13
• Cat. 1 & 2 hitch
• 9 Forward positions, 5 reverse positions
• 5 Tilt positions
• 12” Offset left or right
• Optional hydraulic offset cylinder
• 17” Moldboard rolls the material for less drag
• 5/16” Moldboard thickness
• Retractable parking stand
for one person hook-up
• Optional gauge wheel for more
precise grading
• Landscape Rake adaptable
• Reversible cutting edge gives twice the life
• Side plates and skid shoes available
for aiding in grading
• Cat. 1 & 2 hitch
• 17” Moldboard
• 5/16” Moldboard thickness
with 3/16” reinforcement channels
• Retractable parking stand
• Manual or hydraulic adjustment
for offset, tilt and angle
• 3” Moldboard kingpin
• Optional hydraulic gauge wheel
RB35 SERIES
35 - 80 HP — 72” 84” 96”
RBT35 SERIES
35 - 80 HP — 72” 84” 96”
Make
changes
On The Go
with our 3-Way
Hydraulic Rear
Blades
Our new RBT35 Series Blade adds a new dimension to our
extensive blade line-up. Looked upon as the perfect all
around blade, the 35 Series is now offered with hydraulic
function for Tilt, Offset and Angle.
The 2” x 2” x 3/8” angle iron
reinforcement and formed top
lip provide the moldboard
with additional strength.
The heavy-duty turntable housing fits
snug to keep wear to a minimum and
to extend the life of the threaded shaft.
REAR BlADeS
/
