

AVOID EXPOSURE TO

BEAM.

VORSICHT - LASER-

STRAHLUNG, WENN

GEÖFFNET. VERMEIDEN

SIE EIN AUSSETZEN

GEGENÜBER DEM

LASERSTRAHL.

ATTENTION –

RAYONNEMENT LASER

SI OUVERT, ÉVITER

TOUTE EXPOSITION AU

FAISCEAU.

ADVARSEL – LASER

UDSENDES NÅR DER

ER ÅBNET. UNDGÅ

UDSÆTTELSE FOR

STRÅLER.

Laser Product

Connection of side brake connecting lead

This system is designed so that you

cannot see moving pictures while you

are driving.

Park your car in a safe and pull the side brake

(parking brake) lever before watching the monitor.

A rear monitor (option) displays moving pictures

while driving.

Note:

Be sure to connect the side brake (parking brake)

connection lead. (a Installation Instructions)

CQ-VD7001N CQ-VD7001N

Features

English

Contents

¢ Safety Information .......................... 2

¢ Notes on Use................................................... 5

¢ Components.................................................... 5

¢ Features........................................................... 6

¢ Contents .......................................................... 7

¢ Preparation...................................... 8

¢ Name of Controls and Functions ................ 10

¢ Touch Panel Operation Overview................ 14

¢ General .......................................... 16

Before Disc Playback

..................... 18

Disc

Player..................................... 20

¢ Notes on MP3/WMA ...................................... 24

¢ Radio.............................................. 26

¢ RDS (Radio Data System) ............ 28

¢ VTR ................................................ 32

¢ AUX/Car Navigation System........ 33

¢ CD Changer Control ..................... 34

¢ DVD Changer Control................... 35

¢ Settings ......................................... 38

¢ Troubleshooting ........................... 53

¢ Maintenance .................................................. 58

¢ Notes on Discs.............................................. 59

¢ Language Code List...................................... 60

¢ Definition of Terms ....................................... 61

¢ Specifications................................................ 62

English 2

Deutsch 64

Français 126

Nederlands 188

Svenska 250

Italiano 312

Español 374

Dansk 436

Panasonic welcomes you to our constantly growing family

of electronic products owners.

We endeavor to give you the advantages of precise elec-

tronic and mechanical engineering, manufactured with

carefully selected components, and assembled by people

who are proud of the reputation their work has built for our

company. We know this product will bring you many hours

of enjoyment, and after you discover the quality, value and

reliability we have built into it, you too will be proud to be a

member of our family.

■ 5.1-channel Surround System

This unit has a built-in 4-channel amplifier. The procedure

for setting up a 5.1-channel surround system in order to

play DVD software in a way that creates a “you are there”

feel in a car is described below.

Note:

Even if you are using this unit without installing a center

speaker, surround speakers, or a subwoofer, it is still

necessary to make the speaker settings in order to

adjust the sound balance.

Panasonic

ENTER

TILT O/C

CQ-VD7001U

Panasonic

ENTER

TILT O/C

CQ-VD7001U

•

COLOR LCD MONITOR

VM1500

Panasonic

STAND BY (R)

ON (G)

Power amplifier

Front Speakers:

CJ-DVD177N

CQ-VD7001N

Center Speaker:

EAB-CF2

In-Dash 7” Widescreen Color LCD Monitor/DVD

Receiver

CQ-VD7001N

Surround Speakers:

CJ-SS162N

C CD Changer or

DVD Changer

B Car Navigation

System

Subwoofer:

CJ-HD303N

Camcorder (option):

(aInstallation Instructions)

C CD Changer:

CX-DP880N (option)

(aInstallation Instructions)

DVD Changer:

CX-DH801N (option)

(aInstallation Instructions)

Rear View Camera (option):

(aInstallation Instructions)

•

B Car Navigation System:

CN-DV2300N (option)

(aInstallation Instructions)

INTELLIGENT SYSTEM

BS G-CODE

POWER

VCR (option):

(aInstallation Instructions)

■ Advanced system

This unit can be combined with other components like

shown at right. For more details, refer to the operating

instructions for the connected devices.

Preparation:

The input/output signal setting of this unit should be the

same as the input/output signal setting (NTSC/PAL) of the

devises to be connected. Otherwise, pictures appear incor-

rectly.

OUTPUT:

Execute (TV type).

(

page 47, default )

INPUT:

Execute (PAL/NTSC selection).

(

page 49, default )

PAL

PAL/NTSC SELECT

PAL

TV TYPE

System Upgrade

Other Options

CQ-VD7001N

COLOR LCD MONITOR

VM1500

Panasonic

STAND BY (R)

ON (G)

A Rear Monitor:

e.g. CY-VM1500EX (option)

(aInstallation Instructions)

■ Integration of the monitor, FM/AM radio,

DVD Video/Video CD player and

CD/MP3/WMA player

■ Built-in AV Input/Output Terminals

For more convenient connection and setup, all termi-

nals are now provided on the unit itself.

■ Built-in Dolby Digital decoder, DTS decoder

You can enjoy a powerful 5.1 channel surround sys-

tem by connecting optional center speaker, power

amplifier and sub-woofer.

■ Built-in DSP

7 bands graphic equalizer. (

page 43)

■ GUI (Graphic User Interface)

GUI displays various indications with colorful symbols

to enhance visibility, enjoyment, and operability.

■ ID code

4-digit ID code for increased security.

■ CS Auto (Circle Surround Automotive)

CS Auto allows your car interior to change to a splen-

did audio room in a moment. Every speaker can be

fine-tuned. (

page 43)

*CS Auto, TruBass, FOCUS, SRS and symbol

are trademarks of SRS Labs, Inc.

CS Auto technology is incorporated under license

from SRS Labs. inc.

Note:

If you enable CS Auto, the following functions are

automatically disabled:

(Graphic-equalizer),

(Down mix), (Multiple Channel),

(Low pass filter/high pass filter).

■ Touch Panel Operation

Simply touch the screen lightly to operate virtually all

functions. Easy-to-use menus and icons let you

“touch and choose” what you want, so you can start

using your system from the very first day. That also

means that while you drive, you can concentrate on

the road.

■ DVD-R, DVD-RW Playback

(

page 18, 59 for details)

LPF/HPF

MULTI-CH

DOWN MIXGRAPHIC-EQ

A Rear Monitor

CQ-VD7001N CQ-VD7001N

Preparation

English

Pictographs

You can perform some operations of this unit in one or more methods with the touch panel or remote control. This book

explains such operations in tabular form as follows. Refer to the following for the pictographs located in the upper part of

each table.

Targeted operation

ACC selection

Execute (ACC setting). (

page 42)

ID Code

()(

page 41)

Clock

()

Clock (

page 40)

Screen

(/)

Dimmer/Contrast/Bright/Color/Tint (

page 42)

Monitor

()

Tilt (

page 40)

DVD

Language ( ) (

page 46)

Aspect ratio ( ) (

page 47)

DISPLAY

LANGUAGE

DISPLAY UNIT

PICTUREDIMMER

CLOCK

ID CODE

ACC SELECT

You may need to set the following depending on the

devices to be connected.

PAL/NTSC

Execute (TV type) (

page 47) and

(PAL/NTSC selection) (

page 49).

Rear monitor

Execute (Rear monitor set up). (

page

49)

Rear view camera

Execute (Rear view camera set up).

(

page 48)

Subwoofer

Execute (speaker set up) (

page 44) and

(speaker level) (

page 45).

Other speakers

Execute (speaker set up). (

page 44)

VTR/AUX (Camcorder,VCR, etc.)

Adjust (VTR/AUX input level).

(

page 45)

MODE LEVEL

SP SETUP

SP LEVEL

SP SETUP

CAMERA

REAR MONITOR

PAL/NTSC SELECT

TV TYPE

Remote Control Unit Symbols used in this manualSettings

w e r

Warning

¡When you connect external devices to Video Input

Terminal (VTR), be sure to connect the side brake

connection lead (aInstallation Instructions).

Warning

¡Keep batteries away from children to avoid the risk of

accidents. If an infant ingests a battery, please seek

immediate medical attention.

Caution

¡Remove and dispose of an old battery immediately.

¡Do not disassemble, heat or short a battery. Do not

throw a battery into a fire or water.

¡Follow local regulations when disposing of a battery.

¡Improper use of a battery may cause overheating, an

explosion or ignition, resulting in injury or a fire.

Note:

¡Battery Information:

Battery Type: Panasonic lithium battery (CR2025)

Battery Life: Approximately 6 months under normal use

(at room temperature)

Batteries Installation

(Inserting/Replacing the Battery)

q Remove the battery holder with the remote control unit

placed on a flat surface.

q Stick your thumbnail into the groove and push the

holder in the direction of the arrow at the same time.

w Pull it out in the direction of the arrow using a tough

pointed object.

Lithium battery

(CR2025: supplied)

Battery case

w Put a battery in the case with (+)-side facing up.

e Put the case back.

Back side

Tough pointed object

Disc Marks

q Compatible types of disc

The discs compatible with the targeted

operation.

w Operation on the Touch Panel

This is the operation with the touch panel

to perform the targeted operation. If the

operation is not executable with the touch

panel, “––” is displayed.

e Operation on the Remote Control Unit

This is the operation with the remote con-

trol to perform the targeted operation. If

the operation is not executable with the

remote control, “––” is displayed.

r Operation on the Unit

This is the operation with the Unit to per-

form the targeted operation. If the opera-

tion is not executable with the Unit, “––”

is displayed.

The following pictographs are used for the descriptions of

disc operation. (a page 19-23, 34-37)

: DVD

: VCD (Video CD)

: CD

: CD-R/RWs containing MP3 files

: CD-R/RWs containing WMA files

WMA

MP3

VCD

DVD

109

CQ-VD7001N CQ-VD7001N

Name of Controls and Functions

English

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

OPEN / CLOSE

CQ-VD7001N

TILT

TEXT

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001N

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

DVD Player

Disc slot Remote control

sensor

w [VOL]

e [MUTE]

r [MODE] (POWER)

(Display Closed)

(Display Raised)

t [TA]

Dimmer Sensor

(

, page 42)

DIMMER

!0 [TILT]

o [O/C] (OPEN/CLOSE)

i [}] [{] (DISC)

[] ][[ ] (TUNE/

TRACK)

[ENTER]

o [O/C] (OPEN/CLOSE)

!0 [TILT]

u [u] (EJECT)

q [ASP] (ASPECT)

(P•MODE)

q [ASP] (ASPECT)

(P•MODE)

e [A] (ASPECT) (P•MODE)

r [0] – [9]

t [MENU]

u [DISP]

o [}] [{] (VOL)

!0 [MUTE]

q [MODE]

y [NAVI] (NAVIGATION)

[

VOL

]

[

MUTE

]

[

]

[

] (EJECT)

[

ENTER

]

[

TILT

]

¡Adjusts the monitor position.

(a page 17, 40)

¡Tilts the monitor forward temporarily.

(a page 17)

¡Opens/closes the monitor. (a page 16)

[

O/C

]

(OPEN/CLOSE)

¡Selects a band. (a page 26)

¡Searches for broadcast stations and memo-

rizes them automatically. (a page 27)

¡Determines an operation or item.

¡Selects or searches for a track, file or

station. (a page 21, 26, 34)

¡Selects (horizontally) or adjusts an operation

or item.

[]] [[]

(TUNE/TRACK)

¡Selects a folder or a disc. (a page 21, 34,

35, 36)

¡Selects (vertically) or adjusts an operation or

item.

[}] [{]

(DISC)

¡Ejects/reloads a disc. (a page 19)

Note:

¡A disc is in the slot when this is illuminated

in blue. (a page 19)

¡Put navigation screen on the display.

(a page 33)

[

NAVI

]

(NAVIGATION)

¡Switches TA mode on and off. (a page 29)

¡Switches on/off the power. (a page 16)

¡Changes the modes such as sound and pic-

ture. (a page 16)

[MODE]

(POWER)

¡Mutes the sound temporarily.

(a page 17)

¡Adjusts the sound volume.

(a page 17)

¡Selects the aspect ratio. (a page 51)

¡Activates/inactivates the private mode.

(a page 52)

[ASP]

(ASPECT)

(P•MODE)

Aim the remote control at the remote control sensor of the display unit and operate it.

(a previous page).

y [NAVI] (NAVIGATION)

w [PWR] (POWER)

i [}] [{]

[]] [[]

[ENTER]

[

] to [

]

[

]

[

DISP

]

[

ENTER

]

[

MUTE

]

¡Mutes the sound temporarily. (a page 17)

¡Adjusts the sound volume. (a page 17)

[}] [{]

(VOL)

¡Selects a band. (a page 26)

¡Searches for broadcast stations and memo-

rizes them automatically. (a page 27)

¡Determines an operation or item.

¡Selects or searches for a frequency.

(a page 26)

¡Selects (horizontally) or adjusts an operation

or item.

[]] [[]

¡Selects (vertically) or adjusts an operation or

item.

[}] [{]

¡Changes the display.

¡Put navigation screen on the display.

(a page 33)

[

NAVI

]

(NAVIGATION)

¡Shows the menu screen. (a page 15, 38)

¡Sets the ID code. (a page 41)

¡Selects the aspect ratio. (a page 51)

¡Activates/inactivates the private mode.

(a page 52)

[A]

(ASPECT)

(P•MODE)

¡Switches the power on/off. (a page 16)

[PWR]

(POWER)

¡Switches the power on/off. (a page 16)

¡Changes the modes such as sound and pic-

ture. (a page 16)

[MODE]

Remote Control- General

1211

CQ-VD7001N CQ-VD7001N

Name of Controls and Functions (continued)

English

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

¡Changes the modes such as sound

and picture. (a page 16, 20, 35)

[MODE]

¡Determines an operation or item.

[ENTER]

¡Selects an operation or item.[}] [{]

[]] [[]

¡Repeats a playback. (a page 21,

35)

[REP]

¡Selects an item on the menu.

(a page 22, 36)

¡Selects a title or chapter.

(a page 22, 36)

[0] to [9]

¡Switching the audio language.

(a page 23, 37) [Only for DVD]

¡Switches between stereo or monau-

ral sound. (a page 23, 37)

[Only for

Video CD]

[AUDIO]

(ST/MONO)

¡Switching the angle. (a page 23,

37) [Only for DVD]

[ANGLE]

[

■

]

(STOP)

[

❚❚

]

(PAUSE)

[

]

(PLAY)

¡Switching the subtitle language.

(a page 23, 37) [Only for DVD]

[SUB] (SUB

TITLE)

¡Selects the title/chapter. (a page

22, 36) [Only for DVD]

[TITLE]

(TITLE/

CHAPTER)

¡Displays the DVD/title menu.

(Operations vary according to the

media.) (a page 22, 36)

[DVD] (DVD

MENU)

¡Returns to the previous display.

(a page 22, 36)

¡Inputs the number again.

(a page 22, 36)

¡Displays the video CD’s menu.

(a page 22, 36)

[RET]

(RETURN)

¡Goes to beginning. (a page 21, 35)

¡Fast forward/fast reverse.

(a page 21, 35)

¡Slow playback ([d]).

(a page 21, 36)

[

] [

]

(TRACK/SEARCH)

¡Playback (a page 21, 35)

¡Pause (a page 21, 35)

¡Stops playback. (a page 21, 35)

¡Changes modes such as sound and

picture. (a page 16, 20, 34, 35)

[MODE]

¡Selects a track or file. (a page 21,

34, 35)

¡Fast forward/fast reverse (a page

21, 34, 35)

[]] [[]

¡Scan play. (a page 21, 34, 36)

[SCAN]

¡Repeats a playback. (a page 21,

34, 36)

[REP]

¡Random play. (a page 21, 34, 36)

[RAND]

(RANDOM)

[

■

]

(STOP)

[

❚❚

]

(PAUSE)

[

]

(PLAY)

¡Selects a folder. (a page 21, 35)

¡Selects a disc. (a page 34, 36)

[Only for CD Changer/DVD

Changer]

[}] [{]

(DISC/

FOLDER)

¡Scrolls the title once. (a page 21,

34)

[SCRL]

(SCROLL)

¡Goes to beginning. (a page 21, 34,

35)

¡Fast forward/fast reverse.

(a page 21, 34, 35)

[

] [

]

(TRACK/

SEARCH)

¡Playback (a page 21, 35)

¡Pause (a page 21, 35)

¡Stops playback. (a page 21, 35)

Audio (CD, MP3/WMA, CD changer/DVD Changer)

[

■

]

(STOP)

[

❚❚

]

(PAUSE)

[

]

(PLAY)

[

] [

]

(TRACK/SEARCH)

[SUB] (SUBTITLE)

[ANGLE]

[AUDIO] (ST/MONO)

t [REP] (REPEAT)

[}] [{] []] [[]

[ENTER]

u [MODE]

r [0] – [9]

[RET] (RETURN)

[DVD] (DVD MENU)

[TITLE] (TITLE/CHAPTER)

[

■

]

(STOP)

[

❚❚

]

(PAUSE)

[

]

(PLAY)

[

] [

]

(TRACK/SEARCH)

[RAND] (RANDOM)

[SCAN]

[REP] (REPEAT)

[SCRL]

(SCROLL)

[}] [{] (DISC/FOLDER)

[]] [[]

[MODE]

Remote Control- Disc Player Remote Control- Disc Player

Videos (DVD, Video CD, DVD Changer)

1413

CQ-VD7001N CQ-VD7001N

Touch Panel Operation Overview

English

Prohibition

Input is not possible because the user has

attempted to perform an operation which

is not supported.

Additional Information

Source type, various settings, etc.

Note

Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.

Mode Button

Displays the mode selection screen (a next page).

DVD mode

Example: DVD mode

Example: Radio mode

Operating buttons

Operable touch buttons appear.

Showing the hidden part of the screen.

Some items have continued parts. You can see the

continued parts by pressing , , or .

Information of Each Mode

Playing elapsed time, title, etc.

The State of Operation Screen

Switching to the desired screen

Audio menu

❒ Notes on the Touch Panel

Before operation

¡Clean the surface of the touch panel. (a page 58)

Operation

¡Use only your fingers to operate the touch panel.

¡Do not press the panel forcefully.

¡Do not scratch the panel with fingernails or any hard

objects.

¡Do not use a pen or other sharp implements to oper-

ate the touch panel.

¡Do not bump the front panel.

a Failure to observe the above may damage or break

the glass on the surface of the touch panel.

Standard Screen Operation Screen

Touch/press

[DISP]

goes to Operation Screen

Touch/press

[DISP]

goes back to

Standard Screen

Mode Button

Touch for “Mode

Selection Screen”

Menu Button

Touch for “Menu

Screen”

Menu Button (a next page)

To switch Operation Screen ON, touch the center of touch panel or press [DISP] on the remote control. (Only for Video mode)

Mode Selection Screen appears.

Touch desired mode button.

Touch to quit.

touch/press

[DISP]

touch/press

[DISP]

touch/press

[DISP]

touch/press

[DISP]

Menu ScreenMode Selection Screen

Menu Screen appears. Select desired setting.

Menu Setting, (a page 38)

Press [MODE] to change to desired

mode.

VTR

(a page 32)

CD Changer, DVD Changer

(a page 34-37)

Radio/RDS

(a page 26-31)

Disc Player

(DVD/VCD/CD/MP3/WMA)

(a page 20-23)

Note

CD Changer and DVD Changer Mode are only selectable

when a CD Changer and DVD Changer is connected.

(AUX mode is selected when no CD Changer, DVD

Changer is connected)

¡If there is no external video sources connected,

VTR/AUX mode can be set to skip. (a page 48)

¡Refer to the description of each mode for how to operate

the operation screen.

Operations

q Press and hold for more than 2 seconds.

Press to adjust. Setup is the same as from

MENU. Refer to (display

unit) for details. (

page 40)

DISPLAY UNIT

Operations

DVD VTR

RADIO

CH-C

END

1615

CQ-VD7001N CQ-VD7001N

General

English

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001N

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

TILT O/C

ENTER

MUTE

MODE

[MUTE]

[O/C]

(OPEN/CLOSE)

[MODE] (POWER)

[TILT]

[]][[]

[VOL]

Remote Control Sensor

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

PWR MODE

MUTE

[PWR]

(POWER)

[MODE]

[MUTE]

[

}] [{]

[]] [[]

[MODE]

[PWR]

–

––

[]]

or [[]

–

[MODE]

(

page 15)

[MODE]

q [}]

w [

{]

q Up

w Down

General Operations

DVD VTR

RADIO

CH-C

END

Power

ON :

Mode selection

Volume

Note:

¡The sound level for

each source is

stored in memory.

[O/C]

(OPEN/CLOSE)

[TILT]

[]] or [[]

Press once to open. Press again to close.

To raise the display, press again.

Display Open/Close

Tilt Angle

Folding Down the

Display

Temporarily

[TILT]

Note:

¡When the display unit is opened or closed, a loud beep sounds three times.

¡If the unit stops halfway, press [O/C] (OPEN/CLOSE) again to draw it all the way in.

¡Opening/closing the display can be done when the power is off

().

ACC ON

Note:

You cannot turn on the power via the remote

control when is selected.

(

, page 42)

ACC SELECT

OFF

Mutes the sound.

To cancel, press again.

–

[MODE]

[PWR]

[MODE]

Power

OFF :

[MUTE] [MUTE]

Mute

Note:

Vertical angle (TILT) is saved in the memory, so when the display unit is drawn out

next, it is automatically set at the angle and in the position adjusted before.

¡After adjusting its angle, also adjust the brightness as well. (a page 42)

¡The car model and installation conditions may impose some restrictions on the adjust-

ment of the monitor's angle.

Note:

¡Even when the unit power is off, you can fold down the display te

mporarily.

Preparation: Turn your car’s ignition key to the ACC or ON position.

Setting Range: – 82 dB to 0 dB, default: – 40 dB

……

Touch/Press and hold for more than 2 seconds

Caution

¡Avoid physical shock to the monitor.

¡Do not place any object on the display unit, or subject it to undue force.

¡Do not move the display forcibly.

¡The monitor movable range may be limited by the type of car, the position where the

display is mounted, etc.

Warning

¡Do not touch the unit while the display is moving. Inserting hands, fingers or foreign

objects into the unit can cause injuries and damage to the unit.

RADIO (MW/LW/FM)

(a page 26)

(

a page 20)

(

a page 32)

(

a page 34)

(

a page 33)

VTR

CH-C (CD Changer Control)*

(a page 35)

CH-C (DVD Changer Control)*

AUX*

DVD (DVD/VCD (Video CD)/CD/MP3/WMA)

CD Changer and DVD Changer cannot be connected at once.

AUX appears when there is no connection to the DIN connector.

General Operations (continued)

¡Press and hold for more than 2 seconds.

1817

CQ-VD7001N CQ-VD7001N

Before Disc Playback

English

Discs that can be Played Back

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

OPEN / CLOSE

CQ-VD7001N

TILT

TEXT

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

OPEN / CLOSE

CQ-VD7001N

TILT

TEXT

[u] (EJECT)

lights.

Disc Insert

¡The mode that supports the disc is selected, and play-

back starts.

When a disc is in the player, change to disc player mode

(CD, MP3, WMA, DVD or VCD (Video CD)) and playback

starts.

Note:

¡Do not insert a disc when the eject button lights

because a disc is already loaded.

¡The power will be turned on automatically when a disc is

loaded.

¡You can play a disc even if the monitor is closed.

¡The sound may be interrupted for a few moments

while the audio format is being identified.

¡The audio format is automatically identified.

(a page 18)

¡When the menu screen appears, see “Chapter/title

Selection” on page 22.

DVDDVDDVD VCDVCDVCD CDCDCD MP3MP3MP3 WMAWMAWMA CH-C

Disc Eject

Press [u] to stop playback and eject the disc.

(Press

[u] again to reload the disc.)

Note:

¡If you leave a disc in the slot for more than 30 seconds

after its ejection, the disc will be automatically reloaded

after loud beep is energized three times.

Due to limitations of certain discs, some DVD and

VCD (Video CD) discs may not operate as described

in this manual. Refer to the disc jacket for further

details.

¡This unit does not support DVD and VCD (Video CD)

karaoke functions.

DVDDVDDVD VCDVCDVCD CDCDCD MP3MP3MP3 WMAWMAWMA CH-C

DVD

DVD VCD

VCD

CD MP3 WMA CH-C

DVD

DVD VCD

VCD

CD MP3 WMA CH-C

DVD

DVD VCD

VCD

CD MP3 WMA CH-C

■ When a disc is in the player...

Do not insert a disc when the eject button lights

because a disc is already loaded.

Printed side

Disc Insert/Eject

Caution

¡Do not use irregularly shaped discs.

¡Do not insert foreign object into the disc slot.

Caution

¡When the disc is inserted or ejected, to prevent disc

scratches never exert any downward force on the disc.

❒ Symbols used on jackets

(Examples of such symbols include)

: Number of subtitle languages

¡ : Number of audio tracks

¡ : Number of angles

The numbers indicate the number of languages,

tracks, angles, etc., recorded on the disc.

Screen size (H:V aspect ratio)

¡ : 4:3 standard size

¡ : Letterbox (a page 47)

¡ 16:9 wide size

: Playback in letterbox format on a stan-

dard screen (4:3).

: Playback in (pan and scan)

(a page 47) format on a standard

screen (4:3).

Note:

The size of the image that is displayed on the screen

depends on the screen mode (“Aspect Ratio”

page

51), and on the screen size for the content on the disc.

❒ Region Management Information

This product is designed and manufactured to

respond to the Region Management Information that

is recorded on a DVD disc. If the Region number

described on the DVD disc does not correspond to the

Region number of this product, this product does not

play the disc.

The Region number for this product is “2” and

“ALL”.

PAN & SCAN

PS16

LB16

❒ Disc Type

ALL

Example:

TEXT

Recordable

ReWritable

DISC DVD

VCD

(Video CD)

CD CD-R/RW

Mark/logo

Disc Size 12 cm

Video

Format

PAL

Audio

Format

LPCM,

MPEG1,

MPEG2,

dts, Dolby

Digital

LPCM,

MPEG1

LPCM

(CD-DA),

dts

LPCM

(CD-DA),

MP3/WMA

Region

No.

ALL

❒ Notes on DVD-R, DVD-RW

¡Only video formatted discs are playable. Discs in the

video recording (VR) format are unplayable.

¡Unfinalized discs are unplayable.

¡Some discs are unplayable depending on the disc itself,

device, drive and software that are used for disc record-

ing.

❒ Discs not supported

The following discs are not played back on this product.

¡DVD-Audio ¡DVD-ROM ¡DVD-RAM

¡DVD+R ¡DVD+RW

¡SVCD ¡VSD ¡CVD

¡CD-G ¡CD-ROM (except MP3/WMA)

¡CD-RW (except MP3/WMA and CD-DA)

¡CD-R (except MP3/WMA and CD-DA)

¡SACD ¡Photo CD ¡CDV

¡Hybrid SACD (except CD-DA)

¡Divx Video Discs

¡CD-EXTRA (audio-only playback possible)

¡DVDs with a region number other than “2” or “ALL”

¡Playing back a photo CD disc with this unit could

damage the data that is recorded on the disc.

Note:

¡About CD-Rs/RWs, DVD-Rs/RWs, refer to “Notes on CD-

Rs/RWs, DVD-Rs/RWs”. (a page 59)

¡Some copy-protected music CDs are not playable.

2019

CQ-VD7001N CQ-VD7001N

Disc Player

English

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

CQ-VD7001N

TEXT

ENTER

MODE

[MODE]

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

MODE

DISP

RAND

SCAN REP

SCRL

1 2 3

4 5 6

7 8

[3] [y] [5]

[s] [d]

[MODE]

[]] [[] [}] [{]

[RAND]

[REP]

[}] [{]

[DISP]

[SCAN]

[0] – [9]

[SCRL]

Disc Mode (DVD) Selection

Video Mode

Touch

“

Mode Button

”

. (

page 15)

Touch (DVD) on the Mode

Selection Screen.

Press

[MODE]

to change to the desired

mode.

DVD VTR

RADIO

CH-C

END

DVD mode display

VCD (Video CD) mode display

Mode Button Playing time

Operation Buttons

To switch Operation Screen ON, touch the center of touch

panel or press [DISP] on the remote control.

(Only for

Video Mode)

Mode Button Playing time

Operation Buttons

❒ Folder/File/Track Selection

q Touch (folder name) to select

a folder.

, : scrolls up/down the file list by 1

page.

, : scrolls up/down the file list by 1

line.

w Touch (file name) to play.

q Press []], [[], [}] or [{] to select a

folder.

[]][[]: movement among different levels

of trees

[}][{]: movement in the same tree

w Press [ENTER].

DVD VTR

RADIO

CH-C

END

: Folder

: MP3/WMA file

Note:

¡It is not possible to display the whole tree and file list in

a folder.

¡The displayed contents on the touch panel vary with cir-

cumstances.

CD mode display

MP3/WMA mode display

Audio Mode

Mode Button Playing time

Operation Buttons

Title/text scroll

Folder selection

Mode Button Current track Playing time

Operation Buttons

Title/text scroll

(Example: MP3 mode)

……

Touch/Press and hold

Operations

DVD VTR

RADIO

CH-C

END

WMA

WMAMP3

MP3

VCD

DVD

Compatible

Discs

Compatible

Discs

Geeignete

Discs

Disques

compatibles

Geschikte

discs

Kompatibla

skivor

Dischi

compatibili

Discos

compatibles

Kompatible

disks

DVD

Track/file Selection

Fast Forward/

Fast Reverse

Note:

¡When playing a DVD, there are cases where it is not possible to return to the

start of a chapter that spans 2 titles. (a page 61)

WMA

WMAMP3

MP3

CDCDCD

VCD

DVD

VCD

DVD

The speed changes if the button is held down as follows.

Regular speed /1.5 times (DVD) /10 times (DVD) /20 times

Folder Selection

Title Scroll

WMA

WMAMP3

MP3

WMA

WMAMP3

MP3

Stop

WMA

WMAMP3

MP3

CDCDCD

VCD

DVD

To resume playback, touch/press

/ [5].

Pause

WMA

WMAMP3

MP3

CDCDCD

VCD

DVD

Slow Playback

VCD

DVD

Repeat Play

WMA

WMAMP3

MP3

CDCDCD

VCD

DVD

Repeat Play within the

Current Folder

WMA

WMAMP3

MP3

To resume playback, touch/press again

or touch/press / [5].

Note:

¡Reverse slow playback is not possible.

Scan Play

CDCDCD

Random Play

WMA

WMAMP3

MP3

CDCDCD

Random Play within the

Current Folder

WMA

WMAMP3

MP3

[d]

[s]

[}]

–

[{]

[}]

[{]

[SCRL]

[3]

[y]

[d]

[[]

Next track/file

Beginning of the current track/file

Previous track/file (Touch/press twice.)

[]]

[d]

[s]

[[]

Fast forward

Release to resume playback.

Fast reverse

Release to resume playback.

Next folder

Scrolls the title once

Previous folder

[]]

Touch

desired

folder

–

[REP]

Basic Operations

¡Touch/press and hold in the pause mode.

Playback is at about 1/3 normal speed.

To resume normal playback,

touch/press

/ [5].

To cancel, touch/press again.

To cancel, touch/press and hold for more

than 2 seconds again.

–

[REP]

To cancel, touch/press again.

–

[SCAN]

To cancel, touch/press again.

–

[RAND]

To cancel, touch/press and hold again.

–

[RAND]

Touch panel symbols will change to indicate these current mode. , {F= FOLDER (folder)}

2221

CQ-VD7001N CQ-VD7001N

Disc Player (continued)

English

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

DISP

RETDVD

1 2 3

4 5 6

7 8

SUB

ANGLE

AUDIO

TITLE

[SUB]

[TITLE]

[]] [[] [}] [{]

[ENTER]

[0] – [9]

[DISP]

[DVD]

[RET]

[ANGLE]

[AUDIO]

Note:

If no operation is performed for 10 seconds or /

[DISP]

is touched/pressed, the operation buttons disappear.

It may not be possible to switch the language unless the unit is at the DVD menu (

previous page) or is at the DVD set-

tings. (

page 46)

The language on the DVD settings takes priority when the power is turned on or the disc is loaded.

