Paradyne 6211-I1 Quick Installation Instructions

6211-I1
Brand
Paradyne
Model
6211-I1
Category
Interface hubs
Type
Quick Installation Instructions

This manual is also suitable for

6211-I1 ADSL2+ Router
Quick Installation Instructions
Document Number 6211-A2-GZ10-10
December 2004
Installation
1. Connect your ADSL line to the port labeled LINE on the rear
panel of the device.
2. For routers with a phone port, optionally connect your
telephone to the port labeled PHONE.
3. Connect your PC or a LAN:
— Use the supplied Ethernet cable to connect your PC
directly to the router. Connect one end of the Ethernet
cable to the port labeled LAN on the router and connect
the other end to the Ethernet port of your computer.
— Alternatively, use the supplied USB cable to connect your
PC directly to the router. Connect one end of the USB
cable to the port labeled USB on the router and connect
the other end to a free USB port on your PC. Install the
USB drivers as described in the user’s guide on the CD.
— If your LAN has more than one computer, you can attach
one end of an Ethernet cable to a hub or a switch and the
other to the LAN port of the router. Either a crossover or
straight-through Ethernet cable can be used.
4. Connect the AC power adapter to the POWER connector on
the back of the device and plug the adapter into a wall outlet or
power strip.
See the user’s guide on the CD for important safety instructions and more information.
*6211-A2-GZ10-10*
*6211-A2-GZ10-10*
04-17510
LINE LAN POWERPHONE USB
OR
1
2
3
4
DEFAULT
RESET
Copyright © 2004 Paradyne Corporation.
  • Page 1 1

Paradyne 6211-I1 Quick Installation Instructions

6211-I1
Brand
Paradyne
Model
6211-I1
Category
Interface hubs
Type
Quick Installation Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents