NEC NP1250 Owner's manual

1

2

4

5

6

7

1. What You Can Do with User

Supportware 6

2. Operating Environment

4. Conﬁguring the LAN Settings

of the Projector

5.

Configuring the LAN Settings of

the PC ([Example] Wireless LAN in

Windows Vista: Ad Hoc connection)

6.

Configuring the LAN Settings of

the PC ([Example] Wireless LAN in

Windows XP: Ad Hoc connection)

7. Viewing the “User’s Guide”

and Help

Install in the PC the software stored in the User Supportware 6 CD-ROM.

This manual describes the LAN settings to use the software programs included

in the supplied User Supportware 6 CD-ROM. For how to operate each software

program, refer to “User’s Guide” (PDF) on User Supportware 6 CD-ROM.

6

L

A

M

P

S

T

A

T

U

S

P

O

W

E

R

O

N

/

S

T

A

N

D

B

Y

S

O

U

R

C

E

A

U

T

O

A

D

J

U

S

T

3

D

R

E

F

O

R

M

S

E

L

E

C

T

U

S

B

L

E

N

S

H

I

F

T

L

E

F

T

R

I

G

H

T

D

O

W

N

U

P

WIRELESS

3

3. Connecting the LAN Cable

Information on USB Wireless LAN:

In some areas and countries, the projector models described in this manual are distributed

without a USB Wireless LAN unit as standard.

If you purchase the projector without the USB Wireless LAN Unit installed and need to

connect to the projector via a wireless connection, the optional USB Wireless LAN Unit

must be installed.

NEC Projector

NP3250/NP2250/

NP1250/NP3250W

Wired and Wireless Network Setup Guide

Introduction

Thank you for purchasing an NEC projector.

The projector is equipped with the following features that enable you to give effective

presentations.

• LAN port (RJ-45), USB Wireless LAN Unit, USB port (type A), supplied as standard

• Windows Vista standard functions Network Projector and Remote Desktop can be used.

• Viewer that displays images from a USB memory device

*1

*1 The projector is not supplied with a USB memory device.

The projector is also supplied with User Supportware 6 CD-ROM in which ﬁve programs of

software are stored for effective use of these features. The software stored on this CD-ROM

are as follows.

Each program runs on Windows Vista, Windows XP or Windows 2000.

Install the software from the User Supportware 6 CD-ROM onto a PC before using.

• Image Express Utility 2.0

• Desktop Control Utility 1.0

• ArcSoft MediaImpression

• Viewer PPT Converter 3.0

• PC Control Utility 3.0

This document explains how to conﬁgure the LAN settings to use the above software programs.

For details of operations, refer to “User Supportware 6 User’s Guide” on User Supportware

6 CD-ROM and help function of the software.

When selecting WPA-PSK/WPA-EAP/WPA2-PSK/WPA2-EAP for wireless LAN security type,

refer to “WPA Setting Guide” on the User’s Manual CD-ROM.

For the network settings on the personal computer, refer to the User’s Manual for the personal

computer or the peripheral equipment for the network.

Use a wireless LAN card conforming to the Wi-Fi standard for your personal computer.

The projector shown in the illustrations in this manual is the NP3250.

NOTES

(1) The contents of this guide may not be reprinted in part or whole without permission.

(2) The contents of this guide are subject to change without notice.

(3) Great care has been taken in the preparation of this guide; however, should you notice

any questionable points, errors or omissions, please contact us.

(4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of proﬁt or

other matters deemed to result from using the Projector.

3

Important Information

USB Wireless LAN Unit

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:(1) this device may not cause harmful interference and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B Personal

Computer and Peripheral, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This equipment has been tested to comply with the limits for a Class B personal computer and

peripheral, pursuant to Subpart B of Part 15 of FCC Rules. Only peripherals (computer input/

output devices, terminals, printers, etc.) certiﬁed (DoC) or veriﬁed to comply with Class B limits

may be attached to this equipment. Operation with noncertiﬁed (DoC) or non-veriﬁed personal

computer and/or peripherals is likely to result in Interference to radio and TV reception.

The connection of a unshielded equipment interface cable to this equipment will invalidate the

FCC Certiﬁcation of this device and may cause interference levels which Exceed the limits

established by FCC for equipment.

You are cautioned that changes or modiﬁcations not expressly approved by the party

responsible for compliance could void your authority to operate the equipment.

Regulatory Information/Disclaimers

Installation and use of this Wireless LAN device must be in strict accordance with the instructions

included in the user documentation provided with the product. Any changes or modiﬁcations (including

the antennas) made to this device that are not expressly approved by the manufacturer may void

the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or

television interference caused by unauthorized modiﬁcation of this device, or the substitution of the

connecting cables and equipment other than manufacturer speciﬁed. It is the responsibility of the user

to correct any interference caused by such unauthorized modiﬁcation, substitution or attachment.

Manufacturer and its authorized resellers or distributors will assume no liability for any damage or

violation of government regulations arising from failing to comply with these guidelines.

4

Important Information

Caution

To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter

must be installed to provide a separation distance of at least 7.87"/20cm from all persons and

must not be co-located or operating in conjunction with any other antenna or transmitter.

SAR compliance has been established in typical laptop computer(s) with USB slot, and

product could be used in typical laptop computer with USB slot. Other application like

handheld PC or similar device has not been veriﬁed and may not compliance with related

RF exposure rule and such use shall be prohibited.

Usage restrictions in North America

The following channels can be used indoors only.

• In the United States and Canada: 36, 40, 44, and 48 channels

• In Mexico:149, 153, 157, 161, and 165 channels

The other channels can be used both indoors and outdoors.

This Class B digital apparatus complies with Canadian RSS-210.

Cet appareil numerique de la Classe B est conforme a la norme CNR-210 du Canada.

To comply with Canada RSS-210 (Issue 7) section A9.4 (b) (ii); this radio product will not

transmit on any channels operating in the exclusion band of 5600 - 5650MHz. All channels in

the 5600 ~ 5650MHz band are disabled by factory ﬁrmware and are not user changeable.

Regulatory Statement:

Operation of this device is subjected to the following National regulations and may be prohibited

to use if certain restriction should be applied.

France:

Outdoor use limited to 10mW e.i.r.p. within the band 2454 – 2483.5 MHz. Derogation in French overseas

departments of Guyane and La Reunion: outdoor use not allowed in band 2400 - 2420 MHz.

Hereby, NEC Display Solutions, Ltd. declares that this USB Wireless LAN Unit (Model: NP01LM) is in

compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Cautions on security when using wireless LAN products

With a wireless LAN, radio waves are used instead of LAN cables for the exchange of data

between the wireless access points (computers, etc.), offering the advantage that LAN

connections can be made freely within the range of the radio waves.

On the other hand, the radio waves reach all points within this range, regardless of walls or other obstacles,

possibly resulting in the problems described below if the proper security measures are not taken.

• Contents of transmissions may be intercepted

Malicious third parties may purposely intercept the radio waves and steal information

contained in the transmissions, including such personal information as ID numbers,

passwords, credit card numbers, e-mail messages, etc.

5

Important Information

• Improper intrusions

Malicious third parties may without permission access the personal or company network

and steal personal or conﬁdential information, pretend to be someone else and leak

incorrect information, rewrite information that has been intercepted, introduce computer

viruses or otherwise damage data or the system, etc.

Wireless LAN cards and wireless access points generally include security measures for

dealing with these problems. Making the proper security settings before using the products

can reduce the risk of such problems arising.

We recommend that you fully understand the problems that can arise when using the products

without making the security settings, then that you make the security settings based on your

own decision and at your own discretion.

Cautions on Usage

Warning

•

The USB Wireless LAN Unit is not meant for use with facilities or equipment involving the

safeguard of human life, such as medical equipment, nuclear facilities or equipment, aeronautical

or space equipment, transportation facilities or equipment, etc., or with facilities or equipment

requiring high levels of reliability. Do not use the USB Wireless LAN Unit in such cases.

• Do not use the USB Wireless LAN Unit near cardiac pacemakers.

• Do not use the USB Wireless LAN Unit near medical equipment. Doing so may cause

electromagnetic interference with the medical equipment, possible leading to death.

• Do not disassemble or modify the USB Wireless LAN Unit in any way. Doing so could lead

to ﬁre or electric shock.

• Do not use the USB Wireless LAN Unit in wet or moist places, such as in bathrooms or

near humidiﬁers. Doing so could lead to ﬁre, electric shock or malfunction.

Caution

To prevent damage due to static electricity, eliminate any static electricity from your body

before touching the USB Wireless LAN Unit.

• Static electricity from the human body may damage the USB Wireless LAN Unit. Before

touching the USB Wireless LAN Unit, touch an aluminum sash, a door knob, or some

other metal object around you to eliminate the static electricity.

Caution

The radio waves used by the USB Wireless LAN Unit pass through the wood or glass used

in normal homes (but not through window panes with built-in metallic mesh).

The radio waves do not pass through iron reinforcing bars, metal or concrete, however, so

the USB Wireless LAN Unit cannot be used for communicating through walls or ﬂoors made

with these materials.

6

Speciﬁcations

For United States, Canada, and Mexico

Product Name NP01LM3

Operating Voltage 5V (power supplied from the projector)

Max Amps Tx: 472 mA (Max)

Rx: 300 mA (Max)

Wireless Standard IEEE802.11a, IEEE802.11b, IEEE802.11g

Modulation Method CCK/DQPSK/DBPSK/OFDM

LED Display

(Blue)

During communication: blinking

Standby: slow blinking

No operation: light off

IEEE802.11a Center

Frequency

Range/Operating

channels

5150 to 5350, 5725 to 5850 MHz

36,40,44,48,52,56,60,64,149,153,157,161,165

channels

Transmission

method

OFDM method (Orthogonal Frequency Division

Multiplexing method)

Data Rates 54/48/36/24/18/12/9/6 (Mbps)

IEEE802.11b Center

Frequency

Range/Operating

channels

2412 to 2462 MHz

1 to 11 channels

Transmission method DS-SS method (direct dispersion spectrum dispersion

method)

Data Rates 11/5.5/2/1 (Mbps)

IEEE802.11g Center

Frequency

Range/Operating

channels

2412 to 2462 MHz

1 to 11 channels

Transmission method OFDM method (Orthogonal Frequency Division

Multiplexing method)

Data Rates 54/48/36/24/18/12/9/6 (Mbps)

Interface USB 2.0 (connected to USB wireless LAN port on the projector)

Dimensions Width:1.1"/28 mm

Height:0.43"/11 mm

Length:3.03"/77 mm

Weight 0.042 lbs/19 g

Environmental

Considerations

Operational Temperatures :

41° to 104°F / 5° to 40°C, 20% to 80% humidity (non-condensing)

Storage Temperatures :

14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)

7

Speciﬁcations

A wireless LAN can be used in the following countries and areas.

Using a wireless LAN in a country or area other than the following may infringe the radio wave

laws of the country where it is used.

Austria / Belgium / Bulgaria / Cyprus / Czech / Denmark / Estonia /Finland / France / Germany /

Greece / Hungary / Iceland / Ireland /Italy / Latvia / Liechtenstein / Lithuania / Luxembourg /

Malta /Norway / Poland / Portugal / Romania / Slovak / Slovenia / Spain /Sweden / Switzerland /

The Netherlands / United Kingdom

Product Name NP01LM2

Operating Voltage 5V (power supplied from the projector)

Max Amps Tx: 472 mA (Max)

Rx: 300 mA (Max)

Wireless Standard IEEE802.11a, IEEE802.11b, IEEE802.11g

Modulation Method CCK/DQPSK/DBPSK/OFDM

LED Display

(Blue)

During communication: blinking

Standby: slow blinking

No operation: light off

IEEE802.11a Center

Frequency

Range/Operating

channels

5150 to 5250, 5250 to 5350, 5470 to 5725 MHz

36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,

120, 124, 128, 132, 136, 140 channels

Transmission

method

OFDM method (Orthogonal Frequency Division

Multiplexing method)

Data Rates 54/48/36/24/18/12/9/6 (Mbps)

IEEE802.11b Center

Frequency

Range/Operating

channels

2412 to 2472 MHz

1 to 13 channels

Transmission

method

DS-SS method (direct dispersion spectrum dispersion

method)

Data Rates 11/5.5/2/1 (Mbps)

IEEE802.11g Center

Frequency

Range/Operating

channels

2412 to 2472 MHz

1 to 13 channels

Transmission

method

OFDM method (Orthogonal Frequency Division

Multiplexing method)

Data Rates 54/48/36/24/18/12/9/6 (Mbps)

Interface USB 2.0 (connected to USB wireless LAN port on the projector)

Dimensions Width:1.1"/28 mm

Height:0.43"/11 mm

Length:3.03"/77 mm

Weight 0.042 lbs/19 g

Environmental

Considerations

Operational Temperatures :

41° to 104°F / 5° to 40°C, 20% to 80% humidity (non-condensing)

Storage Temperatures :

14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)

8

Contents

Introduction ..................................................................................Inside cover

Important Information ....................................................................................3

Speciﬁcations .................................................................................................6

Contents ..........................................................................................................8

1. What You Can Do with User Supportware 6 ............................................9

1-1. Image Express Utility 2.0 ........................................................................................9

1-2. Desktop Control Utility 1.0 ....................................................................................11

1-3. ArcSoft MediaImpression ......................................................................................12

1-4. Viewer PPT Converter 3.0 ....................................................................................13

1-5. PC Control Utility 3.0 ............................................................................................13

2. Operating Environment ...........................................................................14

2-1. Supported Projectors ............................................................................................14

2-2. Supported wireless LAN security functions ..........................................................14

2-3. Operating Environment .........................................................................................15

3. Connecting the LAN Cable .....................................................................16

4. Conﬁguring the LAN Settings of the Projector .....................................17

4-1. Displaying On-Screen Menu (NETWORK SETTINGS) ........................................17

4-2. Wireless LAN ........................................................................................................19

4-3. Wired LAN ............................................................................................................28

5. Conﬁguring the LAN Settings of the PC

([Example] Wireless LAN in Windows Vista: Ad Hoc connection) ............ 30

6. Conﬁguring the LAN Settings of the PC

([Example] Wireless LAN in Windows XP: Ad Hoc connection) ................ 34

7. Viewing the “User’s Guide” and Help ......................................................39

7-1. Displaying “User’s Guide” (PDF) .............................................................................39

7-2. Using Help ..............................................................................................................41

9

1. What You Can Do with User Supportware 6

What You Can Do with User Supportware 6

1

1. What You Can Do with User Supportware 6

1-1. Image Express Utility 2.0

Image Express Utility 2.0 is a software tool used to send the screen of your personal computer

to the projector via a network without cables.

l High-speed, high-quality image transmissions based on NEC’s original

compression algorithm

NEC’s original compression algorithm allows high-quality images to be sent over the

network at high speed, from your personal computer to the projector.

L

A

M

P

S

T

A

T

U

S

P

O

W

E

R

O

N

/

S

T

A

N

D

B

Y

S

O

U

R

C

E

A

U

T

O

A

D

J

U

S

T

3

D

R

E

F

O

R

M

S

E

L

E

C

T

U

S

B

L

E

N

S

H

I

F

T

L

E

F

T

R

I

G

H

T

D

O

W

N

U

P

WIRELESS

l Simultaneous projection by multiple projectors

Images can be sent from a personal computer to not only one projector but also to two or

more projectors at the same time.

L

A

M

P

S

T

A

T

U

S

P

O

W

E

R

O

N

/

S

T

A

N

D

B

Y

S

O

U

R

C

E

A

U

T

O

A

D

J

U

S

T

3

D

R

E

F

O

R

M

S

E

L

E

C

T

U

S

B

L

E

N

S

H

I

F

T

L

E

F

T

R

I

G

H

T

D

OW

N

U

P

WIRELESS

L

A

M

P

S

T

A

T

U

S

P

O

W

E

R

O

N

/

S

T

A

N

D

B

Y

S

O

U

R

C

E

A

U

T

O

A

D

J

U

S

T

3

D

R

E

F

O

R

M

S

E

L

E

C

T

U

S

B

L

E

N

S

H

I

F

T

L

E

F

T

R

I

G

H

T

DO

WN

U

P

WIRELESS

l “Easy Connection” function for connecting wireless LAN

By using “Easy Connection” function

*1

, the complicated setting of wireless LAN can be

simpliﬁed.

*1 This function can be used when Windows XP is used as the OS and when you have a “Computer

Administrator” privilege. If the OS is Windows Vista, input of logon password as “Administrator”

may be prompted.

The “Easy Connection” function cannot be used with Windows 2000.

10

1. What You Can Do with User Supportware 6

l Projected images can be transferred and saved to personal computers.

When “Meeting Mode” is used, projected images can be sent to the personal computers

of all the participants (attendants) of a “Meeting”. The received images can be saved to

your personal computer with a memo (text data) attached.

l 1-click switching of presenter

When switching to another presenter during the conference, the participants (attendants)

can simply click a button to switch over to the new presenter.

l Central management of the projecting personal computer

Using the Training Mode allows you to use a single personal computer (Manager) to

manage which personal computer (Attendant) projects. Possible operation includes

switching projecting personal computers to project from, as well as temporarily terminating

communication with the projector.

Note

L

AM

P

STA

TU

S

PO

WE

R

ON/

STAND

BY

SOURCE

AUT

O

ADJU

ST

3D RE

FORM

SEL

E

C

T

US

B

LENS

SHIFT

LEF

T

R

I

G

HT

DOWN

U

P

WIRELESS

Attendant

Presenter

L

AMP

S

T

A

T

US

PO

W

E

R

ON

/

S

T

A

N

D

B

Y

S

O

U

R

C

E

A

U

T

O

A

D

JUS

T

3

D

REF

O

R

M

S

E

L

E

C

T

U

S

B

LE

N

S

H

IFT

LE

F

T

RIGHT

DOW

N

UP

WIRELESS

Attendant A

Attendant CAttendant B

Manager

Attendant D (presenter)

Mr. D, please start

your presentation.

The Training Mode is not installed via the “Typical” installation option when Image Express

Utility 2.0 is installed.

To use Training Mode, select “Extension” installation option on the install selection screen

that is displayed while Image Express Utility 2.0 installation is in progress, and select

“Training (Attendant)” or “Training (Manager)”.

11

1. What You Can Do with User Supportware 6

What You Can Do with User Supportware 6

1

1-2. Desktop Control Utility 1.0

Desktop Control Utility 1.0 is software that operates the desktop screen of a personal computer

at a remote location from the projector by using a network.

l A commercially available USB mouse is connected to the projector to operate the personal

computer.

l Suppose, for example, a PowerPoint ﬁle to be presented in a conference is saved to a

personal computer in your ofﬁce. If this personal computer is connected to the projector

in the conference room with LAN when the conference is held, the desktop screen of the

personal computer in your ofﬁce (Windows Vista/Windows XP/Windows 2000) can be

projected and the PowerPoint ﬁle can be presented by operating the projector. In other

words the personal computer does not need to be brought into the conference room.

Important

LAM

P

STATU

S

PO

W

ER

ON/

S

T

A

ND

BY

SOURC

E

AUT

O ADJUST

3D R

EFO

RM

SELE

CT

U

SB

LENS

S

HIFT

LE

FT

R

I

GHT

DOWN

U

P

WIRELESS

Conference room

Ofﬁce

• You can use the Desktop Control Utility 1.0 to operate a personal computer located in

a separate room from the projector over a network. Therefore, care must be exercised

to prevent any third party from viewing the screen of your personal computer (important

documents), copying ﬁles, or turning off the power.

NEC assumes no liability for any loss or damages arising from information leaks or

system failures while you are using Desktop Control Utility 1.0.

• In the Windows operating system, select [Control Panel] → [Hardware and Sound] →

[Power Options]. Set [Change when the computer sleeps] to [Never] (in the case of

Windows Vista). This will disconnect the LAN connection when the personal computer

enters standby mode while the Desktop Control Utility 1.0 is being used.

• The screen saver function is turned off while Desktop Control Utility 1.0 is running.

12

1. What You Can Do with User Supportware 6

1-3. ArcSoft MediaImpression

ArcSoft MediaImpression is a multimedia image ﬁle management tool developed by ArcSoft,

Inc. This tool has functions to capture images from a digital camera or scanner and to process

or edit images, as well as image ﬁle management functions. In addition, slideshows and screen

savers can also be easily created.

l ArcSoft MediaImpression in the User Supportware 6 CD-ROM has functions that allow

you to use the projector more conveniently, in addition to the functions that come with the

software, for when an NEC projector is connected.

Additional functions are listed below.

For details of each function, refer to the help function of ArcSoft MediaImpression.

• Send Image

Sends images to the projector.

• Converting PowerPoint ﬁle

Converts a PowerPoint ﬁle into an image ﬁle.

• Send Logo

Registers an image ﬁle as the logo data of the projector.

• Capture

Saves the screens of the personal computer as image ﬁles.

• Start Slide Show

Sends the image of a slideshow to the projector and executes the slideshow on the

projector.

• Viewer Output

Converts a slideshow into an index ﬁle that can be played back by the viewer function

of the projector and outputs the index ﬁle.

• Connection Selection

Select the projector to connect.

l

The personal computer and projector may be connected with wired LAN or wireless LAN.

13

1. What You Can Do with User Supportware 6

What You Can Do with User Supportware 6

1

1-4. Viewer PPT Converter 3.0

Viewer PPT Converter 3.0 is software that converts ﬁles created with PowerPoint 95/97/

2000/2002/2003/2007 into an index ﬁle that can be displayed with the viewer function of the

projector.

l When converting, specify a USB memory device as the destination to which the index ﬁle

is to be saved. Then you can easily make your presentation by simply inserting the USB

memory device into the projector (viewer function of the projector).

l If PowerPoint 2000/2002/2003/2007 is installed in your personal computer, you can

activate Viewer PPT Converter 3.0 from PowerPoint (PPT Converter add-in is automatically

registered to PowerPoint).

1-5. PC Control Utility 3.0

PC Control Utility 3.0 is software that allows you to operate the projector from the personal

computer when the personal computer and the projector are connected with LAN (wired or

wireless) or a serial cable.

l You can operate the projector as follows from your personal computer.

For details of each function, refer to the help function of PC Control Utility 3.0.

• Power on/off

• Input signal switching

• Muting (temporarily disabling audio/video)

• Freezing (locking the projected image)

• Logo image transmission

14

2. Operating Environment

2-1. Supported Projectors

User Supportware 6 supports the following NEC projectors (as of April 2009)

NP Series NP3250/NP2250/NP1250/NP3250W

Reference

Some of the software can be used with projectors other than the above projectors. For

details, refer to the help function of each software.

2-2. Supported wireless LAN security functions

The projector supports the wireless LAN security called WPA-PSK, WPA-EAP, WPA2-PSK, and

WPA2-EAP (encryption type:TKIP/AES) as well as WEP. WPA-PSK, WPA-EAP, WPA2-PSK,

and WPA2-EAP (TKIP/AES) provide stronger security than WEP. For details on settings for

“WPA-PSK/WPA-EAP/WPA2-PSK/WPA2-EAP”, refer to “WPA Setting Guide” on the User’s

Manual CD-ROM.

l The projector’s WPA-PSK, WPA-EAP, WPA2-PSK, or WPA2-EAP supports the TKIP or

AES encryption type.

l WPA-PSK, WPA-EAP, WPA2-PSK, or WPA2-EAP is available only when “INFRASTRUCTURE”

is selected in “NETWORK TYPE” of the “CONNECTION” page.

15

2

2. Operating Environment

Operating Environment

2-3. Operating Environment

The following is the operating environment for Image Express Utility 2.0. For the operating

environment of other software, please refer to the help function of each software.

Supported OS Windows Vista (32-bit version) Home Basic

Windows Vista (32-bit version) Home Premium

Windows Vista (32-bit version) Business

Windows Vista (32-bit version) Ultimate

Windows Vista (32-bit version) Enterprise

Windows XP Home Edition Service Pack 2 or later

Windows XP Professional Service Pack 2 or later

Windows XP Tablet PC Edition

(Windows XP Tablet PC Edition Service Pack 2 or later)

Windows 2000 Professional Service Pack 4 or later

• Windows power-saving function is not supported.

• The “Easy Connection” supports the “Administrator” privilege of Windows

Vista or the “Computer Administrator” privilege of Windows XP.

Supported hardware IBM PC/AT compatible personal computers

CD-ROM drive required for installation

CPU • Windows Vista

Pentium 4/Pentium M of 800 MHz or higher required

Dual core CPU of at least 1 GHz is recommended

• Windows XP/2000

Sender personal computer

Pentium MMX processor or higher required

Pentium 800 MHz or higher recommended

Recipient personal computer

Pentium III 800 MHz or higher required

Pentium 4 1.6 GHz or higher recommended

Memory • Windows Vista

512 MB or more required (1 GB or more recommended).

• Windows XP

128 MB or more required (192 MB or more recommended)

• Windows 2000

64 MB or more required (128 MB or more recommended)

More memory may be necessary if other applications run at the same

time.

Graphic processor

(Windows Vista)

The “Graphics” score of “Windows Experience Index”

recommends 3.0 or more.

Network environment TCP/IP-compatible wired LAN or wireless LAN environment required

Resolution 1024 dots x 768 lines recommended

1024 dots x 768 lines - 1280 dots x 800 lines recommended (NP3250W)

Screen Colors High Color (15 bits, 16 bits)

True Color (24 bits, 32 bits)

• 256 or fewer colors are not supported.

16

3. Connecting the LAN Cable

Connect a LAN cable to the LAN port (RJ-45) of the projector when connecting the projector

to wired LAN.