The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan-

guage/angle.

Operations

DVD VTR

RADIO

CH-C

END

Compatible

Discs

Compatible

Discs

Geeignete

Discs

Disques

compatibles

Geschikte

discs

Kompatibla

skivor

Dischi

compatibili

Discos

compatibles

Kompatible

disks

DVD

Subtitle Language

It is possible to change the subtitle language during play if multiple languages

are recorded on the disc.

Note:

¡There may be a brief delay before the subtitles appear.

DVDDVDDVD

Audio Language

It is possible to change the audio language during play if multiple audio lan-

guages are recorded on the disc.

It is possible to switch the audio between stereo sound and monaural sound (L

or R).

DVDDVDDVD

Angle

For DVDs which contain scenes which have been shot simultaneously from a

number of different angles the same scene can be viewed from each of these

different angles during play.

VCDVCDVCD

Stereo & Monaural

: stereo sound

: the left channel audio is output on both the left and right

speakers.

: the right channel audio is output on both the left and right

speakers.

MONO.R

MONO.L

STEREO

[SUB] – ¡Touch/press during playback.

[AUDIO] – ¡Touch/press during playback.

[ANGLE] – ¡Touch/press during playback.

[AUDIO] –

Useful Function

To switch Operation Screen ON, touch the center of touch panel or press [DISP] on the remote control.

DVD mode display

Note:

¡For VCD mode, press the numerical key to enter a number directly.

¡If no operation is performed for 8 seconds after you have touched [TITLE], the operation buttons disappear.

¡If the title/chapter number is inputted and no operation is performed for 2 seconds, playback will start from the number

of the title/chapter entered.

On-Screen Direct Operation (Only for DVD)

Some DVDs allow you to operate the DVD menu by touch-

ing the screen.

In such a case, if your targeted button is located too close

to other buttons, a part of the screen may be enlarged in

order that you can press the button for sure.

Note:

¡When the current disc is not ready for the on-screen

direct operation, perform operations with the buttons on

the remote control or the unit.

¡The on-screen direct operation of the DVD menu is not

available in the DVD changer mode.

Moving operation buttons (Only for DVD)

When the operation buttons interfere with operations,

press . The buttons are transferred as shown below.

Showing Mode button and Menu button

Press . The Mode button and Menu button appear.

Mode button

(a page 15)

Menu button

(a page 15)

Operations

DVD VTR

RADIO

CH-C

END

CompatibleCompatible

DiscsDiscs

Compatible

Discs

Geeignete

Discs

Disques

compatibles

Geschikte

discs

Kompatibla

skivor

Dischi

compatibili

Discos

compatibles

Kompatible

disks

VCD

DVD

Showing menu and

selecting an item

[DVD]

[RET]*

–

[]] [[]

[}] [{]

–*

–

[]] [[]

[}] [{]

[ENTER]

[RET]

–

q Menu appears.

w Select the desired item.

e Determine the setting.

ddd

Returns to the previous display.

q Toggles “Chapter number input

mode” and “title number input mode”.

w Input desired number.

e Playback starts.

Starting Playback

from a specific

chapter/title

Note:

For retrying selection during number entry, touch/press /

[RET]

Note on VCD:

For VCD, touch/press

[RET]

instead of

[DVD]

Touch the numerical

key to enter a number

directly

[TITLE]

[0] to [9]

[ENTER]

DVD

Chapter/title Selection

2423

CQ-VD7001N CQ-VD7001N

Notes on MP3/WMA

English

1 8

–

What is MP3/WMA?

MP3 (MPEG Audio Layer-3) and WMA (Windows Media

Audio)

are the compression formats of digital audio. The former is

developed by MPEG (Motion Picture Experts Group), and the

latter is developed by Microsoft Corporation. Using these

compression formats, you can record the contents of about 10

music CDs on a single CD (This figure refers to data recorded on

a 650 MB CD-R or CD-RW at a fixed bit rate of 128 kbps and a

sampling frequency of 44.1 kHz).

Note:

¡ MP3/WMA encoding and CD writing software programs are

not supplied with this unit.

Points to remember when making MP3/WMA files

Common

¡ High bit rate and high sampling frequency are recommended

for high quality sound.

¡ Selecting VBR (Variable Bit Rate) is not recommended

because playing time is not displayed properly and sound

may be skipped.

¡ The playback sound quality differs depending on the encoding

circumstances. For details, refer to the instructions of your

own encoding software and writing software.

MP3

¡ It is recommended to set the bit rate to “128 kbps or more”

and “fixed”.

WMA

¡ It is recommended to set the bit rate to “64 kbps or more”

and “fixed”.

¡Do not set the copy protection on the WMA file to enable this

unit to play back.

Display Information

Displayed items

Displayable characters

¡ Displayable length of file name/folder name: within 64 charac-

ters.

¡ Name files and folders in accordance with the standard of

each file system. Refer to the instructions of writing software

for details.

¡ ASCII character set and special characters in each language

can be displayed.

ASCII character set

A to Z, a to z, digits 0 to 9, and the following symbols:

(space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | }

Note:

¡ With some software in which MP3/WMA format files have

been encoded, the character information may not be dis-

played properly.

¡ Undisplayable characters and symbols will be converted into

an asterisk (

¡It is recommended that the length of the file name is less than

8 (excluding the file extension).

¡ CD-TEXT

Disc title

Track title

¡ MP3/WMA

Folder name

File name

¡ MP3 (ID3 tag)

Album name

Title and artist name

¡ WMA (WMA tag)

Album name

Title and artist name

Caution

¡Never assign the “.mp3”, or “.wma” file name

extension to a file that is not in the MP3/WMA

format. This may not only produce noise from

the speaker damage, but also damage your

hearing.

¡ You are recommended to minimize the chances of making a

disc that contains both CD-DA files and MP3/WMA files.

¡ If CD-DA files are on the same disc as MP3 or WMA files,

the songs may not play in the intended order, or some

songs may not play at all.

¡ When storing MP3 data and WMA data on the same disc,

use different folders for each data.

¡ Do not record files other than MP3/WMA files and unneces-

sary folder on a disc.

¡ The name of an MP3/WMA file should be added by rules as

shown in the following descriptions and also comply with the

rules of each file system.

¡ The file extension “.mp3” or “.wma” should be assigned to

each file depending on the file format.

¡ You may encounter trouble in playing MP3/WMA files or dis-

playing the information of MP3/WMA files recorded with cer-

tain writing software or CD recorders.

¡ This unit does not have a play list function.

¡ Although Multi-session recording is supported, the use of

Disc-at-Once is recommended.

Supported file systems

ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet,

Romeo

Note:

¡ Apple HFS, UDF 1.50, Mix CD and CD Extra are not supported.

Recording MP3/WMA files on a CD-media

Folder selection order/file playback order

Maximum number of files/folders

¡ Maximum number of files: 512

¡ Maximum number of files in one folder: 255

¡ Maximum depth of trees: 8

¡ Maximum number of folders: 255 (Root folder is included.)

Note:

¡ This unit counts the number of folders irrespective of the presence or

absence of an MP3/WMA file.

¡ If the selected folder does not contain any MP3/WMA files, the near-

est MP3/WMA files in the order of playback will be played.

¡ Playback order may be different from other MP3/WMA players even if

the same disc is used.

¡ “ROOT” appears when displaying the root folder name.

It is prohibited by copyright laws to copy, distribute and deliver

copyrighted materials such as music without the approval of

No warranty

Above description complies with our investigations as of

December 2004. It has no warranty for reproducibility and

displayability of MP3/WMA.

Recording MP3/WMA files on a CD-media

32, 44.1, 48 kHzNo64 k – 192 kbpsWindows Media Audio Ver. 2, 8

16, 22.05, 24 kHzYes8 k – 160 kbpsMPEG 2 audio layer 3 (MP3)

32, 44.1, 48 kHzYes32 k – 320 kbpsMPEG 1 audio layer 3 (MP3)

Sampling frequencyVBRBit rateCompression method

Compression formats (Recommendation: “Points to remember when making MP3/WMA files” on the previous page)

Windows Media, and the

Windows logo are trademarks,

or registered trademarks of

Microsoft Corporation in the

United States and/or other

countries.

Root Folder

(Root Directory)

Folder Selection

In the order

File Selection

In the order

Tree 1 Tree 2 Tree 3 Tree 4

Tree 8

(Max.)

2625

CQ-VD7001N CQ-VD7001N

Radio

English

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

OPEN / CLOSE

CQ-VD7001N

TILT

TEXT

ENTER

MODE

Frequency

Preset stations

Indicates the

intensity of the

radio wave.

Auto presetting

Stereo Indicator

Band

selection

List

selection

Tuning

[MODE]

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

MODE

1 2 3

4 5 6

[]] [[]

[ENTER]

[MODE]

[]] [[] [ENTER]

[1] – [6]

[ENTER] [ENTER]

Operations

DVD VTR

RADIO

CH-C

END

Band Selection

List Selection

Refer to the next page.

Station

Selection

Seek Tuning

Radio Mode Selection

Touch

“

Mode Button

”

. (

page 15)

Touch (RADIO) on the Mode

Selection Screen.

Press

[MODE]

to change to the desired

mode.

DVD VTR

RADIO

CH-C

END

……

Touch/Press and hold

……

Touch/Press and hold

[

][

[

] Up

[

]

][

]

] Down

[

][

[

] Up

[

]

][

]

] Down

Touch/press and hold for more than 0.5 second then release. Seeking starts.

FM 1 FM 2 FM 3 AM

Mode Button (a page 15)

Manual Preset

Memory

Up to 6 stations can be

preset in each band.

Preset Station

Calling

CH1

Auto Preset

Memory

6 stations with first to 6th highest in signal

strength of each band will be preset.

[ENTER]

CH1

Preset Swap

q Select the list and the preset number that contains the channel to be interchanged

(see “Preset station calling” above).

w Select the list and hold down the preset number that contains the targeted channel for

more than 2 seconds.

The preset channel selected in the step q is

interchanged with the targeted preset chan-

nel selected in the step w (Preset Swap).

Select a band and frequency.

¡Touch/press and hold for more than 2 seconds.

¡The frequency blinks once, and a receiving station is saved in the memory.

New stations overwrite existing saved stations.

¡Touch/press and hold for more than 2 seconds.

¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning)

New stations overwrite existing saved channels.

¡Touch/press and hold for more than 2 seconds.

¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning)

New stations overwrite existing saved channels.

Note:

¡ Only RDS stations will be saved at default setting (AF ON). To select non-RDS stations,

set AF to OFF. (a page 29)

Note:

¡ Only RDS stations will be saved at default setting (AF ON). To select non-RDS stations,

set AF to OFF. (a page 29)

[ENTER]

In total 18 FM stations are

automatically preset.

A channel preset is inter-

changeable with another

channel preset.

–

[ENTER]

–

Six stations are automati-

cally preset in each band.

[1]

[6]

[ENTER] [ENTER]

LIST 1 LIST 2 LIST 3 AM

There are 6 stations in each list. You can call up next 6 stations by switching from one list

to another.

From the touch panel, you can toggle only Lists 1-3, but not (MW/LW). To change

to (MW/LW), touch/press /

[ENTER]

Tuning

Preset Memory

blinks once

Select a band.

Select a band or a list.

¡Touch/press desired preset button.

stations with first to 18th highest in signal

strength of all FMs will be preset at once.

The displayed contents on the

touch panel vary with circum-

stances.

The displayed contents on the

touch panel vary with circum-

stances.

Preparation:

Select (all). (

page 50)

ee e e

ALLEACH

AUTO PRESET

FM SETUPRADIOMENU

ALL

Preparation:

Select (each). (

page 50)

ee e e

ALLEACH

AUTO PRESET

FM SETUPRADIOMENU

EACH

Preparation:

Select (all). (

page 50)

ee e e

ALLEACH

AUTO PRESET

FM SETUPRADIOMENU

ALL

Preparation:

Select (all). (

page 50)

ee e e

ALLEACH

AUTO PRESET

FM SETUPRADIOMENU

ALL

Appears when (all) is selected. (

page 50)

ee e e

ALLEACH

AUTO PRESET

FM SETUPRADIOMENU

ALL

CQ-VD7001N

English

CQ-VD7001N

RDS (Radio Data System)

English

Some FM stations are broadcasting added data compatible

with RDS. This radio set offers convenient functions using

such data.

RDS service availability varies with areas. Please under-

stand if RDS service is not available in your area, the fol-

lowing service is not available, either. This chapter explains

the summary and operation regarding RDS.

The following functions are available when receiving RDS

stations.

Programme Service Name (PS) Display

The name of the station is displayed.

Alternative Frequency (AF)

When reception is poor, an RDS station broadcasting the

same programme is tuned in automatically.

Traffic Programme (TP)

Some RDS FM stations periodically provide a traffic

announcement.

Stations which broadcast the traffic announcement are

called Traffic Programme (TP).

Traffic Announcement (TA)

Radio announcements on traffic conditions.

Clock Time (CT) Service

When receiving an RDS station, the CT service automatical-

ly adjusts the time. (

a Page 40 for Clock Setting)

Programme Type (PTY) Display

RDS FM stations provide a programme type identification

signal.

Example: news, rock, classical music, etc. (

a page 30)

Programme Identification (PI)

Each programme has its own number. This may be used to

search for another frequency on which the same pro-

gramme is broadcast.

Region (REG)

Each region has its own number. This may be used to

identify the region where the station you are now listening

to is located.

Enhanced Other Networks (EON)

When EON data is received, the EON indicator lights and

the TA and AF functions are expanded as follows.

TA: Traffic information from the current and other network

stations can be received.

AF: The frequency list of preset RDS stations is updated

by EON data.

EON enables the radio to make fuller use of RDS informa-

tion. It constantly updates the AF list of preset stations,

including the one that is currently tuned in to. For exam-

ple, if you preset a station far from home, you will later be

able to receive the same station at an alternative frequency,

or another station serving the same programme. EON also

keeps track of locally available TP stations for quick recep-

tion.

Emergency Announcement Reception

When an emergency announcement is broadcast, the unit

is automatically switched to receiving that broadcast (Even

when in the CD mode or MP3/WMA mode). During receiv-

ing the emergency announcement, “ALARM” appears on

the display.

Note:

¡Emergency announcements are broadcast at the TA vol-

ume level. (

a page 31)

Press [TA] to switch TA mode as follows.

[TA]

(Only for the button [TA] on the player)

The following functions are available when the TA mode is

active.

¡A TP (Traffic program) station is automatically searched

for and received at the instant of toggling the TA mode

on if you are receiving a non-TP station.

¡When executing station search or APM, only TP stations

are selected.

¡Setting to TA on with the unit in another mode, it will

automatically switch to radio mode and output the traf-

fic announcement when the traffic announcement

begins. The traffic announcement having finished, the

unit will return to the previous mode (TA Standby Mode

(Except in the case of the menu screen)).

For listening to only traffic information, activate TA and set

the volume to 0 in FM mode.

Once traffic information starts, the volume changes to the

TA volume. (a page 31)

Note

Traffic information is available in monaural.

Traffic Information Only (TA Mute)

The following functions are available when the AF mode is

active.

¡When receiving conditions become bad, a station with

better receiving conditions is automatically tuned in to.

¡When executing APM, only RDS stations are selected.

¡When calling up a preset station, a best receiving sta-

tion is selected automatically. (BSR Best Stations

Research)

If reception becomes poor when tuning in a preset station,

press the same preset number button. The same station

with better reception will be searched for.

Press the same preset number button again to cancel.

Note

For PI Seek, cancel the TA mode first, then execute PI

Seek.

PI Seek

(Program Identification Seek)

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

OPEN / CLOSE

CQ-VD7001N

TILT

TEXT

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

OPEN / CLOSE

CQ-VD7001N

TILT

TEXT

ENTER

Touch to switch AF mode as follows.

Current state

PTY/PS display

PTY preset

AF on/off setting

PTY on/off setting

[

]

][

[

]

[ENTER]

[

]

][

[

]

[ENTER]

[1]

–

[6]

[TA]

RDS Basics

TA on/off

AF on/off

Other RDS functions

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

1 2 3

4 5 6

❏ Traffic Announcement (TA)

❏ AF (Alternative Frequency)

: Receive traffic programs automatically.

: TA is not active.

TA OFF

TA ON

: AF, Best Station Research and PI

seek function are active.

: When the AF network of an RDS

station is not required.

AF OFF

AF ON

AF on/off setting*

*The displayed contents on the touch panel vary with cir-

cumstances.

Note

The setup is the same way as the one from the MENU.

(a page 31)

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

OPEN / CLOSE

CQ-VD7001N

TILT

TEXT

ENTER

CQ-VD7001N

English

CQ-VD7001N

RDS (Radio Data System) (continued)

English

Example: Radio mode

Refer to “Settings” for further information regarding other items on the menu. (a page 38)

RDS SETUP

Setting for RDS (Radio Data System)

: When the AF network of an RDS station is

not required.

: AF, Best Station Research and PI seek

function are active.

default:

: The frequency is changed for programs

from unlimited regions.

: The frequency is changed only for pro-

grams within the region.

default:

: down, : up

Setting range: – 82 dB to 0 dB

default: – 40 dB

[

]

(Volume level for traffic

announcement)

TA VOLUME

OFF

(Region)

REGION

OFF

(Alternative frequency)

: PTY is not active.

: PTY display mode

The following functions are activated.

: Language selection of PTY display

(

below)

default:

Note:

When PTY is activated, band switching can not be per-

formed. If it is necessary to switch the band, inactivate

PTY.

: English

: German

: Dutch

: Spanish

: French

: Swedish

: Italian

default:

ENGLISH

ITALIANO

SVENSKA

FRANÇAIS

ESPAÑOL

NEDERLANDS

DEUTSCH

ENGLISH

(Language selection of PTY

display)

PTY LANGUAGE

OFF

PTY LANGUAGE

LANGUAGE

OFF

(PTY on/off setting)

PTY

❏ MENU Operation on RDS

Opening the RDS menu

[

]

][

[

]

[ENTER]

PTY Preset Call

Program types are stored in memory under the preset but-

tons [1] to [6] shown in the table below.

To tune in to the desired program type, press any of the

preset buttons [1] to [6].

PTY Preset Memory

q Select a program type.

w Press and hold one of the preset buttons [1] to [6] for

more than 2 seconds to store in the memory.

Preset PTY Search

If a preset call has failed, search the program type station

as follows.

q Select a desired program type by PTY preset call.

w The preset program type appears on the display for 5

seconds.

e Press the same preset button again (or hold [ENTER]

for more than 2 seconds) to tune in to the desired pro-

gram type station.

PTY Contents

1 News News

2 SPEECH Current Affairs, Information, Education, Drama,

Cultures, Science, Varied Speech, Weather &

Metr, Finance, Children’s Progs, Social Affairs,

Religion, Phone In, Travel & Touring, Leisure &

Hobby, Documentary

3 Sport Sport

4 Pop M Pop Music

5 Classics Serious Classics

6 MUSIC Rock Music, Easy Listening, Light Classics M,

Other Music, Jazz Music, Country Music,

National Music, Oldies Music, Folk Music

[

]

][

[

]

[ENTER]

[1]

–

[6]

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

1 2 3

4 5 6

❏ PTY (Program Type)

Touch .

Touch/press

, /

[

]

[

]

to select a PTY.

w Press and hold [ENTER] on the remote control or

DVD player. Search starts.

Note

To stop searching, press [ENTER].

¡When there is no corresponding program type station,

“NONE” is displayed.

Note

When PTY is activated, band switching can not be per-

formed. If it is necessary to switch the band, inactivate

PTY.

¡The setup is the same way as the one from the MENU.

(a page 31)

Detailed PTY Selection

SPEECH / MUSIC / NEWS /

Current Affairs

Information / Sport / Education / Drama /

Cultures / Science /

Varied Speech

/ Pop Music /

Rock Music /

Easy Listening

Light Classics M

Serious Classics

Other Music /

Weather & Metr

/ Finance /

Children’s Progs

Social Affairs / Religion / Phone In /

Travel & Touring

Leisure & Hobby

/ Jazz Music / Country Music/

National Music

Oldies Music / Folk Music / Documentary

PTY on/off

Touch to switch PTY ON/OFF.

: PTY display mode

The following functions are activated.

: PTY is not active.

PTY OFF

PTY ON

PTY/PS display

PTY preset

PTY on/off setting

English

3231

CQ-VD7001N CQ-VD7001N

English

VTR AUX/Car Navigation System

ENTER

TILT O/C

ASP

MUTE

MODE MENU

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

OPEN / CLOSE

CQ-VD7001U

TILT

TEXT

TUNE /

TRACK

MODE

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

MODE

DISP

Touch

“

Mode Button

”

. (

page 15)

Touch (VTR) on the Mode Selection

Screen.

Press

[MODE]

to change to the

desired mode.

DVD VTR

RADIO

CH-C

END

Preparation:

¡Connect an optional external device to the unit.

VTR Mode Selection

You can view the images and listen to the sounds from the connected external devices in the VTR mode respectively.

Note:

You can set up the system so that the VTR mode is not

selected (mode skip). (

page 48) (VTR set to NAVI INPUT

is not skipped even if (mode skip) is set to

(on).)

If no operation is performed for 10 seconds or /

[DISP]

is touched/pressed, the operation buttons disappear.

VTR terminal is not used for the Panasonic car navigation

system (CN-DV2300N, option). Refer to

(Navigation Setup)

for setting. (

page 48)

NAVI SETUP

ONMODE SKIP

[MODE]

[DISP]

[MODE]

Touch

“

Mode Button

”

. (

page 15)

Touch (AUX) on the Mode Selection

Screen.

Press

[MODE]

to change to the

desired mode.

DVD VTR

RADIO

CH-C

END

Preparation:

¡Connect an optional external device to the unit.

AUX Mode Selection

You can view the images and listen to the sounds from the

connected external devices in the AUX mode respectively.

Note:

You can set up the system so that the AUX mode is not

selected

(mode skip)

. (

page 48)

Press [NAVI] to change to the car

navigation mode.

Press [NAVI] again to cancel.

Preparation:

Specify the correct terminal that is connected to the

car navigation system in the (Navigation

Input). (

page 48)

NAVI INPUT

Car Navigation Mode Selection

Note:

If the navigation mode is ON, only the audio signal is

switched while the video signal remains as it is.

The mode can be changed even when the display unit is

in the retracted position.

The volume of the voice guidance from the car naviga-

tion system can be set.

(

page 48)

Mode Button (a page 15)

ENTER

TILT O/C

ASP

MUTE

MODE MENU

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

OPEN / CLOSE

CQ-VD7001U

TILT

TEXT

TUNE /

TRACK

MODE

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

MODE NAVI

[NAVI]

[MODE]

[MODE] [NAVI]

Mode Button (a page 15)

To switch Operation Screen ON, touch the center of touch panel or press [DISP] on the remote control.

Connecting with Panasonic Car Navigation System

(e.g. CN-DV2300N, option)

Connect a Panasonic car navigation system to RGB

connector. (a page 48, Installation Instructions)

CQ-VD7001N

English

CQ-VD7001N

CD Changer Control DVD Changer Control

English

Operations

Track Selection

Basic Operations

DVD VTR

RADIO

CH-C

END

[d][[] Next track

[s][]]

Beginning of the current track

Previous track (Touch/press twice.)

Disc Selection

[}][}] Next disc

[

{][{] Previous disc

Fast Forward/

Fast Reverse

Repeat Play

Repeat Play within the

current Disc

Scan Play

Random Play

Random Play within the

Current Disc

[d][[]

[s][]]

Fast reverse

Release to resume playback.

Fast forward

Release to resume playback.

[REP]

–

[SCAN]

[RAND]

[REP]

To cancel, touch/press and hold for

more than 2 seconds again.

To cancel, touch/press again.

To cancel, touch/press and hold for

more than 2 seconds again.

To cancel, touch/press again.

Disc Scan Play

–

[SCAN]

The first 10 seconds of the all the discs is played.

To cancel, touch/press and hold for more than 2

seconds again.

CD Changer Mode Selection

Touch

“

Mode Button

”

. (

page 15)

Touch (CH-C) on the Mode Selection

Screen.