After connecting the LAN cable to the projector, set the required settings for the projector

( next page).

WIRELESS

USB(LAN)

WIRELESS

LAN

LAN cable

(commercially available)

Server

HUB, etc.

17

4. Conﬁguring the LAN Settings of the Projector

Conﬁguring the LAN Settings of the Projector

4

4. Conﬁguring the LAN Settings of the Projector

Reference

For details on how to turn on/off the power to the projector and how to operate the buttons

and remote control of the projector, refer to “User’s Manual” included in the User’s Manual

CD-ROM.

4-1. Displaying On-Screen Menu (NETWORK SETTINGS)

Preparation:

Turn on the power to the projector and project images to the screen.

It is not necessary to select the signals.

1

Press the button.

The on-screen menu is displayed.

2

Use the button to select the Setup submenu.

3

Press the button.

The “BASIC” tab is highlighted.

18

4. Conﬁguring the LAN Settings of the Projector

4

Press the button to highlight the “INSTALLATION (2)” tab.

5

Press the

SELECT 

button to highlight “NETWORK SETTINGS”, and press

the button.

The “NETWORK SETTINGS” screen is displayed.

• To make setting of wireless LAN

Proceed to “4-2. Wireless LAN” ( next page).

• To make setting of wired LAN

Proceed to “4-3. Wired LAN” ( page 28).

19

4. Conﬁguring the LAN Settings of the Projector

Conﬁguring the LAN Settings of the Projector

4

4-2. Wireless LAN

When connecting the wireless LAN, conﬁgure the LAN settings in the “WIRELESS” page of

“NETWORK SETTINGS” selected from On-Screen Menu.

Note

n Conﬁguration ﬂowchart

Setting of “CONNECTION”.

Select SSID in “SITE SURVEY”.

Input “SSID” (if necessary).

Select “NETWORK TYPE” (if necessary).

Select “CHANNEL” (if necessary).

Setting of “SECURITY”

Select “SECURITY TYPE”.

Select “KEY SELECT”.

Set “KEY 1 to KEY 4”.

If “EASY CONNECTION” is selected

8

9

10

11

12

13

14

15

16

1

3

Step

Display “WIRELESS” page of “NETWORK SETTINGS”.

4

Step Input “IP ADDRESS”.

2

Step Select “PROFILES”.

5

Step Input “SUBNET MASK”.

6

Step Input “GATEWAY”.

7

Step Input “DNS CONFIGURATION”.

17

Step Confirm the “ADVANCED” settings.

18

Step Reconnect to the network.

19

Step Confirm the settings.

Step - Setting of “ADVANCED”.

Step Enable or disable “DHCP”.

If “Disabled” (without check mark)

If “Enabled” (with check mark)

The wireless LAN cannot be used with VT800.

20

4. Conﬁguring the LAN Settings of the Projector

n Setting Wireless LAN

1

Display the “WIRELESS” page of “NETWORK SETTINGS”.

Conﬁgure the setting of wireless LAN in the “WIRELESS” page of “NETWORK SETTINGS” selected

from On-Screen Menu.

<1> In the “NETWORK SETTINGS” setting window, if the “GENERAL” tab is highlighted, press the

button to highlight “WIRELESS”.

The “WIRELESS” page is displayed.

• If “NETWORK SETTINGS” is not displayed, refer to “4-1. Displaying On-Screen Menu (NETWORK

SETTINGS)” ( page 17).

2

Select “PROFILES”.

<1> Press the

SELECT 

button once to highlight the “PROFILES” ﬁeld and press the

button.

<2> Use the

SELECT  /

button to highlight “PROFILE 1”, and press the button.

• “PROFILE 1” or “PROFILE 2” can be stored in the memory of the projector as the setting for

LAN.

• “EASY CONNECTION” is a mode in which the personal computer that runs Image Express Utility

2.0 in the User Supportware 6 CD-ROM is easily connected to wireless LAN.

Note that “EASY CONNECTION” does not support software other than Image Express Utility

2.0.

• When “EASY CONNECTION” is selected, the IP ADDRESS and SUBNET MASK do not have

to be set. To use “EASY CONNECTION”, the Windows user account must have [Administrator]

privilege (Windows Vista) or [Computer Administrator] privilege (Windows XP). It cannot be used

with Windows 2000.

Page is loading ...

NEC NP1250 Owner's manual

NEC NP1250 Owner's manual

Related papers

Other documents