Press

[MODE]

to change to the desired

mode.

DVD VTR

RADIO

CH-C

END

¡CD changer functions are designed for optional

Panasonic CD changer unit. (CX-DP880N)

Preparation:

¡Connect the CD changer, and load a magazine (discs).

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

OPEN / CLOSE

CQ-VD7001N

TILT

TEXT

ENTER

MODE

Disc/folder

selection

Operation

Buttons

Mode Button (a page 15)

[]] [[]

[}] [{]

To switch Operation Screen ON, touch the center of touch panel or press [DISP] on the remote control.

……

Touch/Press and hold

[MODE]

ENTER

TILT O/C

ASP

MUTE

MODE TA

CQ-VD7001U

NAVI

OPEN / CLOSE

EJECTNAVIGATION

ASPECT

POWER

VOL

P·MODE

DISC

TUNE /

TRACK

OPEN / CLOSE

CQ-VD7001N

TILT

TEXT

ENTER

MODE

Disc title

Track title

Disc number

Title scroll

Disc selection

Current track

Track selection

Mode Button (a page 15)

Random play

Scan play

Repeat play

[] ][[ ]

[}] [{]

[MODE]

Touch panel symbols will change to indicate these current mode.

, , {D= DISC (disc)}

[] ][[ ]

[}] [{]

[RAND]

[REP]

[MODE]

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

MODE

RAND

SCAN REP

SCRL

[d]

[s]

[SCAN]

[SCRL]

[}] [{]

DVD Changer Mode Selection

Touch

“

Mode Button

”

. (

page 15)

Touch (CH-C) on the Mode Selection

Screen.

Press

[MODE]

to change to the desired

mode.

DVD VTR

RADIO

CH-C

END

……

Touch/Press and hold

¡DVD changer functions are designed for optional

Panasonic DVD changer unit. (CX-DH801N)

Preparation:

¡Connect the DVD changer, and load a magazine (discs).

Note:

¡Be sure to connect RCA cord of the Panasonic DVD

Changer to CH/AUX-IN. Otherwise the changer cannot be

controlled through this unit. (a Installation

Instructions)

¡Refer to the operating/installation instructions of

CX-DH801N as well.

Operations

DVD VTR

RADIO

CH-C

END

MP3

VCD

DVD

Compatible

Discs

Compatible

Discs

Geeignete

Discs

Disques

compatibles

Geschikte

discs

Kompatibla

skivor

Dischi

compatibili

Discos

compatibles

Kompatible

disks

DVD

Track/file Selection

Fast Forward/

Fast Reverse

Note:

¡When playing a DVD, there are cases where it is not possible to return to the

start of a chapter that spans 2 titles. (a page 61)

MP3

VCD

DVD

The speed changes if the button is held down as follows.

Regular speed / 2 times / 5 times / 10 times / 30 times

Folder Selection

MP3MP3MP3

Stop

MP3

VCD

DVD

To resume playback, touch/press

/ [5].

Pause

MP3

VCD

DVD

To resume playback, touch/press

/ [5].

[d]

[s]

[

}]

–

[

{]

[3]

[y]

Next track/file

Beginning of the current track/file

Previous track/file (Touch/press twice.)

[d]

[s]

Fast forward

Release to resume playback.

Fast reverse

Release to resume playback.

Next folder

Previous folder

Basic Operations

[RAND]

[SCAN]

[REP]

[DVD]

[RET]

[TITLE]

[AUDIO]

[ANGLE]

[SUB]

PWR MODE MENU NAVI

ASPECT SCROLL

P-MODE

NAVIGATIONPOWER

STOP

DVD MENU

TITLE/CHAPTER

ST / MONO

RANDOM

RETURN

DISP

RETDVD

RANDTITLE

AUDIO

ANGLE

SCAN REP

SUB

SCRL MUTE

VOL

123

456

PAUSE

TRACK / SEARCH

PLAY

SUBTITLE

VOL

DISC/FOLDER

CAR AV

MODE

DISP

RETDVD

RAND

SCAN REP

1 2 3

4 5 6

7 8

SUB

ANGLE

AUDIO

TITLE

[3] [y] [5]

[s] [d]

[}] [{]

[] ][[ ]

[}] [{]

[ENTER]

[0] – [9]

[DISP]

[MODE]

Title Scroll

–

[SCRL]

Scrolls the title once

3635

36 37

CQ-VD7001N CQ-VD7001N

DVD Changer Control (continued)

English

……

Touch/Press and hold

VCD

DVD

Showing menu and

selecting an item

[DVD]

–

[]] [[]

[}] [{]

[]] [[]

[}] [{]

[ENTER]

[RET]

–

q Menu appears.

w Select the desired item.

e Determine the setting.

Returns to the previous display.

q Select input mode.

w Toggles “Chapter number input

mode” and “title number input mode”.

e Input desired number.

r Playback starts.

Starting Playback

from a specific

chapter/title

[RET]

–

Returns to the previous display.

*Note on VCD:

For VCD, press

[RET]

instead of

[DVD]

[TITLE]

[0] to [9]

[ENTER]

DVD

Chapter/title/track Selection

Slow Playback

VCD

DVD

Repeat Play

MP3

VCD

DVD

MP3

VCD

DVD

Repeat Play within the

Current Disc

VCD

Note:

¡Reverse slow playback is not possible.

Scan Play

Random Play

Random Play within the

Current Folder

MP3

–

[d]

–

[REP]

Basic Operations (continued)

¡Touch/press and hold in the pause

mode.

Playback is at about 1/4 normal speed.

To resume normal playback, touch/press

/ [5].

To cancel, touch/press again.

To cancel, touch/press and hold for more

than 2 seconds again.

–

[REP]

To cancel, touch/press again.

–

[SCAN]

To cancel, touch/press again.

–

Repeat Play within the

Current Folder

MP3

To cancel, touch/press and hold for more

than 2 seconds again.

–

[REP]

–

To cancel, touch/press again.

–

[RAND]

–

[RAND]

[}]

[

{]

–

Next disc

Previous disc

Disc Selection

Note:

If no operation is performed for 10 seconds or /

[DISP]

is touched/pressed, the operation buttons disappear.

It may not be possible to switch the language unless the unit is at the DVD menu (

previous page) or is at the DVD set-

tings. (

page 46)

The language on the DVD settings takes priority when the power is turned on or the disc is loaded.

The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan-

guage/angle.

DVD

Subtitle Language

It is possible to change the subtitle language during play if multiple languages

are recorded on the disc.

Note:

¡There may be a brief delay before the subtitles appear.

DVDDVDDVD

Audio Language

It is possible to change the audio language during play if multiple audio lan-

guages are recorded on the disc.

It is possible to switch the audio between stereo sound and monaural sound (L

or R).

DVDDVDDVD

Angle

For DVDs which contain scenes which have been shot simultaneously from a

number of different angles the same scene can be viewed from each of these

different angles during play.

VCDVCDVCD

Stereo & Monaural

: stereo sound

: the left channel audio is output on both the left and right

speakers.

: the right channel audio is output on both the left and right

speakers.

MONO.R

MONO.L

STEREO

[SUB]

––

¡Press during playback.

[AUDIO]

––

¡Press during playback.

[ANGLE]

––

¡Press during playback.

[AUDIO]

––

Useful Function

Note:

¡For VCD mode, press the numerical key to enter a number directly.

¡The on-screen direct operation of the DVD menu is not available in the DVD changer mode. (

a page 22)

¡If no operation is performed for 8 seconds after you have touched [TITLE], the operation buttons disappear.

¡If the title/chapter number is inputted and no operation is performed for 2 seconds, playback will start from the number

of the title/chapter entered.

–

q Activates input mode.

w Input desired number.

e Playback starts.

Direct Track Selection

[TITLE]

[0] to [9]

[ENTER]

MP3

VCD

Chapter/title/track Selection (continued)

[RET]

–

Returns to the previous display.

Page is loading ...

Panasonic CQVD7001N Operating instructions

Brand: Panasonic

Model: CQVD7001N

Category: CD players

Type: Operating instructions

Download PDF

report

Panasonic CQVD7001N Operating instructions

Panasonic CQVD7001N Operating instructions

Related papers

Other documents